Kozyard Moana User manual

Assembly Manual
Wicker Rocking Bistro Set

Rocking Wicker Bistro Set
X2
Assembly Bag
1
.
.
.
.
Assembly Instruction
Before assembling, make sure that you lay out and identify all parts listed below in the parts list.
Install on level ground.
Keep in mind that not to tighten screw until you fully set up ,After set up, fully tighten screws.
Any question,please contact our customer service

Rocking Chair
1. Attach the seatback (A) and the seat base
(B) using a M6 x 35 socket head cap screw (E)
with a flat washer (G) .Do this in two places.
2. Flip the assembly upside down . Secure
the arm rests(C&D) to the seat base (B) using
M6 x 20 screws (F) (G). with a washer
Do this in four places.
Seat
Back
Seat
Base
Right
Arm Rest
Reference Image Description QTY
Item
No.
1PC
1PC
1PC
1PC
Seat Back
Support 1PC
Left
Arm Rest
4PCS
8PCS
12PCS
12PCS
1PC
M6x35
Socket Head
Cap Screw
M6x20
Socket Head
Cap Screw
Flat
Washer
Screw
Cover
4-mm Allen
Key
A
B
C1
C2
D
E
F
G
H
I
2
(DO THIS TWO TIMES)

3. Flip the assembly back. Secure the seat
back (A) using M6 x 35 screws (E) with a washer
(G).
Do this in two places.
4
5.
. Attach the seat back support (D) using
M6 x 20 screws (F) With a washer (G) . Do this in
four places.
3
Rocking Chair
(DO THIS TWO TIMES)
Completly assembly,then fix and tighten
all the screws. Finally place the screw
covers (H) over them.

Coffee table
Table
Top
Reference Image Description QTY
Item
No.
1PC
J
J
J
K
K
K
K
K
L
L
M
E
F
G
H
I
M6x35
Socket Head
Cap Screw
M6x20
Socket Head
Cap Screw
Flat
Washer
Screw
Cover
4-mm Allen
Key
2PC
2PC
1PC
4PCS
8PCS
12PCS
12PCS
1PC
Legs
Leg
Support
Glass
Top
1. Flip the assembly upside down. Attach
the table top (J) and the legs(K) using a M6x35
socket head cap screw (E) with a flat washer (G).
2. With the assembly still flipped over,
attach the leg supports (L) using M6x20 socket
head cap screw (F) with a flat waher(G). Do
this in eight places.
4
Do this in four places.

M
Coffee table
3. Flip the assembly back then place the glass top (M) on it.
5
4.Completly assembly,then fix and tighten
all the screws.Finally place the screw
Covers (H) over them.