Konica Minolta BIZHUB 500 User manual

1 Installation and Operation Precautions
2 Before Making Copies
3 Basic Copy Operations
4 Combine Originals/ Original Image Type
5 Application Functions
6 Finishing/ Folding
7 Advanced Information
8 Job Management (Job List)
9 Paper and Original Information
10 Supplies & Handling
11 Troubleshooting
12 Machine Maintenance
13 Specifications
14 Utility <User Setting>
15 Utility <Administrator Setting>
User’s Guide [Copy Operations]
Copyright
2006
Printed in China
2006. 1
50GE97340
http://konicaminolta.com
●This manual was printed using 100% post-consumer recycled paper.
●This manual was printed with soy ink.
User’s Guide [Copy Operations]

Introduction
bizhub 500/420 x-1
Introduction
Thank you for choosing this machine.
This manual contains details on the operation of the various functions of the
machine, precautions on its use, and basic troubleshooting procedures. In
order to ensure that this machine is used correctly and efficiently, carefully
read this manual before using the machine. After reading the manual, store
it in the designated holder so that it can easily be referred to when questions
or problems arise during operation.
The illustrations used in this manual may appear slightly different from views
of the actual equipment.
bizhub_500.book 1 ページ ２００６年１月２５日 水曜日 午後６時３９分

Introduction
x-2 bizhub 500/420
Energy Star®
As an ENERGY STAR®Partner, we have determined that this machine meets
the ENERGY STAR®Guidelines for energy efficiency.
What is an ENERGY STAR®Product?
An ENERGY STAR®product has a special feature that allows it to automat-
ically switch to a “low-power mode” after a period of inactivity. An ENERGY
STAR®product uses energy more efficiently, saves you money on utility bills
and helps protect the environment.
Low Power
This function conserves energy by lowering the power consumption to 105
W in standby mode. In the standard setting, Low Power operates automati-
cally when 15 minutes (bizhub 500)/1 minute (bizhub 420) have elapsed after
completion of the last copy, with the copier remaining in the ready to copy
state during that time.
The time period for the low Power function can be set for 1 to 240 minutes in
1 minute increments.
Sleep
This function achieves further energy conservation by partially turning the
power supply OFF, thereby reducing energy consumption to 2.2 W or less.
In the standard setting, Sleep follows Low Power, operating automatically
when 90 minutes (bizhub 500)/15 minutes (bizhub 420) have elapsed after
completion of the last copy, with the copier remaining in the ready to copy
state during that time.
The time period for the Sleep function can be set for 1 to 240 minutes in 1
minute increments.
Automatic Duplex Copying
To reduce paper consumption, use this function to make double-sided (du-
plex) copies, automatically.
We recommend that you utilize the Low Power function, Sleep function, and
Automatic Duplex Copying function.
bizhub_500.book 2 ページ ２００６年１月２５日 水曜日 午後６時３９分

Introduction
bizhub 500/420 x-3
Trademarks and Registered Trademarks
KONICA MINOLTA, KONICA MINOLTA Logo, and The essentials of imaging
are registered trademarks or trademarks of KONICA MINOLTA HOLDINGS,
INC.
PageScope and bizhub are registered trademarks or trademarks of KONICA
MINOLTA BUSINESS TECHNOLOGIES, INC.
Netscape Communications, the Netscape Communications logo, Netscape
Navigator, Netscape Communicator, and Netscape are trademarks of Net-
scape Communications Corporation.
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EX-
PRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AU-
THOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCI-
DENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILI-
TY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
The licence and distribution terms for any publically available version or de-
rivative of this code cannot be changed. i.e. this code cannot simply be cop-
ied and put under another distribution licence [including the GNU Public
Licence.]
All other product names mentioned are trademarks or registered trademarks
of their respective companies
bizhub_500.book 3 ページ ２００６年１月２５日 水曜日 午後６時３９分

