Kozyard Moana Wicker Rocking Bistro Set User manual

Kozyard LLC Products
Assembly Manual
Moana Wicker Rocking Bistro Set
www.kozyard.com

X2
Assembly Bag
1
• Prior to assembly, ensure that you lay out and identify all the parts listed in the parts list.
• Tighten all nuts and bolts securely. Hand-tighten all bolts before use. Avoid using power tools or applying
excessive force during assembly and bolt tightening.
• If you encounter any difficulties during assembly or if any part is missing or damaged, please don't
hesitate to contact our customer service team via email at [e-mail] or by calling our toll-free
number at 866-355-0018.
Assembly Instructions
• The weight capacity of this chair is 250 lbs.
• Clean the frame components and fabric with a mild soap solution, then rinse thoroughly. Avoid using
bleach, acid, or any other solvents on either the fabric or frame components.
• For a comprehensive warranty policy, please visit www.kozyard.com. Be aware that warranty terms can
change without prior notification.
• For the best performance and safety of your chair, inspect and tighten all bolts and fasteners regularly.
Care and warranty

Rocking Chair
Seat
Back
Seat
Base
Right
Arm Rest
Reference Image Description QTY
Item
No.
Seat Back
Support
Left
Arm Rest
M6x35
Socket Head
Cap Screw
M6x20
Socket Head
Cap Screw
Flat
Washer
Screw
Cover
4-mm Allen
Key
A
B
C1
C2
D
E
F
G
H
I
2
(DO THIS TWO TIMES)
1pc
1pc
1pc
1pc
1pc
1pc
4pcs
8pcs
12pcs
12pcs
1. Attach the seatback (A) and the seat base
(B) using an M6 x 35 socket head cap screw (E)
with a flat washer (G) in two locations.
2. Flip the assembly upside down. Secure the
armrests (C & D) to the seat base (B) using M6
x 20 screws (F) with a washer (G) at four loca-

3
Rocking Chair
(DO THIS TWO TIMES)
3. Flip the assembly back. Secure the seatback (A) using M6 x 35 screws (E)
with a washer (G) in two locations.
4. Attach the seat back support (D) using
M6 x 20 screws (F)With a washer (G). Do this in
four places.
5. Complete the assembly, then secure and
tighten all the screws. Finally, place the screw
covers (H) over them

Coffee table
Table
Top
Reference Image Description QTY
Item
No.
J
J
J
K
K
K
K
K
L
L
M
E
F
G
H
I
M6x35
Socket Head
Cap Screw
M6x20
Socket Head
Cap Screw
Flat
Washer
Screw
Cover
4-mm Allen
Key
Legs
Leg
Support
Glass
Top
,
4
1pc
1pc
1pc
2pcs
2pcs
4pcs
8pcs
12pcs
12pcs
4. Attach the seat back support (D) using
M6 x 20 screws (F)With a washer (G). Do this in
four places.
1. Flip the assembly upside down. Attach the
table top (J) to the legs (K) using an M6x35
socket head cap screw (E) with a flat washer
(G).
2. While the assembly is still flipped over,
attach the leg supports (L) using M6x20
socket head cap screws (F) with flat washers
(G) in eight locations.