KPN E160 Instruction manual


KPN E160
HSDPA USB-Modem
Quick Start Manual


Table of Contents
What Is in Your Packet 
Getting to Know Your KPN E60 HSDPA USB-Modem 3
Preparation 4
Installation/Removal Guide 5
Safety Information 7
Acronyms and Abbreviations 0
Thank you for choosing KPN E160 HSDPA USB-Modem.
With the KPN E160 HSDPA USB-Modem, you can access the Internet through mobile networks at a high speed.
Note: This manual briefs the prole of the KPN E160 HSDPA USB-Modem, and the preparation, installation
and un-installation process. For the operation of the management program (KPN Mobile Connect
Dashboard), see the appropriate User Manual.
What Is in Your Packet
The package of your KPN E60 HSDPA USB-Modem contains the following items:
• One KPN E60 HSDPA USB-Modem
• One USB-cable
• A Quick-start manual, printed on the inside of the box

3
Getting to Know Your
KPN E60 HSDPA USB-Modem
The following gure shows the appearance of the KPN E60 HSDPA USB-Modem. It is only for your reference. The
actual product may differ.
 USB Interface
It connects the KPN E60 HSDPA USB-Modem to a computer. USB .0 and USB .0 are
both supported.
 SIM/USIM Card Slot
It is where you insert the subscriber identity module/UMTS subscriber identity module
(SIM/USIM) card.
 Micro-SD Card Slot
It is where you insert the Micro Secure Digital Memory (Micro-SD) card
 External Antenna Jack
To this connector an (optional) external antenna can be connected to the KPN E60 HSDPA USB-Modem. (The
external antenna is an optional accessory).
 Strap Hole
It could connect your KPN E60 HSDPA-Modem to, for example, a key cord.
 Indicator LED
This multi-color-LED indicates the current status of the KPN E60 HSDPA USB-Modem, according to the table
below here.
LED indication Meaning; status of the USB-Modem
Off The USB-Modem is switched OFF, or problem with the USB-port of the PC
Green x blinking USB-Modem is ON, wait for action
Green x blinking Attached to GPRS or EDGE network, standby
Green Burning permanent Connection active via GPRS of EDGE network
Dark Blue blinking Attached to UMTS or HSDPA network, standby
Dark Blue Burning permanent Connection active via UMTS network
Light Blue (Cyan) Burning permanent Connection active via HSDPA network
1
3
4
5
2
6

4
Preparation
Requirements for the Computer
To use the KPN E60 HSDPA USB-Modem, the computer should meet the following requirements:
• USB Type A Receptacle, Compatible with USB . 0 High Speed.
• Operating System: Windows 000 SP4, Windows XP SP, Windows Vista.
• Apple Macintosh OS X 0.4 and 0.5 are also supported, but a separate Mac client needs to be downloaded
from http://www.kpn.com website.
• Your computer’s hardware system should meet or exceed the recommended system requirements for the
installed version of OS.
• Resolution for the display: 800 × 600 or higher.
Getting Your KPN E160 HSDPA USB-Modem Ready
• Remove the cover from the USB-connector
• Remove the USIM/SIM card-holder from the KPN E60 HSDPA USB-Modem.
• Insert the USIM/SIM card into the card slot holder, according to the drawing.
• Insert the card slot holder back into the KPN E60 HSDPA USB-Modem.
Inserting the Micro-SD Memory-card (Optional)
Insert the Micro-SD card into the KPN E60 HSDPA USB-Modem, as shown in the following gure.
Note: Do not remove the Micro-SD card when it is being used. Removing the card during an operation
may damage the Micro-SD card as well as the device, and data stored on the card may be corrupted.

5
Installation/Removal Guide
On different operating systems (OS’s), the installation and removal procedures may differ. Follow the system
prompts during operation.
Connecting the KPN E160 HSDPA USB-Modem with a Computer
Note: First, start up the computer. Then connect the KPN E160 HSDPA USB-Modem with the computer.
Otherwise, the KPN E160 HSDPA USB-Modem cannot be installed correctly.
• Plug the KPN E60 HSDPA USB-Modem into the USB interface of the laptop or desktop computer.
• You can connect the KPN E60 HSDPA USB-Modem to a laptop or desktop computer using the USB cable for
better signals.
• The OS automatically detects and recognizes new hardware and starts the installation wizard.
• Follow the prompts of the installation wizard.
• After the program is installed, a shortcut icon for the KPN E60 HSDPA USB-Modem management program
(KPN Mobile Connect Dashboard) is displayed on the desktop.
Starting the “KPN Mobile Connect” Management Program
After the KPN E60 HSDPA USB-Modem is installed, the KPN Mobile Connect management program is launched
automatically. Then every time the KPN E60 HSDPA USB-Modem is connected to the PC, the management
program is launched automatically.
You can also double-click the shortcut icon on the desktop to launch the management program.

6
Removing the KPN E160 HSDPA USB-Modem
• First close down the “KPN Mobile Connect” software management program (dashboard)
• Double-click on in the Windows Task-bar. The wizard “Safely remove Hardware” appears.
• Select and stop the hardware that refers to the KPN E60 HSDPA USB-Modem.
• When the message: “Hardware can be safely removed” appears, the KPN E60 HSDPA USB-Modem can be
removed from the system.
Removing the “KPN Mobile Connect” Management Program
• Click Start Menu.
• Click Control Panel.
• Click Add/Remove Program to remove the management program of the KPN E60 HSDPA USB-Modem.
Note: Before removing the management program, close down the management
program, and remove the USB-Modem from the computer.