Introduction
x-4 bizhub 500/420
Contents
Introduction
Energy Star® ......................................................................................x-2
What is an ENERGY STAR® Product? ...........................................x-2
Low Power ......................................................................................x-2
Sleep ...............................................................................................x-2
Automatic Duplex Copying .............................................................x-2
Trademarks and Registered Trademarks .......................................x-3
Contents .............................................................................................x-4
Available Features ...........................................................................x-18
Automatically selecting the paper .................................................x-18
Specifying separate horizontal and vertical zoom ratios ..............x-18
Adjusting copies to the size of the paper .....................................x-18
Scanning the original in separate batches ....................................x-18
Copying multiple original pages onto a single page .....................x-19
Copying an original containing various page sizes .......................x-19
Adjusting copies according to the image quality of the original ...x-19
Inserting paper between copies of overhead projector transparencies x-19
Adding a cover page/insertion ......................................................x-20
Inserting copies of a different original at a specified location ......x-20
Copying with chapter title pages on the front side .......................x-20
Separately copying a page spread ...............................................x-21
Repeating copy images ................................................................x-21
Splitting an original page into two copies .....................................x-21
Copying with a layout for center binding ......................................x-22
Copying with reversed colors .......................................................x-22
Making copies for filing .................................................................x-22
Erasing sections of copies ............................................................x-23
Adjusting the image to fit the paper size ......................................x-23
Printing distribution text on copies ...............................................x-23
Sorting copies ...............................................................................x-24
Stapling copies .............................................................................x-24
Punching holes in copies ..............................................................x-24
Center folding/binding ..................................................................x-25
Printing a sample copy .................................................................x-25
Checking the copy settings ..........................................................x-25
Interrupting a copy job ..................................................................x-25
Programming copy settings ..........................................................x-25
Displaying explanations of functions and settings .......................x-25
Managing jobs ..............................................................................x-26
Enlarging the size of text in touch panel screens .........................x-26
Explanation of Manual Conventions ..............................................x-27
bizhub_500.book 4 ページ ２００６年１月２５日 水曜日 午後６時３９分

Introduction
bizhub 500/420 x-5
Descriptions and Symbols for Original and Paper ...................... x-28
“Width” and “Length” ....................................................................x-28
Paper Orientation ..........................................................................x-28
User’s Guides .................................................................................. x-29
User’s Guide [Copy Operations] <this manual> ...........................x-29
User’s Guide [Network Scanner Operations] ................................x-29
User’s Guide [Box Operations] .....................................................x-29
User’s Guide [Enlarge Display Operations] ...................................x-29
User’s Guide [Fax Operations] ......................................................x-29
IC-204 User’s Guide .....................................................................x-30
Legal Restrictions on Copying ...................................................... x-31
1 Installation and Operation Precautions
1.1 Safety Information ............................................................................ 1-2
Warning and Precaution Symbols .................................................. 1-2
Meaning of Symbols ...................................................................... 1-2
1.2 Regulation Notices ........................................................................... 1-9
CE Marking (Declaration of Conformity) for Users of the European
Union (EU) ...................................................................................... 1-9
USER INSTRUCTIONS FCC PART 15 - RADIO FREQUENCY
DEVICES (For U.S.A. Users) .......................................................... 1-9
INTERFERENCE-CAUSING EQUIPMENT STANDARD
(ICES-003 ISSUE 4) (For Canada Users) ....................................... 1-9
For Users in countries not subject to Class B regulations ........... 1-10
Laser Safety ................................................................................. 1-10
Ozone Release ............................................................................. 1-12
Acoustic noise (For European Users Only) .................................. 1-12
1.3 Caution Notations and Labels ....................................................... 1-13
1.4 Space Requirements ...................................................................... 1-15
1.5 Operation Precautions ................................................................... 1-17
Power Source ............................................................................... 1-17
Operating Environment ................................................................ 1-17
Storage of Copies ........................................................................ 1-17
2 Before Making Copies
2.1 Machine Configuration ..................................................................... 2-2
External .......................................................................................... 2-2
Internal ........................................................................................... 2-6
Options ........................................................................................... 2-8
Paper Feed Cabinet PC-202/PC-402 .......................................... 2-10
Large Capacity Unit LU-201 ........................................................ 2-12
Finisher FS-510/Output Tray OT-601/Punch Unit PU-501 .......... 2-14
bizhub_500.book 5 ページ ２００６年１月２５日 水曜日 午後６時３９分

Introduction
x-6 bizhub 500/420
Saddle Stitcher SD-502/Mailbin Kit MT-501 ................................2-16
Finisher FS-511/Relay Unit RU-502 ..............................................2-18
Control Panel ................................................................................2-20
Basic Screen and Icons ................................................................2-22
Icons shown in the icon display area ............................................2-23
2.2 Adjusting Angle of the Control Panel ...........................................2-24
To adjust the angle of the control panel .......................................2-25
2.3 Turning On/Off the Power ...............................................................2-26
Turning on the machine ................................................................2-26
Turning off the machine ................................................................2-28
Automatically Returning to the Default Settings
(Automatic Panel Reset) ................................................................2-30
Automatically Returning to the Priority Screen
(Automatic System Reset) ............................................................2-30
2.4 To Use Machine When Power Save Indicator Lights ...................2-31
To activate the machine ................................................................2-31
Automatically Conserving Energy (Low Power Mode) ..................2-32
To interrupt the low power mode to activate the machine ...........2-32
Automatically Conserving Energy (Sleep Mode) ...........................2-33
To interrupt the sleep mode to activate the machine ...................2-34
Manually Conserving Energy ........................................................2-35
Limiting Machine Usage (Weekly Timer) .......................................2-36
Operating the Machine During Non-Business Hours (Weekly Timer) .2-37
2.5 Making Authentication ....................................................................2-39
To enter a user name and password (user authentication) ...........2-39
To enter an account name and password (account track) ...........2-42
2.6 Loading Paper ..................................................................................2-46
To load paper in tray 1/2 (or tray 3/4) ...........................................2-47
To load paper in tray 3 ..................................................................2-50
To load paper into a large capacity unit .......................................2-53
To load paper into the bypass tray ...............................................2-55
2.7 Incompatible Copy Settings ...........................................................2-61
To give priority to the copy setting specified following the first setting ... 2-61
To give priority to the copy setting specified first .........................2-62
3 Basic Copy Operations
3.1 General Copy Operation ...................................................................3-2
How to make a basic copy .............................................................3-2
3.2 Positioning the Original .....................................................................3-7
To position originals into the ADF ...................................................3-7
To position the original on original glass ........................................3-9
bizhub_500.book 6 ページ ２００６年１月２５日 水曜日 午後６時３９分

