Kontron MPC-pONE User manual

If it's embedded it's Kontron.
MPC-pONE
Document Revision 100

www.kontron.com
» Table of Contents «
1ser Information............................................................................ 3
1.1 About This Document ...............................................................................................................3
1.2 Copyright Notice .....................................................................................................................3
1.3 Trademarks............................................................................................................................3
1.4 Standards..............................................................................................................................3
1.5 Warranty ...............................................................................................................................3
1.6 Technical Support ...................................................................................................................4
1.7 Environmental Protection Statement...........................................................................................4
1.8 RoHS Commitment ..................................................................................................................4
1.8.1 RoHS Compatible Product Design...............................................................................................5
1.8.2 RoHS Compliant Production Process ...........................................................................................5
1.8.3 WEEE Application ...................................................................................................................5
1.9 The Swiss Association for Quality and Management Systems..............................................................6
2Specifications................................................................................ 7
2.1 Technical Data........................................................................................................................7
2.2 MPC-pONE Ordering Information.................................................................................................7
2.3 Assembly Options....................................................................................................................7
2.4 Electrical Specifications............................................................................................................8
2.4.1 Supply Voltage ......................................................................................................................8
2.4.2 Supply Current ......................................................................................................................8
2.5 Mechanical Specifications .........................................................................................................8
2.6 Environmental Specifications.....................................................................................................8
2.6.1 Temperature .........................................................................................................................8
2.6.2 Humidity..............................................................................................................................8
2.7 Real-Time Clock Battery CR2032 .................................................................................................9
2.8 Electromagnetic Compatibility (E ).............................................................................................9
3MPC-pONE Connectors & Operating Elements .......................................10
3.1 Front Panel .......................................................................................................................... 10

www.kontron.com
3.2 Back Panel........................................................................................................................... 11
4Functions ....................................................................................12
4.1 Block Diagram ......................................................................................................................12
4.2 Power LEDs (ON / 5VSB).......................................................................................................... 13
4.3 Indicator LEDs L2, L3 & L4....................................................................................................... 13
4.4 WOL (Wake-on-LAN) .............................................................................................................. 13
5BIOS Setup...................................................................................14
5.1 Enter BIOS Setup................................................................................................................... 14
6Getting Started .............................................................................15
7Appendix A: Pin Assignments of the Connectors ...................................16
7.1 DVI .................................................................................................................................... 16
7.2 Double SB Type A ................................................................................................................ 16
7.3 LAN (RJ-45)......................................................................................................................... 17
7.4 Power (2.1mm)..................................................................................................................... 17
8Appendix B: Mechanical Dimensions..................................................18
9Appendix C: Document Revision History..............................................19
10 Index..........................................................................................20

www.kontron.com
3
MPC-pONE / ser Information
1User Information
1.1 About This Document
This document provides information about products from Kontron AG and/or its subsidiaries. No warranty of
suitability, purpose, or fitness is implied. While every attempt has been made to ensure that the information in this
document is accurate, the information contained within is supplied "as-is" and is subject to change without notice.
1.2 Cop right Notice
Copyright© 2003-2011 Kontron AG
All rights reserved. No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval
system, or translated into any language or computer language, in any form or by any means (electronic, mechanical,
photocopying, recording, or otherwise), without the express written permission of Kontron AG.
The software described herein, together with this document, are furnished under a license agreement and may be
used or copied only in accordance with the terms of that agreement.
1.3 Trademarks
MICROSPACE®, smartModule®, smartCore®Express and DIGITAL-LOGIC® are trademarks or registered trademarks of
Kontron Compact Computers AG. Kontron is a trademark or registered trademark of Kontron AG.
The following lists the trademarks of components used in this product.
»IBM, XT, AT, PS/2 and Personal System/2 are trademarks of International Business Machines Corp.
»Microsoft is a registered trademark of Microsoft Corp.
»Intel is a registered trademark of Intel Corp.
All other products and trademarks mentioned in this manual are trademarks of their respective owners. For the
circuits, descriptions and tables indicated, Kontron assumes no responsibility as far as patents or other rights of third
parties are concerned.
1.4 Standards
Kontron AG is certified to ISO 9001:2000 standards.
1.5 Warrant
This Kontron AG product is warranted against defects in material and workmanship for the warranty period from the
date of shipment. During the warranty period, Kontron AG will, at its discretion, decide to repair or replace defective
products.
Within the warranty period, the repair of products is free of charge as long as warranty conditions are observed.

