Kramer TP-43 User manual

Kramer Electronics, Ltd.
USER MANUAL
Model:
TP-43
Component – S/PDIF Transceiver

Contents
i
Contents
1 Introduction 1
2 Getting Started 1
3 Overview 1
3.1 Shielded Twisted Pair (STP) / Unshielded Twisted Pair (UTP) 2
3.2 About the TP-43 2
3.3 Recommendations for Achieving the Best Performance 3
4 Your TP-43 Component – S/PDIF Transceiver 3
4.1 Your TP-43 Component – S/PDIF Transceiver Topside 3
4.2 Your TP-43 Component – S/PDIF Transceiver Underside 5
5 Connecting the TP-43 Component – S/PDIF Transceiver 6
5.1 Connecting a TP-43 Component – S/PDIF Transceiver 6
5.2 Connecting an Extended Component – S/PDIF Distribution System 8
5.3 Wiring the CAT 5 LINE IN / LINE OUT RJ-45 Connectors 10
6 Technical Specifications 11
Figures
Figure 1: TP-43 Component – S/PDIF Transceiver 3
Figure 2: TP-43 Component – S/PDIF Transceiver Top Side 4
Figure 3: TP-43 Component – S/PDIF Transceiver Lower Side 4
Figure 4: TP-43 Component – S/PDIF Transceiver Underside 5
Figure 5: Connecting the TP-43 Component – S/PDIF Transceiver 7
Figure 6: Configuring an Extended Component – S/PDIF Distribution System 9
Figure 7: CAT 5 PINOUT 10
Tables
Table 1: TP-43 Component – S/PDIF Transceiver Features 4
Table 2: TP-43 Component – S/PDIF Transceiver Underside Features 5
Table 3: CAT 5 PINOUT 10
Table 4: Technical Specifications of the TP-43 11

Introduction
1
1 Introduction
Welcome to Kramer Electronics (since 1981): a world of unique, creative and
affordable solutions to the infinite range of problems that confront the video,
audio and presentation professional on a daily basis. In recent years, we have
redesigned and upgraded most of our line, making the best even better! Our
350-plus different models now appear in 8 Groups
1
, which are clearly defined
by function.
Congratulations on purchasing your Kramer TOOLS TP-43 Component –
S/PDIF Transceiver, which is designed to be used with the TP-41 Component
– S/PDIF transmitter and the TP-42 Component – S/PDIF receiver. The
TP-43 is also suitable for utilizing existing UTP cabling that results in an
efficient, fast and uncluttered environment for:
 High quality home cinema at multiple outputs
 Studios, airports, offices and hospitals
 Security and military applications
The package includes the following items:
 TP-43, a power supply
2
and this user manual
3
2 Getting Started
We recommend that you:
 Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
 Review the contents of this user manual
 Use Kramer high performance high resolution cables
4
3 Overview
This section describes:
 Using shielded twisted pair (STP)/unshielded twisted pair (UTP), see section 3.1
 A summary of the TP-43, see section 3.2
 Recommendations for achieving the best performance, see section 3.3
1 GROUP 1: Distribution Amplifiers; GROUP 2: Video and Audio Switchers, Matrix Switchers and Controllers; GROUP 3:
Video, Audio, VGA/XGA Processors; GROUP 4: Interfaces and Sync Processors; GROUP 5: Twisted Pair Interfaces;
GROUP 6: Accessories and Rack Adapters; GROUP 7: Scan Converters and Scalers; and GROUP 8: Cables and Connectors
2 The TP-43 does not have the power connect feature
3 Download up-to-date Kramer user manuals from the Internet at this URL: http://www.kramerelectronics.com
4 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Overview
2
3.1 Shielded Twisted Pair (STP) / Unshielded Twisted Pair (UTP)
The decision whether to use shielded twisted pair (STP) cable or unshielded
twisted pair (UTP) cable depends on the nature of the application.
It is recommended that in applications with high interference, shielded
twisted pair (STP) cable will give better results. However, the shield itself
does create a capacitance that degrades the frequency response of the
machines. For shorter distances, of 50m or so, shielded twisted pair (STP)
cable is preferred because it provides protection from interference
(degradation is non apparent).
For a long range application, unshielded twisted pair (UTP) cable is preferred.
However, the unshielded twisted pair (UTP) cable should be installed far away
from electric cables, motors etc., which are prone to create electrical interference.
Some Kramer twisted pair products include the Power Connect feature
1
. The
TP-43 does not have this feature.
3.2 About the TP-43
The TP-43 Component – S/PDIF Transceiver receives the CAT5 signal, decodes
it and simultaneously distributes it to the YUV and S/PDIF outputs, as well as
relaying the input to the next receiver (transceiver operation). In particular, the
TP-43 Component – S/PDIF Transceiver features:
 A YUV
2
output on 3 RCA connectors
 A digital audio output (S/PDIF) on an RCA connector
 A CAT5 input and output on RJ-45 connectors
 Individual level and EQ. controls for the Y, U, and V signals, as well as
audio level and EQ. controls
The TP-43 Component – S/PDIF Transceiver is designed to be used with the
TP-41 and the TP-42. When using three TP-43 units between the TP-41 /
TP-42 pair, the maximum range of the system via UTP cabling can be
extended to up to 1200ft (400m).
Kramer twisted pair adapters are an excellent way to solve remote monitoring
requirements without using more costly coaxial cable or fiber, or wireless
transmission systems.
1 The Power Connect feature lets you power a transmitter / receiver system by connecting just one power adapter to either the
transmitter or the receiver. The other unit is fed over the same CAT5 cable. The Power Connect feature applies as long as the
CAT5 cable is heavy gauge cable (that is, it can carry power). The distance does not exceed 50 meters on standard cable. For
a distance of 100 meters, separate power supplies must be connected to the transmitter and to the receiver simultaneously,
unless using heavy gauge CAT5 cable
2 Also known as Y, B-Y, R-Y, or Y, Pb, Pr