Introduction
bizhub 500/420 x-7
3.3 Setting Print Quantity ..................................................................... 3-12
To set print quantity ..................................................................... 3-12
To change print quantity .............................................................. 3-13
3.4 Density Setting ................................................................................ 3-14
To adjust Density/Background Removal ..................................... 3-14
3.5 Paper Size Setting .......................................................................... 3-16
To select paper size automatically (Auto Paper Select) ............... 3-16
To select paper size manually ...................................................... 3-18
3.6 Paper Setting for Bypass Tray ....................................................... 3-20
To automatically detect the paper size (Auto Detect) .................. 3-20
To specify/recall non-standard size (Custom Size) ...................... 3-22
To store non-standard size (Custom Size) ................................... 3-24
To specify paper type .................................................................. 3-27
3.7 Zoom Setting ................................................................................... 3-30
To copy in full size (×1.000) mode ............................................... 3-30
To copy in slightly reduced magnification mode (Minimal) .......... 3-31
To select a preset zoom ratio ...................................................... 3-33
To specify a desired zoom ratio
(Zoom with Constant X and Y Ratio) ............................................ 3-34
To specify lengthwise and widthwise zoom ratios separately
(Set Individual Zoom) ................................................................... 3-37
To select a stored magnification ratio .......................................... 3-40
To store a zoom ratio ................................................................... 3-41
To select a magnification ratio automatically (Auto Zoom) .......... 3-43
3.8 Simplex/Duplex Setting .................................................................. 3-46
To make double-sided copies using ADF .................................... 3-46
To make double-sided copies using original glass ...................... 3-50
To make single-sided copies from double-sided original ............ 3-54
3.9 Separate Scan Setting .................................................................... 3-58
To use Separate Scan mode ....................................................... 3-58
3.10 Setting Job During Warmup .......................................................... 3-62
To scan the original during warmup ............................................ 3-62
3.11 Next Job Reservation ..................................................................... 3-64
To reserve a copy job .................................................................. 3-64
3.12 To Stop/Resume/Delete a Job ...................................................... 3-67
To stop/resume the job in process .............................................. 3-67
To delete a suspended job .......................................................... 3-68
3.13 Copy Conditions Incompatible with Basic Settings .................... 3-70
4 Combine Originals/ Original Image Type
bizhub_500.book 7 ページ ２００６年１月２５日 水曜日 午後６時３９分

Introduction
x-8 bizhub 500/420
4.1 Lay Out Multiple Pages onto One Sheet (Combine Pages) ...........4-2
Function overview ...........................................................................4-2
To copy using Combine Pages .......................................................4-5
4.2 Specifying Original Settings (Original) .............................................4-8
4.2.1 Copying Mixed Size Original (Mixed Original) .................................4-8
Function overview ...........................................................................4-8
To copy using Mixed Original .........................................................4-8
4.2.2 Specifying Orientation of Original (Original Direction) ..................4-10
Function overview .........................................................................4-11
To specify Original Direction .........................................................4-12
4.2.3 Specifying Position of Binding Margin (Margin) ............................4-15
Function overview .........................................................................4-15
To specify Margin .........................................................................4-16
4.3 Making Copy Quality Closer to Original (Original Image Type) ...4-18
Function overview .........................................................................4-18
To specify Original Image Type ....................................................4-19
4.4 Copy Conditions Incompatible with Combine Originals/ Original
Image Type Settings ........................................................................4-20
5 Application Functions
5.1 Copying onto OHP Transparencies (OHP Interleave) ....................5-2
Function overview ...........................................................................5-2
To copy using OHP Interleave ........................................................5-3
5.2 Adding Covers (Cover Mode) ...........................................................5-7
Function overview ...........................................................................5-7
To copy using Cover Mode ............................................................5-8
5.3 Adding Insertions (Insert Sheet) .....................................................5-12
Function overview .........................................................................5-12
To copy using Insert Sheet ...........................................................5-14
5.4 Inserting Different Original Images into Printed Sets (Insert Image) 5-19
Function overview .........................................................................5-19
To copy using Insert Image ..........................................................5-20
5.5 Locating Title Pages on Front Side (Chapters) .............................5-24
Function overview .........................................................................5-24
To copy using Chapters ................................................................5-25
5.6 Dividing Spread Image into Right and Left Pages (Book Copy) .5-30
Function overview .........................................................................5-30
To copy using Book Copy ............................................................5-31
5.7 Repeating Original Image on One Sheet (Image Repeat) ............5-37
bizhub_500.book 8 ページ ２００６年１月２５日 水曜日 午後６時３９分

