Kontron CP6012 User manual

Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | [e-mail] | www.artisantg.com
SM
View
Instra

If it’s embedded, it’s Kontron.
» User Guide «
P R E L I M I N A R Y
CP6012
6U CompactPCI Processor Board based on
the Intel® Core™ Duo Processor and
the Intel® Core™ 2 Duo Processor with
the Intel® E7520 Chipset
Doc. ID: 33274, Rev. 5.0
September 18, 2009
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Preface CP6012
Page ii ID 33274, Rev. 5.0
P R E L I M I N A R Y
Revision History
Imprint
Kontron Modular Computers GmbH may be contacted via the following:
MAILING ADDRESS TELEPHONE AND E-MAIL
Kontron Modular Computers GmbH +49 (0) 800-SALESKONTRON
Sudetenstraße 7 [email protected]
D - 87600 Kaufbeuren Germany
For further information about other Kontron products, please visit our Internet web site:
www.kontron.com.
Disclaimer
Copyright © 2009 Kontron AG. All rights reserved. All data is for information purposes only and
not guaranteed for legal purposes. Information has been carefully checked and is believed to
be accurate; however, no responsibility is assumed for inaccuracies. Kontron and the Kontron
logo and all other trademarks or registered trademarks are the property of their respective own-
ers and are recognized. Specifications are subject to change without notice.
Publication Title: CP6012: 6U CompactPCI Processor Board based on the Intel® Core™
Duo Processor and the Intel® Core™ 2 Duo Processor with the Intel®
E7520 Chipset
Doc. ID: 33274
Rev. Brief Description of Changes Date of Issue
1.0 Initial issue 25-Aug-2006
2.0 General update 21-Dec-2006
3.0 General update, deletion of appendix C, AMIBIOS8 23-Aug-2007
4.0 General update; added new narrow heat sink as a replacement for
the wide heat sink
27-Feb-2008
5.0 General update 18-Sep-2009
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

CP6012 Preface
ID 33274, Rev. 5.0 Page iii
P R E L I M I N A R Y
Table of Contents
Revision History .........................................................................................................ii
Imprint ........................................................................................................................ii
Disclaimer ..................................................................................................................ii
Table of Contents ......................................................................................................iii
List of Tables .............................................................................................................ix
List of Figures ......................................................................................................... xiii
Proprietary Note .......................................................................................................xv
Trademarks ..............................................................................................................xv
Environmental Protection Statement ........................................................................xv
Explanation of Symbols .......................................................................................... xvi
For Your Safety ...................................................................................................... xvii
High Voltage Safety Instructions ........................................................................ xvii
Special Handling and Unpacking Instructions ................................................... xvii
General Instructions on Usage ............................................................................. xviii
Two Year Warranty .................................................................................................. xix
1. Introduction ............................................................................. 1 - 3
1.1 Board Overview ....................................................................................... 1 - 3
1.2 Board-Specific Information ...................................................................... 1 - 4
1.3 System Expansion Capabilities ............................................................... 1 - 5
1.3.1 PMC Modules ................................................................................. 1 - 5
1.3.2 XMC Modules ................................................................................. 1 - 5
1.3.3 CTM80-3 Rear I/O Module ............................................................. 1 - 5
1.3.4 CP6012-MK2.5SATA Assembly Kit ................................................ 1 - 5
1.4 System Relevant Information .................................................................. 1 - 6
1.5 Board Diagrams ...................................................................................... 1 - 7
1.5.1 Functional Block Diagram ............................................................... 1 - 7
1.5.2 Front Panel ..................................................................................... 1 - 8
1.5.3 Board Layout .................................................................................. 1 - 9
1.6 Technical Specification .......................................................................... 1 - 11
1.7 Kontron Software Support ..................................................................... 1 - 17
1.8 Standards .............................................................................................. 1 - 17
1.9 Related Publications ............................................................................. 1 - 18
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Preface CP6012
Page iv ID 33274, Rev. 5.0
P R E L I M I N A R Y
2. Functional Description ............................................................ 2 - 3
2.1 CPU, Memory and Chipset ......................................................................2 - 3
