Kramer FC-49 User manual

KRAMER ELECTRONICS LTD.
USER MANUAL
MODEL:
FC-49
DVI / Audio to HDMI Converter
P/N: 2900-000286 Rev 6

FC-49 – Contents
i
Contents
1Introduction 1
2Getting Started 2
2.1 Achieving the Best Performance 2
2.2 Safety Instructions 2
2.3 Recycling Kramer Products 3
3Overview 4
3.1 Defining the FC-49 DVI / Audio to HDMI Converter 5
4Connecting the FC-49 DVI / Audio to HDMI Converter 6
5Acquiring an EDID 7
6Technical Specifications 8
7Default EDID 9
Figures
Figure 1: FC-49 DVI / Audio to HDMI Converter 5
Figure 2: Connecting the FC-49 DVI / Audio to HDMI Converter 6

FC-49 – Introduction
1
1 Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast range of
problems that confront the video, audio, presentation, and broadcasting
professional on a daily basis. In recent years, we have redesigned and upgraded
most of our line, making the best even better!
Our 1,000-plus different models now appear in 11 groups that are clearly defined by
function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Matrix
Switchers; GROUP 3: Control Systems; GROUP 4: Format/Standards Converters;
GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products;
GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and Connectors;
GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack Adapters and
GROUP 11: Sierra Products.
Congratulations on purchasing your Kramer TOOLS FC-49 DVI / Audio to HDMI
Converter, which is ideal for:
Home theater, presentation and multimedia applications
Rental and staging

2
FC-49 - Getting Started
2 Getting Started
We recommend that you:
Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
Review the contents of this user manual
Go to http://www.kramerelectronics.com/support/product_downloads.asp
to check for up-to-date user manuals, application programs, and to check if
firmware upgrades are available (where appropriate).
2.1 Achieving the Best Performance
To achieve the best performance:
Use only good quality connection cables (we recommend Kramer high-
performance, high-resolution cables) to avoid interference, deterioration in
signal quality due to poor matching, and elevated noise levels (often
associated with low quality cables)
Do not secure the cables in tight bundles or roll the slack into tight coils
Avoid interference from neighboring electrical appliances that may adversely
influence signal quality
Position your Kramer FC-49 away from moisture, excessive sunlight and
dust
This equipment is to be used only inside a building. It may only be
connected to other equipment that is installed inside a building.
2.2 Safety Instructions
Caution:
There are no operator serviceable parts inside the unit
Warning:
Use only the Kramer Electronics input power wall
adapter that is provided with the unit.
Warning:
Disconnect the power and unplug the unit from the wall
before installing
i
!
!

FC-49 – Getting Started
3
2.3 Recycling Kramer Products
The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims
to reduce the amount of WEEE sent for disposal to landfill or incineration by
requiring it to be collected and recycled. To comply with the WEEE Directive,
Kramer Electronics has made arrangements with the European Advanced
Recycling Network (EARN) and will cover any costs of treatment, recycling and
recovery of waste Kramer Electronics branded equipment on arrival at the EARN
facility. For details of Kramer’s recycling arrangements in your particular country go
to our recycling pages at http://www.kramerelectronics.com/support/recycling/.

4
FC-49 - Overview
3 Overview
The Kramer FC-49 DVI / Audio to HDMI Converter is a high−quality format
converter and embedder for DVI and audio signals. It converts a DVI signal and
embeds an unbalanced stereo, S/PDIF or TOSLINK® audio signal to an HDMI
output.
The FC-49 DVI / Audio to HDMI Converter features:
A maximum data rate up to 4.95Gbps (1.65Gbps per graphics channel)
HDCP compliance
HDTV compatibility
Auto Format Detection for digital RGB or YPbPr
A DVI−D input signal on a DVI−I connector
I-EDIDPro™ Kramer Intelligent EDID Processing™ - Intelligent EDID
handling and processing algorithm ensures Plug and Play operation for
HDMI systems
In addition, the FC-49 DVI / Audio to HDMI Converter:
Adds HDMI output capability to your DVI source so that, for example, an
HDMI television can be used with your DVI source (For example, the DVI
source can also be the DVI graphics output of a PC as well as its audio
signal) with sound
Includes automatic audio input detection. If a digital input (S/PDIF or
TOSLINK®) is detected, the FC-49 selects the digital input. If no digital input
is detected, the machine selects the analog input.
Note that S/PDIF and TOSLINK® inputs may not be connected
simultaneously
Supports a TOSLINK® sample rate of 44.1kHz and 48kHz
Is housed in a Kramer TOOLS™ enclosure. Three units can be rack
mounted side−by−side in a 1U rack space with the optional RK−3T rack
adapter

FC-49 – Overview
5
3.1 Defining the FC-49 DVI / Audio to HDMI Converter
Figure 1: FC-49 DVI / Audio to HDMI Converter
#
Feature
Function
1
12V DC
+12V DC connector for powering the unit
2
AUDIO
INPUTS
S/PDIF RCA Connector
Connects to the digital audio source
3
OPTICAL TosLink®
Connector
Connects to the digital audio source
4
ANALOG 3.5mm Mini
Jack
Connects to the analog audio source
5
DVI IN Connector
Connects to the DVI source
6
HDMI OUT Connector
Connects to the HDMI acceptor
7
OUT LED
Illuminates to indicate that a display is
connected
8
IN LED
Illuminates to indicate a signal at the input
9
ON LED
Illuminates when receiving power
10
EDID CAPTURE Button
Press and hold to acquire EDID
The audio inputs are automatically detected: if a digital input (S/PDIF or
TOSLINK®) is detected, the machine selects the digital input. If no
digital input is detected, the machine selects the analog input.
Note that S/PDIF and TOSLINK® inputs cannot be connected
simultaneously.
i

6
FC-49 - Connecting the FC-49 DVI / Audio to HDMI Converter
4 Connecting the FC-49 DVI / Audio to HDMI
Converter
Always switch off the power to each device before connecting it to your
FC-49. After connecting your FC-49, connect its power and then switch
on the power to each device.
To connect the FC-49, as illustrated in the example in Figure 2 do the following:
1. Connect the HDMI OUT connector to the HDMI acceptor (for example, an
LCD TV with built-in speakers).
2. Connect the DVI source, for example, a multimedia player (or a PC) to the:
DVI IN connector
S/PDIF (digital audio) RCA IN connector (or you can connect the audio
source to the ANALOG or OPTICAL audio connector)
Note: S/PDIF in the FC-49 supports stereo audio and not 5.1 channel
audio.
3. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity (not illustrated in Figure 2).
Figure 2: Connecting the FC-49 DVI / Audio to HDMI Converter
!
i

FC-49 – Acquiring an EDID
7
5 Acquiring an EDID
To acquire a new EDID, do the following:
1. Connect the power supply.
2. Connect the new output display (or keep it disconnected to acquire the
default EDID).
3. Press and hold the EDID CAPTURE button until the green IN LED starts
flashing, and then release the button.
The EDID is acquired after the IN LED stops flashing.