Introduction
bizhub 500/420 x-9
Function overview ........................................................................ 5-38
5.7.1 Setting Repeat Times Automatically ............................................ 5-39
To automatically set the repeat times .......................................... 5-39
5.7.2 Specifying Repeat Times (2/4/8 Repeat) ..................................... 5-44
To specify number of repeats ...................................................... 5-44
5.8 Dividing Spread Image into Right and Left Pages using ADF (Booklet
Pagination) ...................................................................................... 5-50
Function overview ........................................................................ 5-50
To copy using Booklet Pagination ............................................... 5-50
5.9 Making Multiple Page Signature Booklet (Booklet) ..................... 5-54
Function overview ........................................................................ 5-54
To copy using Booklet ................................................................. 5-54
5.10 Reversing Color and Gradation of Image (Neg-Pos. Reverse) ... 5-58
Function overview ........................................................................ 5-58
To copy using Neg-/Pos. Reverse ............................................... 5-58
5.11 Creating Margin of Copy Image (Page Margin) ........................... 5-60
Function overview ........................................................................ 5-60
5.11.1 Creating Binding Margin/ Selecting Binding Position .................. 5-61
To copy using Page Margin ......................................................... 5-61
5.11.2 Adjusting Image Position on Front/Back Sides (Edit Margin) ...... 5-64
To copy using Edit Margin ........................................................... 5-64
5.12 Erasing Specified Area of Copy (Erase) ........................................ 5-68
Function overview ........................................................................ 5-68
5.12.1 Erasing Black Marks along Borders (Erase) ................................. 5-69
To copy using Erase .................................................................... 5-69
5.12.2 Erasing Black Marks along Center Fold (Center Erase) ............... 5-72
To copy using Center Erase ......................................................... 5-72
5.12.3 Erasing Outside Area of Original (Non-Image Area Erase) ........... 5-74
To copy using Non-Image Area Erase ......................................... 5-74
5.13 Adjusting Position of Copy Image (Image Adjustment) .............. 5-77
Function overview ........................................................................ 5-77
5.13.1 Copying Image in the Center of Copy Paper (Centering) ............ 5-78
To copy using Centering .............................................................. 5-78
5.13.2 Disabling Rotation Function (No Rotate) ...................................... 5-80
To specify No Rotate ................................................................... 5-80
5.14 Printing Additional Information (Stamp) ....................................... 5-82
Function overview ........................................................................ 5-82
bizhub_500.book 9 ページ ２００６年１月２５日 水曜日 午後６時３９分

Introduction
x-10 bizhub 500/420
5.14.1 Printing Date/Time (Date/Time) .....................................................5-84
To copy using Date/Time ..............................................................5-84
5.14.2 Printing Page Number (Page #) ....................................................5-87
To copy using Page # ...................................................................5-87
5.14.3 Printing Distribution Number (Set Numbering) .............................5-92
To copy using Set Numbering ......................................................5-92
5.14.4 Printing Stamp onto Copies (Built-in Stamp) ................................5-94
To copy using Built-in Stamp .......................................................5-94
5.14.5 Printing Watermark onto Copies (Watermark) ..............................5-98
To copy using Watermark .............................................................5-98
5.15 Copy Conditions Incompatible with Application Functions ......5-101
6 Finishing/Folding
6.1 Output for Machine without Finisher ...............................................6-2
Function overview ...........................................................................6-3
To specify output mode ..................................................................6-4
6.2 Output for Machine with Finisher ....................................................6-6
Function overview ...........................................................................6-7
To specify finisher output mode .....................................................6-8
6.3 Stapling Output Copies (Staple) .....................................................6-10
Function overview .........................................................................6-10
To copy using Staple mode ..........................................................6-12
6.4 Punching File Holes in Copies (Punch) ..........................................6-15
Function overview .........................................................................6-15
To copy using Punch mode ..........................................................6-16
6.5 Folding Copies at the Center/Binding Copies at the Center: Half
Fold/ Fold & Staple ..........................................................................6-19
Function overview .........................................................................6-19
To copy using Half Fold or Fold & Staple .....................................6-20
6.6 Output for Machine with Separator ...............................................6-22
To specify Separator output mode ...............................................6-22
6.7 Copy Conditions Incompatible with Finishing/Folding ................6-26
7 Advanced Information
7.1 Checking Feature Selections by Proof Copying .............................7-2
To make a proof copy .....................................................................7-2
7.2 Checking Feature Selections before Copying (Mode Check) .......7-6
To use Mode Check function ..........................................................7-6
bizhub_500.book 10 ページ ２００６年１月２５日 水曜日 午後６時３９分

