Kontron CP6001-R3 User manual

CP6001-R3
Ruggedized
6U CompactPCI Processor Board Based
on the Intel® Core™ Duo Processor and
the Intel® Core™2 Duo Processor with the
Intel® 945GM Express Chipset
User Guide
Doc. ID: 1027-2047, Rev. 1.0
December 2, 2008

Preface CP6001-R3
Page ii ID 1027-2047, Rev. 1.0
Revision History
Imprint
Kontron Modular Computers GmbH may be contacted via the following:
MAILING ADDRESS TELEPHONE AND E-MAIL
Kontron Modular Computers GmbH +49 (0) 800-SALESKONTRON
Sudetenstraße 7 [email protected]
D - 87600 Kaufbeuren Germany
For further information about other Kontron products, please visit our Internet web site:
www.kontron.com.
Disclaimer
Copyright © 2008 Kontron AG. All rights reserved. All data is for information purposes only and
not guaranteed for legal purposes. Information has been carefully checked and is believed to
be accurate; however, no responsibility is assumed for inaccuracies. Kontron and the Kontron
logo and all other trademarks or registered trademarks are the property of their respective own-
ers and are recognized. Specifications are subject to change without notice.
Publication Title:
CP6001-R3: Ruggedized 6U CompactPCI Processor Board Based
on the Intel® Core™ Duo Processor and the Intel® Core™2 Duo
Processor with the Intel® 945GM Express Chipset
Doc. ID: 1027-2047
Rev. Brief Description of Changes Date of Issue
1.0 Initial issue 2-Dec-2008

CP6001-R3 Preface
ID 1027-2047, Rev. 1.0 Page iii
Table of Contents
Revision History .........................................................................................................ii
Imprint ........................................................................................................................ii
Disclaimer ..................................................................................................................ii
Table of Contents ......................................................................................................iii
List of Tables ............................................................................................................ vii
List of Figures ...........................................................................................................ix
Proprietary Note ........................................................................................................xi
Trademarks ...............................................................................................................xi
Environmental Protection Statement .........................................................................xi
Explanation of Symbols ........................................................................................... xii
For Your Safety ....................................................................................................... xiii
High Voltage Safety Instructions ......................................................................... xiii
Special Handling and Unpacking Instructions .................................................... xiii
General Instructions on Usage ............................................................................... xiv
Two Year Warranty ...................................................................................................xv
1. Introduction ............................................................................. 1 - 3
1.1 Board Overview ....................................................................................... 1 - 3
1.2 Board-Specific Information ...................................................................... 1 - 4
1.3 System Expansion Capabilities ............................................................... 1 - 5
1.3.1 CCPMC Module ............................................................................. 1 - 5
1.4 Board Diagrams ...................................................................................... 1 - 5
1.4.1 Functional Block Diagram ............................................................... 1 - 5
1.4.2 Board Layout .................................................................................. 1 - 6
1.5 Technical Specification ............................................................................ 1 - 8
1.6 Kontron Software Support ..................................................................... 1 - 12
1.7 Standards .............................................................................................. 1 - 12
1.8 Related Publications ............................................................................. 1 - 13
2. Functional Description ........................................................... 2 - 3
2.1 CPU, Memory and Chipset ...................................................................... 2 - 3
2.1.1 CPU ................................................................................................ 2 - 3
2.1.2 Memory ........................................................................................... 2 - 5