7
Safety Information
Read the safety information carefully to ensure the correct and safe use of your wireless device.
Interference
Do not use your wireless device if using the device is prohibited or when it cause danger or interference with
electric devices.
Medical Device
• Do not use your wireless device and follow the rules and regulations set forth by the hospitals and health care
facilities.
• Some wireless devices may affect the performance of the hearing aids. For any such problems, consult your
service provider.
• If you are using an electronic medical device, consult the doctor or device manufacturer to conrm whether the
radio wave affects the operation of this device.
Area with Inammables and Explosives
To prevent explosions and res in areas that are stored with inammable and explosive devices, do not use your
wireless device and observe the rules. Areas stored with inammables and explosives include but are not limited
to the following:
• Gas station
• Fuel depot (such as the bunk below the deck of a ship)
• Container/Vehicle for storing or transporting fuels or chemical products
• Area where the air contains chemical substances and particles (such as granule, dust, or metal powder)
• Area indicated with the “Explosives” sign
• Area indicated with the “Power off bi-direction wireless equipment” sign
• Area where you are generally suggested to stop the engine of a vehicle
Trafc Security
• Observe local laws and regulations while using the wireless device. To prevent accidents, do not use your
wireless device while driving.
• RF signals may affect electronic systems of motor vehicles. For more information, consult the vehicle
manufacturer.
• In a motor vehicle, do not place the wireless device over the air bag or in the air bag deployment area.
Otherwise, the wireless device may hurt you owing to the strong force when the air bag inates.
• Observe the rules and regulations of airline companies. When boarding, switch off your wireless device.
Otherwise, the radio signal of the wireless device may interfere with the plane control signals.

8
Safety of Children
Do not allow children to use the wireless device without guidance. Small and sharp components of the wireless
device may cause danger to children or cause suffocation if children swallow the components.
Environment Protection
Observe the local regulations regarding the disposal of your packaging materials, used wireless device and
accessories, and promote their recycling.
WEEE Approval
The wireless device is in compliance with the essential requirements and other relevant provisions of the Waste
Electrical and Electronic Equipment Directive 00/96/EC (WEEE Directive).
RoHS Approval
The wireless device is in compliance with the restriction of the use of certain hazardous substances in electrical
and electronic equipment Directive 00/95/EC (RoHS Directive).
Laws and Regulations Observance
Observe laws and regulations when using your wireless device. Respect the privacy and legal rights of the others.
Care and Maintenance
It is normal that your wireless device gets hot when you use or charge it. Before you clean or maintain the wireless
device, stop all applications and disconnect the wireless device from your PC.
• Use your wireless device and accessories with care and in clean environment. Keep the wireless device from a
re or a lit cigarette.
• Protect your wireless device and accessories from water and vapor and keep them dry.
• Do not drop, throw or bend your wireless device.
• Clean your wireless device with a piece of damp and soft antistatic cloth. Do not use any chemical agents (such
as alcohol and benzene), chemical detergent, or powder to clean it.
• Do not leave your wireless device and accessories in a place with a considerably low or high temperature.
• Use only accessories of the wireless device approved by the manufacture. Contact the authorized service center
for any abnormity of the wireless device or accessories.
• Do not dismantle the wireless device or accessories. Otherwise, the wireless device and accessories are not
covered by the warranty.
Emergency Call
This wireless device functions through receiving and transmitting radio signals. Therefore, the connection cannot
be guaranteed in all conditions. In an emergency, you should not rely solely on the wireless device for essential
communications.

9
Specic Absorption Rate (SAR)
Your wireless device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio
waves recommended by international guidelines. These guidelines were developed by the independent scientic
organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age
and health.
The guidelines use a unit of measurement known as the Specic Absorption Rate, or SAR. The SAR limit for
wireless devices is .0 W/kg and the highest SAR value for this device when tested complied with this limit.
Body Worn Operation
Important safety information regarding radiofrequency radiation (RF) exposure
To ensure compliance with RF exposure guidelines the device must be used with a minimum of .5 cm separation
from the body.
Failure to observe these instructions could result in your RF exposure exceeding the relevant guideline limits.
Regulatory Information
The following approvals and notices apply in specic regions as noted.
CE Approval (European Union)
The wireless device is approved to be used in the member states of the EU. The wireless device is in compliance
with the essential requirements and other relevant provisions of the Radio and Telecommunications Terminal
Equipment Directive 999/5/EC (R&TTE Directive).
Federal Communications Commission Notice (United States): Before a wireless device model is available for
sale to the public, it must be tested and certied to the FCC that it does not exceed the limit established by the
government-adopted requirement for safe exposure.
The SAR limit adopted by the USA and Canada is .6 watts/kilogram (W/kg) averaged over one gram of tissue. The
highest SAR value reported to the FCC for this device type was compliant with this limit.
FCC Statement
This device complies with Part 5 of the FCC Rules. Operation is subject to the following two conditions: () this
device may not cause harmful interference, and () this device must accept any interference received, including
interference that may cause undesired operation.
* This device should be installed and operated with a minimum distance of 0 cm between the radiator and your
body when using it via USB cable.

0
Acronyms and Abbreviations
3G Third Generation Mobile Communication
EDGE Enhanced Data Rates for GSM Evolution
GPRS General Packet Radio Service
GSM Global System for Mobile Communications
HSDPA High Speed Downlink Packet Access
OS Operating System
PIN Personal Identication Number
SAR Specic Absorption Rate
SIM Subscriber Identity Module
UMTS Universal Mobile Telecommunications System
USB Universal Serial Bus
USIM UMTS Subscriber Identity Module
WCDMA Wideband Code Division Multiple Access
USIM UMTS Subscriber Identity Module
WCDMA Wideband Code Division Multiple Access