Introduction
bizhub 500/420 x-11
7.3 Interrupt Copying .............................................................................. 7-9
To copy using Interrupt mode ........................................................ 7-9
7.4 Storing and Recalling Job Settings (Mode Memory) ................... 7-11
To store copy program ................................................................ 7-11
To recall copy program ................................................................ 7-13
To change program name ............................................................ 7-17
To delete copy program ............................................................... 7-18
7.5 Displaying Screen for Operation Guide (Help) ............................. 7-20
7.5.1 Displaying Help Screen ................................................................ 7-21
To display Help Screen ................................................................ 7-21
7.6 Adjusting Control/Touch Panel Accessibility (Accessibility) ...... 7-24
7.6.1 Specifying Key Response Time in Enlarge Display Mode (Key Repeat
Start/Interval Time) ....................................................................... 7-24
To specify Key Repeat Start/Interval Time .................................. 7-25
7.6.2 Setting Timer for Enlarge Display Confirmation (Enlarge Display Timer
Setting) ......................................................................................... 7-27
To specify Enlarge Display Timer Setting .................................... 7-27
7.6.3 Specifying Error Message Display Time (Message Display Time) 7-29
To specify Message Display Time ............................................... 7-29
7.6.4 Enabling Key Tones (Sound Setting) ............................................ 7-31
To specify Sound Setting ............................................................. 7-31
7.6.5 Adjusting the Position of Touch Sensor (Touch Panel Adjustment) ...7-34
To specify Touch Panel Adjustment ............................................ 7-34
8 Job Management (Job List)
8.1 Overview of the Job List Screen ..................................................... 8-2
About Jobs ..................................................................................... 8-2
Types of the Job List Screen ......................................................... 8-2
Tasks available when the Job List Screen is displayed
after touching the [Print] tab .......................................................... 8-4
Description of the Job List Screen displayed
after touching the [Print] tab .......................................................... 8-4
8.2 Managing the Job List Screen ......................................................... 8-7
To display Current Jobs ................................................................. 8-7
To display Job History ................................................................... 8-9
8.2.1 Check the Details of Jobs in Current Jobs and Job History ........ 8-11
8.2.2 Check the Settings of Jobs Active or Held in Current Jobs ........ 8-14
8.2.3 Delete Active and Held Jobs in Current Jobs .............................. 8-16
8.2.4 Increase Priority for Printing an Active Job in Current Jobs ........ 8-17
bizhub_500.book 11 ページ ２００６年１月２５日 水曜日 午後６時３９分

Introduction
x-12 bizhub 500/420
8.2.5 Prints a Single Held Job in Current Jobs List and Checks Its Output
Result ............................................................................................8-19
8.2.6 Change and Print the Settings of Held Jobs in Current Jobs .......8-21
9 Paper and Original Information
9.1 Copy Paper .........................................................................................9-2
Paper Tray and Equipment .............................................................9-2
Paper Weight ..................................................................................9-3
Paper Tray/ Output Tray Capacity ..................................................9-4
Paper Capacity in Finisher FS-510 Output Trays ...........................9-4
Paper Size .......................................................................................9-6
Auto Tray Switch Function ..............................................................9-8
Special Paper ..................................................................................9-9
Precautions for Paper ...................................................................9-11
Paper Storage ...............................................................................9-11
9.2 Originals ...........................................................................................9-12
Unsuitable ADF Originals ..............................................................9-12
Positioning Original into the ADF ..................................................9-13
Positioning Original on the Original Glass ....................................9-14
10 Supplies & Handling
10.1 When the Message “Replenish Paper” Is Displayed ....................10-2
10.2 Replacing Toner Cartridge .............................................................10-3
Display in Enlarge Display Mode ..................................................10-4
To replace the toner cartridge ......................................................10-5
10.3 Adding Staples .................................................................................10-9
Display in Enlarge Display Mode ................................................10-10
To replace the staple cartridge for Finisher FS-511 ...................10-10
To replace the staple cartridge for Finisher FS-510 ...................10-14
To replace the staple cartridge for Saddle stitcher SD-502 .......10-18
10.4 Emptying Dust Boxes ....................................................................10-22
To empty the dust box of FS-511 ...............................................10-22
To empty the dust box of PU-501 ..............................................10-24
11 Troubleshooting
11.1 When the Message “Malfunction Detected” Appears (Call Technical
Representative) ................................................................................11-2
Display in Enlarge Display Mode ..................................................11-2
To call the technical representative ..............................................11-3
11.2 When the Message “Misfeed Detected” Is Displayed .................11-5
To clear a paper misfeed ..............................................................11-6
bizhub_500.book 12 ページ ２００６年１月２５日 水曜日 午後６時３９分