www.kontron.com
4
MPC-pONE / ser Information
The warranty does not apply to defects resulting from improper or inadequate maintenance or handling by the buyer,
unauthorized modification or misuse, operation outside of the product's environmental specifications or improper
installation or maintenance.
Kontron AG will not be responsible for any defects or damages to other products not supplied by Kontron AG that are
caused by a faulty Kontron AG product.
Empty batteries (external and onboard), as well as all other battery failures, are not covered by this manufacturer's
limited warranty.
1.6 Technical Support
Technicians and engineers from Kontron AG and/or its subsidiaries are available for technical support. We are
committed to making our products easy to use and will help you use our products in your systems.
For technical support, please consult our technical support department:
Web: http://support.kcc-ag.ch
Tel.: [phone]
Fax: [phone]
For the latest product documentation, utilities, drivers, additional tools and software please consult our website:
Web: http://kontron.com
1.7 Environmental Protection Statement
This product has been manufactured to satisfy environmental protection requirements wherever possible. Many of the
components used (structural parts, printed circuit boards, connectors, batteries, etc.) are capable of being recycled.
Final disposal of this product after its service life must be accomplished in accordance with applicable country, state,
or local laws or regulations. All components within this product fulfill the requirements of the RoHS (Restriction of
Hazardous Substances Directive). The product is soldered with a lead free process.
1.8 RoHS Commitment
Kontron Compact Computers AG (Switzerland) is committed to developing and producing environmentally friendly
products according to the Restriction of Hazardous Substances (RoHS) Directive (2002/95/EC) and the Waste
Electrical and Electronic Equipment (WEEE) Directive (2002/96/EC) established by the European nion. The RoHS
directive was adopted in February 2003 by the European nion and came into effect on July 1, 2006. It is not a law but
a directive, which restricts the use of six hazardous materials in the manufacturing of various types of electronic and
electrical equipment. It is closely linked with the Waste Electrical and Electronic Equipment Directive (WEEE)
2002/96/EC, which has set targets for the collection, recycling and recovery of electrical goods and is part of a
legislative initiative to solve the problem of huge amounts of toxic e-waste.
Each European nion member state is adopting its own enforcement and implementation policies using the Directive
as a guide. Therefore, there could be as many different versions of the law as there are Member States in the E .
Additionally, non-E countries like China, Japan, or states in the .S. such as California may have their own
regulations for green products, which are similar, but not identical, to the RoHS directive.

www.kontron.com
5
MPC-pONE / ser Information
RoHS is often referred to as the "lead-free" directive but it restricts the use of the following substances:
»Lead
»Mercury
»Cadmium
»Chromium VI
»PBB and PBDE
The maximum allowable concentration of any of the above mentioned substances is 0.1% (except for Cadmium, which
is limited to 0.01%) by weight of homogeneous material. This means that the limits do not apply to the weight of the
finished product, or even to a component but to any single substance that could (theoretically) be separated
mechanically.
1.8.1 RoHS Compatible Product Design
All standard products from Kontron Compact Computers (KCC) comply with RoHS legislation.
Since July 1, 2006, there has been a strict adherence to the use of RoHS compliant electronic and mechanical
components during the design-in phase of all KCC AG standard products.
1.8.2 RoHS Compliant Production Process
KCC selects external suppliers that are capable of producing RoHS compliant devices verified by:
»A confirmation from the supplier indicating that their production processes and resulting devices are RoHS
compliant.
»If there is any doubt of the RoHS compliancy, the concentration of the previously mentioned substances in a
produced device will be measured. These measurements are carried out by an accredited laboratory.
1.8.3 WEEE Application
The WEEE directive is closely related to the RoHS directive and applies to the following devices:
»Large and small household appliances
»IT equipment
»Telecommunications equipment (although infrastructure equipment is exempt in some countries)
»Consumer equipment
»Lighting equipment – including light bulbs
»Electronic and electrical tools
»Toys, leisure and sports equipment
»Automatic dispensers
It does not apply to fixed industrial plants and tools. Compliance is the responsibility of the company that brings the
product to market, as defined in the directive. Components and sub-assemblies are not subject to product
compliance. In other words, since Kontron Compact Computers AG does not deliver ready-made products to end users
the WEEE directive is not applicable for KCC. sers are nevertheless encouraged to properly recycle all electronic
products that have reached the end of their life cycle.