Preface CP6001-R3
Page iv ID 1027-2047, Rev. 1.0
2.1.3 Intel® 945GM Express Chipset Overview .......................................2 - 5
2.1.4 Mobile Intel® 945GM Express Chipset GMCH ...............................2 - 5
2.1.5 I/O Controller Hub (ICH7R) .............................................................2 - 6
2.2 Peripherals ...............................................................................................2 - 6
2.2.1 Timer ...............................................................................................2 - 6
2.2.2 Watchdog Timer ..............................................................................2 - 6
2.2.3 Reset ...............................................................................................2 - 7
2.2.4 SMBus Devices ...............................................................................2 - 7
2.2.5 Thermal Management/System Monitoring ......................................2 - 7
2.2.6 Serial EEPROM ..............................................................................2 - 8
2.2.7 FLASH Memory ...............................................................................2 - 8
2.2.8 Trusted Platform Module (TPM) 1.2 ................................................2 - 9
2.3 Board Interfaces ......................................................................................2 - 9
2.3.1 USB Interfaces ................................................................................2 - 9
2.3.2 Graphics Controller .......................................................................2 - 10
2.3.3 CCPMC Interface .......................................................................... 2 - 11
2.3.4 COM Ports .....................................................................................2 - 14
2.3.5 Gigabit Ethernet ............................................................................2 - 14
2.3.6 Serial ATA Interface .......................................................................2 - 14
2.3.7 CompactPCI Interface ...................................................................2 - 14
2.3.8 CompactPCI Bus Connector .........................................................2 - 16
2.4 Intelligent Platform Management Interface ............................................2 - 25
2.4.1 Technical Background of IPMI .......................................................2 - 25
2.4.2 IPMI Glossary ........................................................................................2 - 26
2.4.3 IPMI Implementation on the CP6001-R3 .......................................2 - 27
2.4.4 Sensors Implemented on the CP6001-R3 ....................................2 - 28
2.4.5 Data Repositories ..........................................................................2 - 29
3. Installation ................................................................................ 3 - 3
3.1 Safety Requirements ...............................................................................3 - 3
3.2 Initial Installation Procedures ...................................................................3 - 4
3.3 Standard Removal Procedures ................................................................3 - 6
3.4 Hot Swap Procedures ..............................................................................3 - 6

CP6001-R3 Preface
ID 1027-2047, Rev. 1.0 Page v
3.4.1 System Master Hot Swap ............................................................... 3 - 7
3.4.2 CP6001-R3 Hot Swap Procedure ................................................... 3 - 7
3.5 Installation of CP6001-R3 Peripheral Devices ........................................ 3 - 9
3.5.1 USB Device Installation .................................................................. 3 - 9
3.5.2 Rear I/O Device Installation ............................................................ 3 - 9
3.6 CCPMC Module Installation .................................................................... 3 - 9
3.7 Software Installation ................................................................................ 3 - 9
4. Configuration ........................................................................... 4 - 3
4.1 Jumper Description ................................................................................. 4 - 3
4.1.1 Clearing BIOS CMOS Setup ........................................................... 4 - 3
4.1.2 COM2 Termination Jumper Settings ............................................... 4 - 3
4.1.3 Shorting Chassis GND (Shield) to Logic GND ................................ 4 - 4
4.2 Write Protection for Non-Volatile Memory Devices ................................. 4 - 4
4.3 I/O Address Map ..................................................................................... 4 - 5
4.4 CP6001-R3-Specific Registers ............................................................... 4 - 6
4.4.1 Status Register 0 ............................................................................ 4 - 6
4.4.2 Status Register 1 ............................................................................ 4 - 7
4.4.3 Control Register 0 ........................................................................... 4 - 8
4.4.4 Control Register 1 ........................................................................... 4 - 8
4.4.5 Device Protection Register ............................................................. 4 - 9
4.4.6 Reset Status Register ................................................................... 4 - 10
4.4.7 Board Interrupt Configuration Register ......................................... 4 - 11
4.4.8 Board ID Register ......................................................................... 4 - 11
4.4.9 Board and PLD Revision Register ................................................ 4 - 12
4.4.10 Geographic Addressing Register .................................................. 4 - 12
4.4.11 Delay Timer Register .................................................................... 4 - 13
4.4.12 Watchdog Timer Control Register ................................................ 4 - 14
4.4.13 LED Configuration Register .......................................................... 4 - 16
4.4.14 LED Control Register .................................................................... 4 - 16
4.4.15 General Purpose Data Register .................................................... 4 - 17
4.4.16 General Purpose Control Register ................................................ 4 - 17