Introduction
bizhub 500/420 x-13
11.3 When the Message “... Not Enough Remaining Memory” Is Displayed ..11-8
Memory Becomes Full While Scanning ....................................... 11-8
Memory Becomes Full While Queuing a Job ............................... 11-9
11.4 Simple Troubleshooting ............................................................... 11-10
11.5 Main Messages and Their Remedies .......................................... 11-13
12 Machine Maintenance
12.1 Cleaning ........................................................................................... 12-2
Cleaning the left partition glass .................................................... 12-2
Cleaning the original glass ........................................................... 12-2
Cleaning the document pad ......................................................... 12-3
Cleaning the paper take-up roller ................................................ 12-3
Cleaning the writing unit glass and the electrode wires .............. 12-4
Cleaning the main unit ................................................................. 12-4
Cleaning the control panel ........................................................... 12-5
12.2 Viewing Counters (Meter Count) ................................................... 12-6
To check and print the counter list .............................................. 12-6
12.3 When the Message “Preventive Maintenance Time” Is Displayed ...12-8
13 Specifications
13.1 Main Unit Specifications ................................................................ 13-2
Main Unit ...................................................................................... 13-2
Reverse Automatic Document Feeder DF-607 ............................ 13-4
13.2 Option Specifications ..................................................................... 13-5
Paper Feed Cabinet PC-202 ........................................................ 13-5
Paper Feed Cabinet PC-402 ........................................................ 13-5
Large Capacity Unit LU-201 ........................................................ 13-6
Desk DK-501 ................................................................................ 13-6
Finisher FS-510 ............................................................................ 13-7
Output Tray Kit OT-601 ................................................................ 13-8
Punch Unit PU-501 ...................................................................... 13-8
Saddle Stitcher SD-502 ............................................................... 13-9
Mailbin Kit MT-501 ....................................................................... 13-9
Finisher FS-511 .......................................................................... 13-10
Output Tray OT-501 ................................................................... 13-11
Job Separator JS-502 ................................................................ 13-11
Other Options ............................................................................. 13-12
14 Utility <User Setting>
14.1 User Setting Outlines ..................................................................... 14-2
How to use [Close], [Exit], and layer keys .................................... 14-3
bizhub_500.book 13 ページ ２００６年１月２５日 水曜日 午後６時３９分

Introduction
x-14 bizhub 500/420
Function list of User Setting .........................................................14-3
14.2 1 System Setting ..............................................................................14-6
14.2.1 1 Language Selection ...................................................................14-6
To specify Language Selection .....................................................14-6
14.2.2 2 Measurement Unit Setting .........................................................14-8
To specify Measurement Unit Setting ..........................................14-8
14.2.3 3 Paper Tray Setting > 1 Paper Type ..........................................14-10
To specify Paper Type ................................................................14-10
14.2.4 3 Paper Tray Setting > 2 Auto Tray Select Setting .....................14-12
To specify Auto Tray Select Setting ............................................14-12
14.2.5 3 Paper Tray Setting > 3 Auto Tray Switch ON/OFF ..................14-14
To specify Auto Tray Switch ON/OFF .........................................14-14
14.2.6 3 Paper Tray Setting > 4 No Matching Paper in Tray Setting .....14-16
To specify No Matching Paper in Tray Setting ...........................14-16
14.2.7 3 Paper Tray Setting > 5 Print Lists ............................................14-18
To specify Print Lists ..................................................................14-18
14.2.8 4 Reset Setting > 1 System Auto Reset .....................................14-20
To specify System Auto Reset ....................................................14-20
14.2.9 4 Reset Setting > 2 Auto Reset ..................................................14-22
To specify Auto Reset .................................................................14-22
14.2.10 4 Reset Setting > 3 Job Reset ....................................................14-24
To specify Job Reset ..................................................................14-24
14.3 2 Display Setting ............................................................................14-27
14.3.1 1 Sub Screen Display ON/OFF ...................................................14-27
To specify Sub Screen Display ON/OFF .....................................14-27
14.3.2 2 Scan Basic Screen Default Setting ..........................................14-29
14.3.3 4 Copy Screen ............................................................................14-29
To specify Copy Screen ..............................................................14-29
14.4 3 Initial Setting ...............................................................................14-31
To specify the initial setting ........................................................14-31
14.5 4 Copier Setting .............................................................................14-33
14.5.1 Auto Booklet ON When Fold & Staple ........................................14-33
To specify Auto Booklet ON When Fold & Staple ......................14-33
14.5.2 Auto Zoom for Combine/Booklet ................................................14-35
To specify Auto Zoom for Combine/Booklet ..............................14-35
14.5.3 Sort/Group Auto Change ............................................................14-37
bizhub_500.book 14 ページ ２００６年１月２５日 水曜日 午後６時３９分