Your TP-43 Component – S/PDIF Transceiver
3
3.3 Recommendations for Achieving the Best Performance
Achieving the best performance means:
 Connecting only good quality connection cables, thus avoiding
interference, deterioration in signal quality due to poor matching, and elevated
noise levels (often associated with low quality cables)
 Avoiding interference from neighboring electrical appliances that may
adversely influence signal quality, and positioning your TP-43 away from
moisture, excessive sunlight and dust
4 Your TP-43 Component – S/PDIF Transceiver
For a description of the TP-43 Component – S/PDIF Transceiver:
 Topside, see section 4.1
 Underside, see section 4.2
4.1 Your TP-43 Component – S/PDIF Transceiver Topside
Figure 1, Figure 2, Figure 3, and Table 1 define the topside of the TP-43:
Figure 1: TP-43 Component – S/PDIF Transceiver

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your TP-43 Component – S/PDIF Transceiver
4
Figure 2: TP-43 Component – S/PDIF Transceiver Top Side
Figure 3: TP-43 Component – S/PDIF Transceiver Lower Side
Table 1: TP-43 Component – S/PDIF Transceiver Features
# Feature Function
1 12V DC +12V DC connector for powering the unit
2 LINE OUT RJ-45 Connector Connects to the LINE IN connector on the TP-42
1
3 S/PDIF RCA Connector Connects to the digital audio acceptor
4 VRCA Connector
5 URCA Connector
6
OUTPUTS
YRCA Connector
Connects to the component video acceptor
7 LINE IN RJ-45 Connector Connects to the LINE OUT connector on the TP-41
1
8 ON LED Illuminates when receiving power
1 Using a straight pin to pin UTP or STP cable with RJ-45 connectors at both ends (the PINOUT is defined in Table 3 and Figure 7)

Your TP-43 Component – S/PDIF Transceiver
5
4.2 Your TP-43 Component – S/PDIF Transceiver Underside
Figure 4 and Table 2 define the underside of the TP-43:
Figure 4: TP-43 Component – S/PDIF Transceiver Underside
Table 2: TP-43 Component – S/PDIF Transceiver Underside Features
# Feature Function
1 Y Trimmer Adjusts
1
the Y output signal level
2 U Trimmer Adjusts
1
the U output signal level
3
LEVEL
V Trimmer Adjusts
1
the V output signal level
4 Y Trimmer Adjusts
1
the cable compensation equalization level for output Y
5 U Trimmer Adjusts
1
the cable compensation equalization level for output U
6
COMPONENT
EQ.
V Trimmer Adjusts
1
the cable compensation equalization level for output V
7 LEVEL Adjusts
1
the digital audio signal level
8
LOCAL OUTPUT
S/PDIF
EQ. Adjusts
1
the digital audio output cable compensation equalization level
9 V Trimmer Adjusts
1
the V line output signal level
10
U Trimmer Adjusts
1
the U line output signal level
11
Y Trimmer Adjusts
1
the Y line output signal level
12
LINE
OUTPUT
LEVELS
S/PDIF Trimmer Adjusts
1
the S/PDIF digital audio line output signal level
1 Insert a screwdriver into the small hole and carefully rotate it, trimming the level