Preface CP6001-R3
Page vi ID 1027-2047, Rev. 1.0
4.5 BMC-Specific Registers .........................................................................4 - 18
4.5.1 IPMI Boot Configuration Register ..................................................4 - 18
4.5.2 IPMI Controller Configuration Register .........................................4 - 19
4.5.3 IPMI Controller Status Register .....................................................4 - 20
4.5.4 IPMI Reset Status Register ...........................................................4 - 21
4.5.5 IPMI Keyboard Control Style Interface ..........................................4 - 22
5. Power Considerations ............................................................. 5 - 3
5.1 System Power ..........................................................................................5 - 3
5.1.1 CP6001-R3 Baseboard ...................................................................5 - 3
5.1.2 Backplane .......................................................................................5 - 4
5.1.3 Power Supply Units .........................................................................5 - 4
5.2 Power Consumption ................................................................................5 - 6
5.2.1 Power Consumption of the CP6001-R3 Accessories ......................5 - 8
5.2.2 Power Consumption of the Gigabit Ethernet Controller ..................5 - 8
5.3 Start-Up Currents of the CP6001-R3 .......................................................5 - 9
5.4 Power Available for CCPMC Devices ......................................................5 - 9
6. Thermal Considerations ......................................................... 6 - 3
6.1 Board Internal Thermal Monitoring ..........................................................6 - 3
6.2 Processor Thermal Monitoring and Regulation .......................................6 - 4
6.2.1 Digital Thermal Sensor (DTS) .........................................................6 - 4
6.2.2 Thermal Diode Sensor ....................................................................6 - 4
6.2.3 Thermal Monitor 1 (TM1) ................................................................6 - 4
6.2.4 Thermal Monitor 2 (TM2) ................................................................6 - 5
6.2.5 TM1 and TM2 Operation .................................................................6 - 5
6.2.6 Catastrophic Cooling Failure Sensor ...............................................6 - 5
6.3 Thermal Characteristics for the CP6001-R3 ............................................6 - 5
6.4 Peripherals ...............................................................................................6 - 7

CP6001-R3 Preface
ID 1027-2047, Rev. 1.0 Page vii
List of Tables
1-1 CP6001-R3 Main Specifications ................................................................ 1 - 8
1-2 Standards for the R3 Version ................................................................... 1 - 12
1-3 Related Publications ................................................................................ 1 - 13
2-1 Processors Supported on the CP6001-R3 ................................................ 2 - 4
2-2 Maximum Power Dissipation of the Processors (CPU only) ...................... 2 - 4
2-3 CPU Frequency in the Various SpeedStep® Modes ................................. 2 - 4
2-4 Supported Memory Configurations ............................................................ 2 - 5
2-5 SMBus Device Addresses ......................................................................... 2 - 7
2-6 EEPROM Address Map ............................................................................. 2 - 8
2-7 Onboard PCI Configuration ..................................................................... 2 - 11
2-8 CCPMC Connectors J7 and J9 Pinouts ................................................... 2 - 12
2-9 CCPMC Connector J8 Pinout .................................................................. 2 - 13
2-10 CompactPCI Bus Connector J1 System Slot Pinout ............................... 2 - 17
2-11 CompactPCI Bus Connector J1 Peripheral Slot Pinout ........................... 2 - 18
2-12 64-bit CompactPCI Bus Connector J2 System Slot Pinout ..................... 2 - 19
2-13 64-bit CompactPCI Bus Connector J2 Peripheral Slot Pinout ................. 2 - 20
2-14 CompactPCI Rear I/O Connector J3 Pinout ............................................ 2 - 21
2-15 CompactPCI Rear I/O Connector J3 Signals ........................................... 2 - 22
2-16 CompactPCI Rear I/O Connector J4 Pinout ............................................ 2 - 23
2-17 CompactPCI Rear I/O Connector J5 Pinout ............................................ 2 - 24
2-18 CompactPCI Rear I/O Connector J5 Signals ........................................... 2 - 25
2-19 Processor, Chipset and General Board Supervision ............................... 2 - 28
2-20 Various BMC/SMC Sensors .................................................................... 2 - 28
2-21 CompactPCI Sensors .............................................................................. 2 - 28
2-22 Onboard Power Supply Supervision ........................................................ 2 - 29
2-23 Onboard Voltage Sensors ....................................................................... 2 - 29
2-24 Temperature Sensors .............................................................................. 2 - 29
2-25 Fan Sense Sensors ................................................................................. 2 - 29
4-1 Clearing BIOS CMOS Setup ..................................................................... 4 - 3
4-2 Jumper Setting for RS-422 TXD Termination (COM2) .............................. 4 - 3
4-3 Jumper Setting for RS-422 RXD Termination (COM2) .............................. 4 - 3
4-4 Write Protection for Non-Volatile Memory Devices .................................... 4 - 4