Introduction
bizhub 500/420 x-15
To specify Sort/Group Auto Change .......................................... 14-37
15 Utility <Administrator Setting>
15.1 Administrator Setting Outlines ...................................................... 15-2
How to access the Administrator Setting Screen ........................ 15-2
How to use [Close], [Exit], and layer keys .................................... 15-3
15.1.1 Chart of Setting Items on Utility Screens ..................................... 15-4
Administrator Security Level ........................................................ 15-4
Marks and indication in the chart ................................................. 15-4
15.1.2 Function List of Administrator Setting ....................................... 15-15
15.2 1 System Setting ........................................................................... 15-21
15.2.1 1 Power Save Setting ................................................................. 15-21
To specify Power Save Setting .................................................. 15-21
15.2.2 2 Output Setting>2 Output Tray Setting .................................... 15-25
To specify Output Tray Setting .................................................. 15-25
15.2.3 3 Date/Time Setting ................................................................... 15-27
To specify Date/Time Setting ..................................................... 15-27
15.2.4 4 Daylight Saving Time Setting .................................................. 15-29
To specify Daylight Saving Time Setting ................................... 15-29
15.2.5 Weekly Timer Setting Outlines ................................................... 15-31
15.2.6 5 Weekly Timer Setting>1 Weekly Timer ON/OFF Setting ........ 15-32
To specify Weekly Timer ON/OFF Setting ................................. 15-32
15.2.7 5 Weekly Timer Setting>2 Time Setting ..................................... 15-33
To specify Time Setting ............................................................. 15-33
15.2.8 5 Weekly Timer Setting>3 Date Setting ..................................... 15-36
To specify Date Setting .............................................................. 15-36
15.2.9 5 Weekly Timer Setting>4 Select Time for Power Save ............ 15-38
To specify Select Time for Power Save ..................................... 15-38
15.2.10 5 Weekly Timer Setting>5 Password for Non-Business Hours . 15-40
To specify Password for Non-Business Hours .......................... 15-40
15.2.11 6 Restrict User Access>1 Restrict Access to Saved Program Jobs 15-42
To specify Restrict Access to Saved Program Jobs .................. 15-42
15.2.12 6 Restrict User Access>2 Delete Saved Program Jobs ............ 15-44
To specify Delete Saved Program Jobs ..................................... 15-44
15.2.13 6 Restrict User Access>3 Restrict Access to Job Settings ....... 15-45
To specify Restrict Access to Job Settings ............................... 15-45
15.2.14 7 Expert Adjustment>1 Original Image Density ......................... 15-48
bizhub_500.book 15 ページ ２００６年１月２５日 水曜日 午後６時３９分

Introduction
x-16 bizhub 500/420
To specify Original Image Density ..............................................15-48
15.2.15 7 Expert Adjustment>2 Erase Adjustment ..................................15-50
To specify Erase Adjustment ......................................................15-50
15.2.16 7 Expert Adjustment>3 Finisher Adjustment ..............................15-53
To specify Finisher Adjustment ...................................................15-53
15.2.17 8 List/Counter>1 Management List ............................................15-59
To specify Management List .......................................................15-59
15.2.18 8 List/Counter>2 Paper Size/Type Counter ................................15-61
To specify Paper Size/Type Counter ..........................................15-61
15.2.19 10 Standard Size Setting ............................................................15-63
To specify Standard Size Setting ................................................15-63
15.3 2 Administrator/Machine Setting .................................................15-66
15.3.1 1 Administrator Registration .......................................................15-66
To specify Administrator Registration .........................................15-66
15.3.2 2 Input Machine Address ............................................................15-69
To specify Input Machine Address .............................................15-69
15.4 4 User Authentication/Account Track .........................................15-71
User Authentication and Account Track .....................................15-71
15.4.1 1 Authentication Method ............................................................15-73
To specify Authentication Method ..............................................15-73
15.4.2 2 User Authentication Setting>1 Administrative Setting .............15-79
To specify Administrative Setting ...............................................15-79
15.4.3 2 User Authentication Setting>2 User Registration ....................15-82
To specify User Registration .......................................................15-82
15.4.4 2 User Authentication Setting>3 User Counter ..........................15-86
To specify User Counter .............................................................15-86
15.4.5 3 Account Track Setting>1 Account Track Registration ............15-89
To specifiy Account Track Registration ......................................15-89
15.4.6 3 Account Track Setting>2 Account Track Counter ...................15-92
To specify Account Track Counter .............................................15-92
15.4.7 4 Print without Authentication .....................................................15-95
To specify Print without Authentication ......................................15-95
15.4.8 5 Counter List .............................................................................15-97
To specify Counter List ...............................................................15-97
15.5 6 Copier Setting .............................................................................15-99
15.5.1 Auto Zoom (Platen) .....................................................................15-99
bizhub_500.book 16 ページ ２００６年１月２５日 水曜日 午後６時３９分

