Konica Minolta MS6000 MKII User manual

0820-7732-01
0820-7732-01 CMYK
2004.6
konicaminolta.com
30mm
MS6000 MKII
User's Guide

Energy Star®
As an ENERGY STAR®Partner, we have determined that this machine meets the ENERGY
STAR®Guidelines for energy efficiency.
What is an ENERGY STAR®Product?
An ENERGY STAR®product has a special feature that allows it to automatically switch to a
“low-power mode” after a period of inactivity. An ENERGY STAR®product uses energy
more efficiently, saves you money on utility bills and helps protect the environment.
Only the setting of “Auto Power Save (15 min.)” complies with the Energy Star standard.
For USA and Canada only:
The Auto Power Save function becomes available for setting only if the Energy Star Kit is
mounted on the Scanner.

P-ii
SAFETY INFORMATION
This section contains detailed instructions on the operation and maintenance of this
machine. To achieve optimum utility of this device, all operators should carefully
read and follow the instructions in this manual. Please keep this manual in a handy
place near the machine.
Make sure you observe all of the precautions listed in this manual.
*Ver07
Please note that some parts of the contents of this section may not correspond with the purchased product.
Warning and Precaution Symbols
Meaning of Symbols
Ignoring this warning could cause serious injury or
even death.
Ignoring this caution could cause injury or damage
to property.
A triangle indicates a danger against which you should take precaution.
This symbol warns against cause burns.
A diagonal line indicates a prohibited course of action.
This symbol warns against dismantling the device.
A black circle indicates an imperative course of action.
This symbol indicates you must unplug the device.

SAFETY INFORMATION
P-iii
• Do not modify this product, as a fire, electrical shock, or break-
down could result. If the product employs a laser, the laser beam
source could cause blindness.
• Do not attempt to remove the covers and panels which have been
fixed to the product. Some products have a high-voltage part or a
laser beam source inside that could cause an electrical shock or
blindness.
• Only use the power cord supplied in the package. If a power cord
is not supplied, only use the power cord and plug that is specified
in POWER CORD INSTRUCTION. Failure to use this cord could
result in a fire or electrical shock.
• Use the power cord supplied in the package only for this machine
and NEVER use it for any other product. Failure to observe this
precaution could result in a fire or electrical shock.
• Use only the specified power source voltage. Failure to do that
could result in a fire or electrical shock.
• Do not use a multiple outlet adapter to connect any other appli-
ances or machines. Use of a power outlet for more than the
marked current value could result in a fire or electrical shock.
Do not unplug and plug in the power cord with a wet hand, as an
electrical shock could result.
Plug the power cord all the way into the power outlet. Failure to do
this could result in a fire or electrical shock.
• Do not scratch, abrade, place a heavy object on, heat, twist, bend,
pull on, or damage the power cord. Use of a damaged power cord
(exposed core wire, broken wire, etc.) could result in a fire or
breakdown.
Should any of these conditions be found, immediately turn OFF
the power switch, unplug the power cord from the power outlet,
and then call your authorized service representative.
• Do not use an extension cord, in principle. Use of an extension
cord could cause a fire or electrical shock. Contact your autho-
rized service representative if an extension cord is required.

SAFETY INFORMATION
P-iv
Do not place a flower vase or other container that contains water, or
metal clips or other small metallic objects on this product. Spilled
water or metallic objects dropped inside the product could result in a
fire, electrical shock, or breakdown.
Should a piece of metal, water, or any other similar foreign matter
get inside the product, immediately turn OFF the power switch,
unplug the power cord from the power outlet, and then call your
authorized service representative.
• Do not keep using this product, if this product becomes inordi-
nately hot or emits smoke, or unusual odor or noise. Immediately
turn OFF the power switch, unplug the power cord from the power
outlet, and then call your authorized service representative. If you
keep on using it as is, a fire or electrical shock could result.
• Do not keep using this product, if this product has been dropped
or its cover damaged. Immediately turn OFF the power switch,
unplug the power cord from the power outlet, and then call your
authorized service representative. If you keep on using it as is, a
fire or electrical shock could result.
Do not throw the toner cartridge or toner into an open flame. The hot
toner may scatter and cause burns or other damage.
Connect the power cord to an electrical outlet that is equipped with a
grounding terminal.