www.kontron.com
6
MPC-pONE / ser Information
1.9 The Swiss Association for Qualit and Management S stems
The Swiss Association for Quality and Management Systems (SQS) provides certification and assessment services for
all types of industries and services. SQS certificates are accepted worldwide thanks to accreditation by the Swiss
Accreditation Service (SAS), active membership in the International Certification Network, IQNet, and co-operation
contracts/agreements with accredited partners.
www.sqs.ch
The SQS Certificate ISO 9001:2000 has been issued to Kontron Compact Computers AG in the field of development,
manufacturing and sales of embedded computer boards, embedded computer modules and computer systems. The
certification is valid for three years at which time an audit is performed for recertification.

www.kontron.com
7
MPC-pONE / Specifications
2Specifications
2.1 Technical Data
Function Description
CP / Performance Intel® Atom™ Z530 / 1.6GHz or Z510 / 1.1GHz
Chipset Intel® S15W
Memory One DDR2-400 / DDR2-533, unbuffered DDR-SDRAM (SODIMM form factor) up to 2 GB
Hard Disk / SSD 1x SATA 2.5" Hard Disk or SSD
Video Controller Intel® GMA 500
3D-Support DirectX 9
1st Video Interface DVI-D
Display Resolution Maximum 1280x800 (WXGA)
Keyboard / Mouse SB
SB Ports 2x front panel ( SB 2.0) / 2x back panel ( SB 2.0)
Internal SATA Interface SATA II
LAN PORT A 1Gbit/s / WakeOnLan function
Audio Controller High Definition Audio
Audio SPK Stereo Line-Out
Audio MIC Stereo Line-In / Mic
2.2 MPC-pONE Ordering Information
Part / Option Part No. Description
MPC-pONE Z510 812200 MPC-pONE system with Intel® Atom™ Z510 / 1.1GHz, 1GB RAM
MPC-pONE Z530 812201 MPC-pONE system with Intel® Atom™ Z530 / 1.6GHz, 1GB RAM
2.3 Assembl Options
The product has different assembly options. Ask the factory for the detailed information about the currently available
options and combination of options.
Part / Option Part No. Description
RAM 2GB DDR2 SODIMM 807364 pgrade to 2GB DDR2 RAM
Hard Disk 320GB 872100 Hard disk 320GB
Solid State Drive 2.5" 40GB 872105 SSD for extended temperature and environment conditions
Solid State Drive 2.5" 80GB 872106 SSD for extended temperature and environment conditions
Micro SD Flash 4GB 807480 Internal Micro SD card
Power supply adapter 812210 Power supply; 230V AC to +5V DC
Power cord Euro 693061 2 wire for AC-Supply
Power cord SA/JP 693062 2 wire for AC-Supply
Power cord GB 693063 2 wire for AC-Supply
DIN Rail Kit 872200 Kit for DIN Rail (EN50022) mounting

www.kontron.com
8
MPC-pONE / Specifications
2.4 Electrical Specifications
Note: The computer system does not have an internal fuse. To protect the supply input from overcurrent, an
external fuse or a current-limited power supply should be used.
The product is suitable for use in IT-power systems.
To completely power off the system, all power must be disconnected from the device by either removing the cords
from the device or from the power sources. All connectors must always be easily accessible.
Be sure to disconnect the power supply before opening the system.
2.4.1 Suppl Voltage
Input DC In Min. /Max. Supply voltage ripple
DC Main 5V ±5% Max. 100mV peak to peak (0-20MHz)
See Appendix A for the pin assignments of the DC Main Connector.
2.4.2 Suppl Current
State MPC-pONE Z510 P MPC-pONE Z530 P
ON, WinXP, idle 0.9mA 4.5W 1.4A 7.0W
ON, WinXP SP3, 100% CP load 1.5A 7.5W 2.1A 10.5W
Standby S3 80mA 0.4W 80mA 0.4W
2.5 Mechanical Specifications
Property Description
Size (W x L x H in mm) 130 x 99 x 56/105 (See Appendix B)
Weight 0.6 kg
Housing Aluminum
Color Silver
2.6 Environmental Specifications
2.6.1 Temperature
»Operating: 0°C to +45°C
2.6.2 Humidit
»Operating: 10% to 90% (non-condensing)