Introduction
bizhub 500/420 x-17
To specify Auto Zoom (Platen) ................................................... 15-99
15.5.2 Auto Zoom (ADF) ...................................................................... 15-100
To specify Auto Zoom (ADF) .................................................... 15-100
15.5.3 Select Tray when APS OFF ...................................................... 15-101
To specify Select Tray when APS OFF .................................... 15-101
15.5.4 Select Tray for Insert Sheet ...................................................... 15-102
To specify Select Tray for Insert Sheet .................................... 15-102
15.5.5 Print Jobs During Copy Operation ........................................... 15-104
To specify Print Jobs During Copy Operation ......................... 15-104
15.6 9 Security Setting ........................................................................ 15-106
15.6.1 1 Administrator Password ........................................................ 15-106
To specify Administrator Password ......................................... 15-106
15.6.2 3 Administrator Security Level ................................................. 15-108
To specify Administrator Security Level .................................. 15-108
15.6.3 4 Security Details ..................................................................... 15-110
To specify Security Details ....................................................... 15-110
15.6.4 6 Management Function Setting>3 Network Function Setting 15-112
To specify Network Function Setting ....................................... 15-112
16 Appendix
16.1 Entering Text ................................................................................... 16-2
To type text .................................................................................. 16-4
List of Available Characters ......................................................... 16-4
17 Index
17.1 Index ................................................................................................ 17-2
bizhub_500.book 17 ページ ２００６年１月２５日 水曜日 午後６時３９分

Introduction
x-18 bizhub 500/420
Available Features
Automatically selecting the paper
The most appropriate paper size can automatically be selected based on the
size of the loaded original and the specified zoom ratio.
For details, refer to “To select paper size automatically (Auto Paper Select)”
on page 3-16.
Specifying separate horizontal and vertical zoom ratios
By specifying separate horizontal and vertical zoom ratios, copies of the orig-
inal can be resized as desired.
For details, refer to “To specify lengthwise and widthwise zoom ratios sepa-
rately (Set Individual Zoom)” on page 3-37.
Adjusting copies to the size of the paper
The most appropriate zoom ratio can automatically be selected based on the
size of the loaded original and the specified paper size.
For details, refer to “To select a magnification ratio automatically (Auto
Zoom)” on page 3-43.
Scanning the original in separate batches
A document with a large number of pages can be divided and scanned in
separate batches. Double-sided copies can be produced by using the origi-
nal glass or the original pages can be alternately loaded onto the original
glass or into the automatic document feeder, and then all pages can be print-
ed together as a single job.
For details, refer to “Separate Scan Setting” on page 3-58.
bizhub_500.book 18 ページ ２００６年１月２５日 水曜日 午後６時３９分

Introduction
bizhub 500/420 x-19
Copying multiple original pages onto a single page
Multiple pages of the original can be printed together on a single page.
For details, refer to “Lay Out Multiple Pages onto One Sheet (Combine Pag-
es)” on page 4-2.
Copying an original containing various page sizes
An original with various page sizes can be scanned and copied together.
For details, refer to “Copying Mixed Size Original (Mixed Original)” on
page 4-8.
Adjusting copies according to the image quality of the original
The copies can be adjusted according to the image quality of the original.
For details, refer to “Density Setting” on page 3-14 or “Making Copy Quality
Closer to Original (Original Image Type)” on page 4-18.
Inserting paper between copies of overhead projector transparencies
After each overhead projector transparency copy is printed, a page can be
added to the stack as an interleaf.
For details, refer to “Copying onto OHP Transparencies (OHP Interleave)” on
page 5-2.
DEF
ABC
bizhub_500.book 19 ページ ２００６年１月２５日 水曜日 午後６時３９分