Kozyard 10'x12' Caesar User manual

Assembly Manual
Kozyard LLC Products
10’x12’ Caesar Hardtop Gazebo

IMPORTANT
3
Read this assembly manual PRIOR
to start assembly of the product.
The hardtop gazebo must be ANCHORED by
appropriate screws based on the ooring
where is being anchored to.

4
OPERATION
1. Hard top gazebo is a four-season products, meaning
that it may be left up year-round. However, any
accumulation of snow must always be removed from
the roof of the unit.
2. The unit must be anchored using the appropriate
screws based on the ooring which it is being
anchored to (not included).
3. Check all screws for tightness before and during us
age of the unit. Tighten the screws at least twice a
year.
4. If your product allows it, remove fabric mosquito nets,
mica and fabric curtains for winter storage.
FABRIC ROOF SUN SHELTERS
1. Mosquito nets must be removed and stored
2. The unit must be anchored using the appropriate
chored to (not included).
3. Check all screws for tightness before and during the
usage of the unit. Tighten the screws at least twice a
year.
4. Do not hang any items to the structure.
SAFETY INFORMATION
1. It is very important to read and follow the safety precau-
tions before assembly and during the use of the
product.
2. Keep all children and pets away from assembly area.
When assembling and using this product, basic safety
precautions must always be followed to reduce risks of
personal injuries and damages to the product and its
surroundings.
3. Ensure that all the parts are in the boxes before starting
the assembly. It is recommended to wear protective
gloves since some of the parts have sharp edges.
4. Your hard top gazebo will take at least 6 hours to putup.
You must schedule enough time to complete the
assembly. You cannot leave the product unattended if it
is not fully assembled, even if bolted to the ground. It is
recommended to be at least 2 people for a safe
assembly of the product.
5. Begin the assembly and install the product more than
1.8 m (6 ft.) away from any obstructions including, but
not limited to, a fence, overhanging branches, a laundry
line or electrical wires and as much as possible in a
place protected from the wind.
6. Always install the product on a leveled platform, your
hard top gazebo must be anchored to either wood or
concrete using the appropriate screws for the chosen.
7. Check all screws for tightness before and during the
use of the product. Tighten the screws at least twice a
year.
8. Do not place any type of heat source on/under the
structure or within 1.5 m (5 ft.) of the unit including, but
not limited to, a barbecue or a space heater.
9. Do not install the product in a space where there is the
possibility of high winds.
CARE AND CLEANING
1. For cleaning: use a domestic soap or a soft
detegentand wash with warm water using a sponge or
fabric cloth.Rinse with clean water.
2. Snow must always be removed from the roof of the
unit.
PLANNING ASSEMBLY
1. It is the consumer’s responsibility to comply with
building rules, regulations/zoning restrictions orders or
any other regional restrictions and obtain the required
permits before purchasing this product and installing it
2. Make sure that every part is in the box before beginning
installation.
3. Some parts may have sharp edges; it is recommended
to wear gloves, protection glasses and closed shoes.
4. You must schedule enough time to complete the
assembly.
5. You cannot leave the product unattended if it is not fully
assembled, even if bolted to the ground.
6. A minimum of 3 people is required for a safe assembly
of the product.
7. Follow each instruction carefully to ensure the strength
of the product.
8. To avoid damages to the product and its parts, use the
proper tools. Do not use the product as a support. The
use of a ladder is recommended.
9. Keep the instruction manual and the parts list in case of
future needs or references.
10. Do not assemble the product in days of wind or rain.

5
(Not Included)
Required tools
Safety google
GLOVES Safety HAT Phillips screw driver
Stepladder level

6
Colunm
ITEM Description
Ogee
Ogee
Ogee
Ogee
Roof bar
Corner Roof bar
Connect bar
Connect bar
Mosquito sidewall
QTY
A4
2
2
2
2
6
4
4
4
4
B
C
B1
C1
D
E
F
F1
H
A *4
B *2
B1 *2
C *2
C1 *2
D *6
E *4
F *4
F1 *4
H *4
H1 *4
（optional）

7
For mosquito
For sidewall
Corner Roof Bar
Eave Cover
Eave Cover
Ogee Connect Cover
Ogee Connect Cover
Outside Roof Connector
Outside Roof Connector
ITEM Description QTY
Base
Eave Connector End
Finishing End
Union Bar
Hook
G1
G2
G3
J1
J2
K
K1
L
M1
M2
P
4
4
4
4
4
1
1
4
6
4
4
36
G1 *4
G2 *4
G3 *2
K *1
K1 *1
J1 *4
L *4
M2 *4
P *4
J2 *4
M1 *6
（optional）
Q *36
Q *36
Q

8
ITEM
O4
4
2
2
4
4
93
2
32
20
60
1
O1
S
S1
N
N1
V
WA
X
X1
Y
Z
DESCRIPTION QTY
SCREW M6X15
SCREW M6X10
SCREW M4X8
HOOK
ALEEN KEY
SCREW ST4.8X12
ROOF PANEL
ROOF PANEL
ROOF PANEL
ROOF PANEL
ROOF PANEL
ROOF PANEL
O *4 S *4
O1 *4
N *4
S1 *4
Z *1
Wa *2
V M6 *15 93
X1 M4 *8 20
Y ST4.8*12 60
X M6 *10(D10*20) 32
N1 *4

9
x4
Parts required for this step:
STEP-1
A
A
L
V
L
A *4
V *12 L *4

10
For mosquito
For sidewall
Parts required for this step:
x2
x2
STEP-2
B *2
C *2 C1X2
B1 *2
b1
c1
c
b
Q *5
Q *4
Q *36
Q *36 （optional）

Parts required for this step:
11
x2
x2
STEP-3
P *4
V *40
B *2
B1 *2
C *2
B1
C1
C1
B1
B
B
V
P
P
C
C

Parts required for this step:
12
STEP-4
A
A
A
A
X *32
C1
C1
B1
B1
B
B
C
C

Parts required for this step:
13
STEP-5
J1 *4 J2 *4 Y *28
J1
Y
Y
J2
y
y

Parts required for this step:
14
STEP-6
Y
FF1
F *4
F1 *4
Y *32

Parts required for this step:
15
STEP-7
E *4
K1 *1
V *8
E
E
V
E
E
K1
K1
E

Parts required for this step:
16
STEP-8
V *4
E
A
E

Parts required for this step:
17
STEP-9
D
DD
D
D
D
D
V
V
K1 D
D *6 V *18

Parts required for this step:
18
STEP-10
K *1 Wa *2 V *1
K
K
K1
Wa
Wa
V

Parts required for this step:
19
Caution:
It is recomended to wear
protective gloves since some
of the parts have sharp edges.
STEP-11
N
OS
O1
N1
S1
O/S/O1
N/S1/N1
X1
N *4 S1 *2
X1 * 20
N1 *4
O1 * 4
S *2O *4

Parts required for this step:
20
Insert each the metal roof into the
slots by this way.
STEP-12
N *4 S1 *2 N1 *4O1 *4
S *2
O *4

Parts required for this step:
1
1
1
1
2
2
2
2
2
2
21
STEP-13
G1 *4
G2 *4
G3 *4
M2 *4 M1 *6
VX *10
G1
G1
G3
G2
G2
M2
VM1
V