2.1.1 CPU .................................................................................................2 - 3
2.1.2 Memory ...........................................................................................2 - 5
2.1.3 Intel®E7520 Chipset Overview ......................................................2 - 6
2.1.3.1 Memory Controller Hub E7520 ...............................................2 - 6
2.1.3.2 I/O Controller Hub 6300ESB ...................................................2 - 6
2.2 Peripherals ...............................................................................................2 - 7
2.2.1 Timer ...............................................................................................2 - 7
2.2.2 Watchdog Timer ..............................................................................2 - 7
2.2.3 Battery .............................................................................................2 - 7
2.2.4 Reset ...............................................................................................2 - 8
2.2.5 SMBus Devices ...............................................................................2 - 8
2.2.6 Thermal Management/System Monitoring ......................................2 - 8
2.2.7 Serial EEPROM ..............................................................................2 - 9
2.2.8 FLASH Memory ...............................................................................2 - 9
2.2.8.1 BIOS FLASH (Firmware Hub) .................................................2 - 9
2.2.8.2 CompactFlash .........................................................................2 - 9
2.3 Board Interfaces ....................................................................................2 - 10
2.3.1 Front Panel LEDs ..........................................................................2 - 10
2.3.1.1 IPMI LEDs .............................................................................2 - 10
2.3.1.2 Watchdog and Overtemperature LEDs .................................2 - 10
2.3.1.3 Front-I and Front-II General Purpose LEDs .......................... 2 - 11
2.3.1.4 Hot Swap LED ......................................................................2 - 11
2.3.2 USB Interfaces ..............................................................................2 - 12
2.3.3 Graphics Controller .......................................................................2 - 12
2.3.3.1 Video Resolution ...................................................................2 - 13
2.3.3.2 CRT Interface and Connector J10 ........................................2 - 13
2.3.4 COM Ports .....................................................................................2 - 14
2.3.5 Floppy Drive Interface ...................................................................2 - 14
2.3.6 Gigabit Ethernet ............................................................................2 - 15
2.3.7 EIDE Interfaces .............................................................................2 - 16
2.3.7.1 CompactFlash Socket ...........................................................2 - 16
2.3.8 Extension Connector J12 ..............................................................2 - 18
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

CP6012 Preface
ID 33274, Rev. 5.0 Page v
P R E L I M I N A R Y
2.3.9 Keyboard/Mouse Interface ............................................................ 2 - 18
2.3.10 Serial ATA Interface ...................................................................... 2 - 19
2.3.11 Serial ATA Connector J22 ............................................................. 2 - 19
2.3.12 2.5" SATA HDD Extension Connectors J23 .................................. 2 - 20
2.3.13 PMC Interface ............................................................................... 2 - 21
2.3.13.1 PMC Connectors J25, J26, J27 and J28 Pinouts ................. 2 - 22
2.3.14 XMC Interface ............................................................................... 2 - 24
2.3.15 CompactPCI Interface .................................................................. 2 - 25
2.3.15.1 System Master Configuration ............................................... 2 - 25
2.3.15.2 Peripheral Master Configuration (Passive Mode) ................ 2 - 25
2.3.15.3 Packet Switching Backplane (PICMG 2.16) ......................... 2 - 25
2.3.15.4 Hot Swap Support ................................................................ 2 - 25
2.3.15.5 Power Ramping .................................................................... 2 - 25
2.3.15.6 Precharge ............................................................................. 2 - 25
2.3.15.7 Handle Switch ...................................................................... 2 - 26
2.3.15.8 ENUM# Interrupt .................................................................. 2 - 26
2.3.15.9 Hot Swap LED ...................................................................... 2 - 26
2.3.16 CompactPCI Bus Connector ......................................................... 2 - 27
2.3.16.1 CompactPCI Connector Keying ........................................... 2 - 27
2.3.16.2 CompactPCI Connectors J1 and J2 Pinouts ........................ 2 - 28
2.3.16.3 CompactPCI Rear I/O Connectors J3-J5 and Pinouts ......... 2 - 32
2.3.16.4 Rear I/O Configuration ......................................................... 2 - 36
2.4 Intelligent Platform Management Interface ............................................ 2 - 37
2.4.1 Technical Background of IPMI ...................................................... 2 - 37
2.4.2 IPMI Glossary ........................................................................................2 - 38
2.4.3 IPMI Implementation on the CP6012 ............................................ 2 - 39