SAFETY INFORMATION
P-v
• Do not use flammable sprays, liquids, or gases near this product,
as a fire could result.
• Do not leave a toner unit or drum unit in a place within easy reach
of children. Licking or ingesting any of these things could injure
your health.
• Do not let any object plug the ventilation holes of this product.
Heat could accumulate inside the product, resulting in a fire or
malfunction.
• Do not install this product at a site that is exposed to direct sun-
light, or near an air conditioner or heating apparatus. The resultant
temperature changes inside the product could cause a malfunc-
tion, fire, or electrical shock.
• Do not place the product in a dusty place, or a site exposed to
soot or steam, near a kitchen table, bath, or a humidifier. A fire,
electrical shock, or breakdown could result.
• Do not place this product on an unstable or tilted bench, or in a
location subject to a lot of vibration and shock. It could drop or fall,
causing personal injury or mechanical breakdown.
• After installing this product, mount it on a secure base. If the unit
moves or falls, it may cause personal injury.
• Do not store toner units and PC drum units near a floppy disk or
watch that are susceptible to magnetism. They could cause these
products to malfunction.
The inside of this product has areas subject to high temperature,
which may cause burns. When checking the inside of the unit for
malfunctions such as a paper misfeed, do not touch the locations
(around the fusing unit, etc.) which are indicated by a “CAUTION
HOT” caution label.
Do not place any objects around the power plug as the power plug
may be difficult to pull out when an emergency occurs.
The socket-outlet shall be installed near the machine and shall be
easily accessible as the power plug may be difficult to pull out when
an emergency occurs.

SAFETY INFORMATION
P-vi
Precautions for Routine
• Always use this product in a well ventilated location. Operating the
product in a poorly ventilated room for an extended period of time
could injure your health. Ventilate the room at regular intervals.
• Whenever moving this product, be sure to disconnect the power
cord and other cables. Failure to do this could damage the cord or
cable, resulting in a fire, electrical shock, or breakdown.
• When moving this product, always hold it by the locations speci-
fied in the operator’s manual or other documents. If the unit falls it
may cause severe personal injury. The product may also be dam-
aged or malfunction.
• Remove the power plug from the outlet more than one time a year
and clean the area between the plug terminals. Dust that accumu-
lates between the plug terminals may cause a fire.
• When unplugging the power cord, be sure to hold onto the plug.
Pulling on the power cord could damage the cord, resulting in a
fire or electrical shock.
• Do not store toner units, PC drum units, and other supplies and
consumables in a place subject to direct sunlight and high temper-
ature and humidity, as poor image quality and malfunction could
result.
• Do not attempt to replace the toner unit and PC drum unit in a
place exposed to direct sunlight. If the PC drum is exposed to
intense light, poor image quality could result.
• Do not unpack a toner unit or PC drum unit until the very time of
use. Do not leave an unpacked unit standing. Install it immediately
or poor image quality could result.
• Do not keep toner units and PC drum units in an upright position
or upside down, as poor image quality could result.
• Do not throw or drop a toner unit or PC drum unit as poor image
quality could result.
• Do not use this product in an area where ammonia or other gases
or chemicals are present. Failure to do so may shorten the service
life of the product, cause damage or decrease performance.
• Do not use this product in an environment with a temperature out-
side the range specified in the operator’s manual, as a breakdown
or malfunction could result.
• Do not attempt to feed stapled paper, carbon paper or aluminum
foil through this product, as a malfunction or fire could result.

SAFETY INFORMATION
P-vii
Do not touch or scratch the surface of the toner unit developing roller
and the PC drum, as poor image quality could result.
Use the supplies and consumables recommended by the dealer. Use
of any supply or consumable not recommended could result in poor
image quality and breakdown.

i
Welcome
This User’s Guide explains how to operate the unit and replenish its supplies. It also gives
some troubleshooting tips as well as general precautions to be observed when operating the
unit.
To ensure the best performance and effective use of your unit, read this User’s Guide carefully
until you familiarize yourself thoroughly with the unit's operation and features.
Please keep this User’s Guide and use it as a quick and handy reference tool for immediately
clarifying any questions that may arise.
Please follow the instructions given in this User’s Guide when handling the system and do not
touch any part of the system the User’s Guide does not cover.
NEVER attempt to disassemble or remodel the system.
The contents of this User’s Guide are subject to change without notice.
No part of this User’s Guide may be quoted, reproduced, or translated into any other language.