www.kontron.com
9
MPC-pONE / Specifications
2.7 Real-Time Clock Batter CR2032
»Nominal voltage: 3.0V
»Capacity: 230mAh
Lithium Batter Precautions:
CA TION!
Danger of explosion if the battery is incorrectly
replaced. Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used
batteries according to the manufacturer's instructions.
VORSICHT!
Explosionsgefahr bei unsachgemässem Austausch der
Batterie. Ersatz nur durch denselben oder einem vom
Hersteller empfohlenen gleichwertigen Typ. Entsorgung
gebrauchter Batterien nach Angaben des Herstellers.
ATTENTION!
Risque d'explosion avec l'échange inadéquat de la
batterie. Remplacement seulement par le même ou un
type équivalent recommandé par le producteur.
L'évacuation des batteries usagées conformément à des
indications du fabricant.
PRECA CION!
Peligro de explosión si la batería se sustituye
incorrectamente. Sustituya solamente por el mismo o
tipo equivalente recomendado por el fabricante.
Disponga las baterías usadas según las instrucciones del
fabricante.
ADVARSEL!
Lithiumbatteri – Eksplosionsfare ved fejlagtig
håndtering. dskiftning må kun ske med batteri af
samme fabrikat og type. Levér det brugte batteri tilbage
til leverandøren.
ADVARSEL!
Eksplosjonsfare ved feilaktig skifte av batteri. Benytt
samme batteritype eller en tilsvarende type anbefalt av
apparatfabrikanten. Brukte batterier kasseres i henhold
til fabrikantens instruksjoner.
VARNING!
Explosionsfara vid felaktigt batteribyte. Använd samma
batterityp eller en ekvivalent typ som rekommenderas
av apparattillverkaren. Kassera använt batteri enligt
fabrikantens instruktion.
VAROIT S!
Paristo voi räjähtää, jos se on virheellisesti asennettu.
Vaihda paristo ainoastaan lalteval- mistajan
suosittelemaan tyyppiln. Hävitä käytetty paristo
valmistajan ohjeiden mukaisesti.
2.8 Electromagnetic Compatibilit (EU)
This product is intended only for use in industrial areas. The most recent version of the EMC guidelines (EMC Directive
2004/108/EC) and/or the German EMC laws apply. If the user modifies and/or adds to the equipment (e.g.
installation of add-on cards) the prerequisites for the CE conformity declaration (safety requirements) may no longer
apply.
Warning This is a class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.

www.kontron.com
10
MPC-pONE / MPC-pONE Connectors & Operating Elements
3MPC-pONE Connectors & Operating Elements
3.1 Front Panel
Position Description Connector Type Information
1 Power indicator LED Double LED (upper, green) Section 4.2
2 Hard disk activity LED Double LED (lower, red) Section 4.3
3 Power switch
4 Reset switch
5 Audio Line-In Audio jack 3.5mm Stereo audio
6 Audio Line-Out Audio jack 3.5mm Stereo audio
7 Dual SB port 2x SB-A (female) SB 2.0
See Appendix A for the pin assignments.
1
4
3
2
6
5
7

www.kontron.com
11
MPC-pONE / MPC-pONE Connectors & Operating Elements
3.2 Back Panel
Position Description Connector Type Information
8 LAN 1Gbit/s RJ-45
9 DVI-D DVI No VGA signal on DVI connector
10 Dual SB Port 2x SB-A (female) SB 2.0
11 Power Jack Power jack 2.1mm Power supply +5V
See Appendix A for the pin assignments.
8 9 10 11

www.kontron.com
12
MPC-pONE / Functions
4Functions
4.1 Block Diagram
The MPC-pONE is equipped with a Single Board Computer (picoITX-SP with Intel® Z510 1.1GHz or Intel® Z530 with
Intel® Z530 1.6GHz) The pONE is a fanless system with a compact aluminum chassis with cooling fins.
You will find more information on the picoITX-SP datasheet on www.kontron.com.