2.4.3.1 Sensors Implemented on the CP6012 ................................. 2 - 40
2.4.4 Data Repositories ......................................................................... 2 - 41
3. Installation ............................................................................... 3 - 3
3.1 Safety Requirements ............................................................................... 3 - 3
3.2 CP6012 Initial Installation Procedures .................................................... 3 - 4
3.3 Standard Removal Procedures ............................................................... 3 - 5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Preface CP6012
Page vi ID 33274, Rev. 5.0
P R E L I M I N A R Y
3.4 Hot Swap Procedures ..............................................................................3 - 5
3.4.1 System Master Hot Swap ................................................................3 - 5
3.4.2 Peripheral Hot Swap Procedure ......................................................3 - 6
3.5 Installation of CP6012 Peripheral Devices ..............................................3 - 7
3.5.1 CompactFlash Installation ...............................................................3 - 7
3.5.2 USB Device Installation ...................................................................3 - 7
3.5.3 Rear I/O Device Installation .............................................................3 - 8
3.5.4 Battery Replacement .......................................................................3 - 8
3.5.5 Hard Disk Installation ......................................................................3 - 8
3.6 Software Installation ................................................................................3 - 9
4. Configuration ........................................................................... 4 - 3
4.1 Jumper Description ..................................................................................4 - 3
4.1.1 Clearing BIOS CMOS Setup ...........................................................4 - 3
4.1.2 Shorting Chassis GND (Shield) to Logic GND ................................4 - 3
4.1.3 BIOS Firmware Hub Flash Configuration ........................................4 - 4
4.1.4 M66EN Configuration ......................................................................4 - 4
4.2 Interrupts ..................................................................................................4 - 5
4.3 Onboard PCI Interrupt Routing ................................................................4 - 6
4.4 Memory Map ............................................................................................4 - 7
4.4.1 Memory Map for the 1st Megabyte .................................................4 - 7
4.4.2 I/O Address Map .............................................................................4 - 8
4.5 CP6012-Specific Registers ......................................................................4 - 9
4.5.1 BIOS Boot Order Control Register ..................................................4 - 9
4.5.2 Watchdog Timer Control Register .................................................4 - 10
4.5.3 Geographic Addressing Register ..................................................4 - 12
4.5.4 Hardware and Logic Revision Index Register ...............................4 - 12
4.5.5 CPCI Reset Status Register ..........................................................4 - 13
4.5.6 I/O Status Register ........................................................................4 - 14
4.5.7 I/O Configuration Register .............................................................4 - 15
4.5.8 Board ID Register ..........................................................................4 - 16
4.5.9 Board Interrupt Configuration Register .........................................4 - 17
4.5.10 Hot Swap Status Register .............................................................4 - 18
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

CP6012 Preface
ID 33274, Rev. 5.0 Page vii
P R E L I M I N A R Y
4.5.11 Board-Specific LED Control Register ........................................... 4 - 19
4.5.12 Delay Timer Control/Status Register ............................................ 4 - 20
4.6 BMC-Specific Registers ........................................................................ 4 - 21
4.6.1 BMC Configuration Register ......................................................... 4 - 21
4.6.1.1 BMC Interrupt Configuration Register .................................. 4 - 22
4.6.2 IPMI Keyboard Control Style Interface ......................................... 4 - 23
5. Power Considerations ............................................................ 5 - 3
5.1 System Power ......................................................................................... 5 - 3
5.1.1 CP6012 Baseboard ........................................................................ 5 - 3
5.1.2 Backplane ....................................................................................... 5 - 4
5.1.3 Power Supply Units ........................................................................ 5 - 4
5.1.3.1 Start-Up Requirement ............................................................ 5 - 4
5.1.3.2 Power-Up Sequence .............................................................. 5 - 5
5.1.3.3 Tolerance ................................................................................ 5 - 5
5.1.3.4 Regulation .............................................................................. 5 - 6
5.1.3.5 Rise Time Diagram ................................................................ 5 - 6
5.2 Power Consumption ................................................................................ 5 - 7
5.2.1 Power Consumption of the CP6012 Accessories ........................... 5 - 9