Preface CP6001-R3
Page viii ID 1027-2047, Rev. 1.0
4-5 I/O Address Map ........................................................................................ 4 - 5
4-6 Status Register 0 ........................................................................................ 4 - 6
4-7 Status Register 1 ........................................................................................ 4 - 7
4-8 Control Register 0 ...................................................................................... 4 - 8
4-9 Control Register 1 ...................................................................................... 4 - 8
4-10 Device Protection Register ......................................................................... 4 - 9
4-11 Reset Status Register .............................................................................. 4 - 10
4-12 Board Interrupt Configuration Register .................................................... 4 - 11
4-13 Board ID Register ..................................................................................... 4 - 11
4-14 Board and PLD Revision Register ........................................................... 4 - 12
4-15 Geographic Addressing Register ............................................................. 4 - 12
4-16 Delay Timer Register ............................................................................... 4 - 13
4-17 Watchdog Timer Control Register ............................................................ 4 - 15
4-18 LED Configuration Register ..................................................................... 4 - 16
4-19 LED Control Register ............................................................................... 4 - 16
4-20 General Purpose Data Register ............................................................... 4 - 17
4-21 General Purpose Control Register ........................................................... 4 - 17
4-22 IPMI Boot Configuration Register ............................................................. 4 - 18
4-23 IPMI Controller Configuration Register .................................................... 4 - 19
4-24 COM Port Routing for the Firmware Update and Debugging Purposes .. 4 - 19
4-25 IPMI Controller Status Register ................................................................ 4 - 20
4-26 IPMI Reset Status Register ...................................................................... 4 - 21
5-1 Maximum Input Power Voltage Limits ........................................................ 5 - 3
5-2 DC Operational Input Voltage Ranges ....................................................... 5 - 3
5-3 Input Voltage Characteristics ..................................................................... 5 - 5
5-4 Power Consumption: CP6001-R3 with DOS .............................................. 5 - 7
5-5 Power Consumption: CP6001-R3 with Linux/Win. XP in IDLE Mode ........ 5 - 7
5-6 Power Consumption: CP6001-R3 at 75% TDP .......................................... 5 - 7
5-7 Power Consumption: CP6001-R3 at 100% TDP ........................................ 5 - 8
5-8 Power Consumption of CP6001-R3 Accessories ....................................... 5 - 8
5-9 Intel® 82573L Gigabit Ethernet Controller Power Consumption ................ 5 - 8
5-10 Start-Up Currents of the CP6001-R3 ......................................................... 5 - 9
5-11 Maximum Output Power Limits .................................................................. 5 - 9
6-1 Maximum Reference Point Temperature at 100°C CPU Die Temperature 6 - 6

CP6001-R3 Preface
ID 1027-2047, Rev. 1.0 Page ix
List of Figures
1-1 CP6001-R3 Functional Block Diagram .................................................... 1 - 5
1-2 CP6001-R3 Board Layout (Front View) ................................................... 1 - 6
1-3 CP6001-R3 Board Layout (Reverse View) .............................................. 1 - 7
2-1 CCPMC Connectors J7, J8 and J9 ........................................................ 2 - 11
2-2 CPCI Connectors J1-J5 ......................................................................... 2 - 16
6-1 Temperature Sensor Placement (CP6001-R3 Top View) ......................... 6 - 3
6-2 Position of the Reference Point on the CP6001-R3 ................................. 6 - 6

Preface CP6001-R3
Page x ID 1027-2047, Rev. 1.0
This page has been intentionally left blank.