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the TP-43 Component – S/PDIF Transceiver
6
5 Connecting the TP-43 Component – S/PDIF Transceiver
This section describes how to connect:
 The TP-43, see section 4.1
 An extended Component – S/PDIF distribution system by connecting three
TP-43 units between the TP-41 and the TP-42, see section 4.2
5.1 Connecting a TP-43 Component – S/PDIF Transceiver
To configure a TP-43 Component – S/PDIF Transceiver, as the example in
Figure 5 illustrates, do the following:
1. Connect the:
 Y, U, and V RCA (component video) OUTPUT connectors to a
component acceptor (for example, a plasma display)
 S/PDIF (digital audio) RCA OUTPUT connector to an AV Receiver
2. Connect the LINE IN connector of the TP-43 to the LINE OUT connector
of the TP-41, via UTP cabling (maximum range of 300ft (100m)).
3. Connect the LINE OUT connector of the TP-43 to the LINE IN connector
of the TP-42, via UTP cabling (maximum range of 300ft (100m)).
4. Connect a 12V DC power adapter to the power socket and connect the
adapter to the mains electricity (not shown in Figure 5).
5. If necessary, adjust
1
the appropriate level(s) of the TP-43, the:
 Local output: Y, U and V signal levels, Y, U and V compensation
equalization levels, and the digital audio S/PDIF level and compensation
equalization level
 Line output: Y, U and V signal levels, and the digital audio S/PDIF level
1 Insert a screwdriver into the small hole and carefully rotate it, trimming the level

Connecting the TP-43 Component – S/PDIF Transceiver
7
Figure 5: Connecting the TP-43 Component – S/PDIF Transceiver

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the TP-43 Component – S/PDIF Transceiver
8
5.2 Connecting an Extended Component – S/PDIF Distribution System
To configure a TP-41 / TP-42 / TP-43 extended Component – S/PDIF
distribution system (up to 1200ft (400m)), as the example in Figure 6 illustrates:
1. On the TP-41, connect the:
 Y, U, and V RCA INPUT connectors and the S/PDIF (digital audio) RCA
INPUT connector to a component source (for example, a DVD player)
 LINE OUT connector
1
to the LINE IN connector
1
of the first TP-43
2. On the first TP-43, connect the:
 Local Output A: Y, U, and V RCA (component video) OUTPUT
connectors to a component acceptor (for example, a plasma display), and the
S/PDIF (digital audio) RCA OUTPUT connector to an AV Receiver
 LINE OUT connector
1
to the LINE IN connector
1
of the second TP-43
3. On the second TP-43, connect the:
 Local Output B: Y, U, and V RCA (component video) OUTPUT
connectors to a component acceptor (for example, a plasma display), and the
S/PDIF (digital audio) RCA OUTPUT connector to an AV Receiver
 LINE OUT connector
1
to the LINE IN connector
1
of the third TP-43
4. On the third TP-43, connect the:
 Local Output C: Y, U, and V RCA (component video) OUTPUT
connectors to a component acceptor (for example, a plasma display), and the
S/PDIF (digital audio) RCA OUTPUT connector to an AV Receiver
 LINE OUT connector
1
to the LINE IN connector
1
of the TP-42
5. On the TP-42, connect the:
 Y, U, and V RCA (component video) OUTPUT connectors to a
component acceptor (for example, a plasma display), and the S/PDIF (digital
audio) RCA OUTPUT connector to an AV Receiver
6. On each unit, connect a 12V DC power adapter to the power socket and
connect the adapter to the mains electricity (not shown in Figure 6).
7. If necessary, adjust
2
the appropriate level(s) on the TP-41
3
, the TP-42
4
and on each of the three TP-43 units
5
.
1 Via CAT5 cabling with a maximum range of up to 300ft (100m)
2 Insert a screwdriver into the small hole and carefully rotate it, trimming the level
3 That is, the audio level and the Y, U, and V levels
4 That is, the audio level, the audio EQ., the Y, U, and V levels, and the Y, U, and V EQ.
5 That is, the local output: Y, U and V signal levels / compensation equalization levels, and the digital audio S/PDIF level and
compensation equalization level, as well as the line output: Y, U and V signal levels, and the digital audio S/PDIF level