5.2.2 Power Consumption of the Dual Gigabit Ethernet Controller ......... 5 - 9
5.3 Start-Up Currents of the CP6012 .......................................................... 5 - 10
5.4 Power Available for PMC Devices ......................................................... 5 - 10
6. Thermal Considerations ......................................................... 6 - 3
6.1 Board Internal Thermal Regulation ......................................................... 6 - 3
6.1.1 CPU Internal Thermal Supervision ................................................. 6 - 3
6.1.2 CPU Emergency Thermal Supervision (Thermtrip) ........................ 6 - 4
6.2 Thermal Management Recommendations .............................................. 6 - 4
6.3 External Thermal Regulation ................................................................... 6 - 5
6.3.1 Heat Sink ........................................................................................ 6 - 5
6.3.2 Forced Airflow ................................................................................. 6 - 5
6.3.3 Thermal Characteristic Graphs ....................................................... 6 - 6
6.3.4 Peripherals .................................................................................... 6 - 10
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Preface CP6012
Page viii ID 33274, Rev. 5.0
P R E L I M I N A R Y
A. CTM80-3 RIO Module .............................................................. A - 3
A.1 Introduction ............................................................................................. A - 3
B. CP6012-MK2.5SATA Assembly Kit ........................................ B - 3
B.1 CP6012-EXT-SATA Module Overview .................................................... B - 3
B.2 Technical Specifications ......................................................................... B - 3
B.3 CP6012-EXT-SATA Functional Block Diagram ....................................... B - 3
B.4 CP6012-EXT-SATA Module Layout ........................................................ B - 4
B.4.1 CP6012-EXT-SATA Module Layout ................................................ B - 4
B.5 Module Interfaces ................................................................................... B - 5
B.5.1 Board-to-Board Connectors J1 and J3 ........................................... B - 5
B.5.2 SATA Connector J2 ........................................................................ B - 6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

CP6012 Preface
ID 33274, Rev. 5.0 Page ix
P R E L I M I N A R Y
List of Tables
1-1 System Relevant Information .................................................................... 1 - 6
1-2 CP6012 Main Specifications .................................................................... 1 - 11
1-3 Standards ................................................................................................ 1 - 17
1-4 Additional Standards for Boards Ordered with Ruggedized Service ....... 1 - 18
1-5 Related Publications ................................................................................ 1 - 18
2-1 Processors Supported on the CP6012 ...................................................... 2 - 4
2-2 Maximum Power Dissipation of Processors (CPU only) ............................ 2 - 4
2-3 CPU Frequency in the Various SpeedStep® Modes ................................. 2 - 4
2-4 Memory Options Utilizing SODIMM Sockets ............................................. 2 - 5
2-5 SMBus Device Addresses ......................................................................... 2 - 8
2-6 EEPROM Address Map ............................................................................. 2 - 9
2-7 IPMI LEDs Function ................................................................................. 2 - 10
2-9 Front-I and Front-II LEDs Function .......................................................... 2 - 11
2-8 Watchdog and Overtemperature LEDs Function ..................................... 2 - 11
2-10 USB Connectors J7 and J8 Pinout .......................................................... 2 - 12
2-11 Partial List of Display Modes Supported .................................................. 2 - 13
2-12 D-Sub CRT Connector J10 Pinout ........................................................... 2 - 13
2-13 Serial Port Con. J9 (COM1) Pinout ......................................................... 2 - 14
2-14 Pinouts of J6A/B Based on the Implementation ...................................... 2 - 15
2-15 CompactFlash Connector J17 Pinout ...................................................... 2 - 17
2-16 Keyboard Connector J21 Pinout .............................................................. 2 - 18
2-17 SATA Connector J22 Pinout .................................................................... 2 - 19
2-18 SATA Extension Connector J23 Pinout ................................................... 2 - 20
2-19 Onboard PCI Configuration ..................................................................... 2 - 21
2-20 PMC Connectors J26 and J28 Pinouts .................................................... 2 - 22
2-21 PMC Connectors J25 and J27 Pinouts .................................................... 2 - 23
2-22 XMC Connector J15 Pinout ..................................................................... 2 - 24
2-23 Coding Key Colors on J1 ......................................................................... 2 - 27
2-24 CompactPCI Bus Connector J1 System Slot Pinout ............................... 2 - 28
2-25 CompactPCI Bus Connector J1 Peripheral Slot Pinout ........................... 2 - 29
2-26 64-bit CompactPCI Bus Connector J2 System Slot Pinout ..................... 2 - 30
2-27 64-bit CompactPCI Bus Connector J2 Peripheral Slot Pinout ................. 2 - 31
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com