www.kontron.com
13
MPC-pONE / Functions
4.2 Power LEDs (ON / 5VSB)
LED State Description
L1 OFF Off / S5
L1 OFF Standby / S3
L1 ON System is running / S0
4.3 Indicator LEDs L2, L3 & L4
LED Description
L2 Disk activity (hard disk)
L3 / L4 The network transmission rate and activity are indicated by two LEDs. LED10 (10 Mbit; single color LED) and
LED100/LED1000 (100 Mbit respectively 1 Gbit; two color LED).
4.4 WOL (Wake-on-LAN)
The LAN chip is powered in the S3 state and wakes up the system if a magic packet is received.
Note: WakeOnLan must also be enabled in the operating systems.
L 2
L 1

www.kontron.com
14
MPC-pONE / BIOS Setup
5BIOS Setup
The MPC-pONE setup is similar to the setup of the picoITX-SP. The setup of this BIOS is described in the picoITX-SP ser
Guide which is available on www.kontron.com.
5.1 Enter BIOS Setup
To enter the BIOS setup, press <DEL> after starting the MPC-pONE system.

www.kontron.com
15
MPC-pONE / Getting Started
6Getting Started
1. Connect a DVI monitor to the DVI connector.
2. Plug a keyboard and/or mouse to the SB connector(s).
3. Make sure all connections have been made correctly.
4. Connect the external power supply to the power supply (2.1mm jack) connector.
5. Turn on the system by pushing the power button on front panel.
6. Enter the BIOS by pressing the Del key during boot-up.
7. Make all changes in the BIOS Setup. (More information can be found on the picoITX-SP datasheet at
www.kontron.com).

www.kontron.com
16
MPC-pONE / Appendix A: Pin Assignments of the Connectors
7Appendix A: Pin Assignments of the Connectors
7.1 DVI
7.2 Double USB T pe A
Pin Signal Name Pin Signal Name
1 TMDS2- 16 TMDS_HPD
2 TMDS2+ 17 TMDS0-
3 GND 18 TMDS0+
4 NC 19 GND
5 NC 20 NC
6 DDC_CLK 21 NC
7 DDC_DATA 22 GND
8 NC 23 TMDS_CLK+
9 TMDS1- 24 TMDS_CLK-
10 TMDS1+ C1 NC
11 GND C2 NC
12 NC C3 NC
13 NC C4 NC
14 VCC5 C5 GND
15 GND
Pin SB ( pper) Pin SB (Lower)
1 +5V 5 +5V
2 Data - 6 Data -
3 Data + 7 Data +
4 GND 8 GND

www.kontron.com
17
MPC-pONE / Appendix A: Pin Assignments of the Connectors
7.3 LAN (RJ-45)
7.4 Power (2.1mm)
 To protect the external power lines of peripheral devices, make sure that the wires have the right diameter to
withstand the maximum available current and be sure the enclosure of the peripheral device fulfils the fire-
protecting conditions of IEC/EN 60950.
Pin Signal Name Function
1 TXD+ / BI_D1+ 10/100 transmit / 1000 pair 1 (positive)
2 TXD- / BI_D1- 10/100 transmit / 1000 pair 1 (negative)
3 RXD+ / BI_D2+ 10/100 receive / 1000 pair 2 (positive)
4 BI_D3+ 1000 pair 3 (positive)
5 BI_D3- 1000 pair 3 (negative)
6 RXD- / BI_D2- 10/100 receive / 1000 pair 2 (negative)
7 BI_D4+ 1000 pair 4 (positive)
8 BI_D4- 1000 pair 4 (negative)
Pin Signal Name Function
1 VCC  Power supply +5V
2 GND Ground

www.kontron.com
18
MPC-pONE / Appendix B: Mechanical Dimensions
8Appendix B: Mechanical Dimensions
All dimensions are in mm.