Kraus Oletto FF-103 User manual

Oletto™ Single Handle Water
Filtration Faucet
FF-103
INSTALLATION GUIDE
www.kraususa.com I Toll Free: 1.800.775.0703 I © 2022 Kraus USA Plumbing LLC I REV. SEPT 07, 2022

Congratulations on the purchase of your new
Please keep the box and packaging materials until your product is
completely installed. If you have any questions, require technical
assistance, or have any problems with your product:
Please contact our Customer Service Team
1-800-775-0703 / [e-mail]
Have the model number available, and retain a copy of your receipt
with purchase date for reference.
If for any reason this product does not meet your expectations,
please be sure to repack this product in the original box and
packaging material to avoid damage during transit.
DO NOT RETURN TO STORE
1

Prior to Installation:
•Make sure you have all necessary parts by checking the diagram and parts list. If
any part is missing or damaged, please contact Kraus Customer Service at 800-775-
0703 for a replacement
•
•Pre-drilled countertop hole size requirement: 1 1/4”(min)
•Max countertop thickness: 3”
Tools you will need:
Adjustable Wrench Phillips Screwdriver Safety Goggles
Silicone Sealant
(optional)
Supply Lines
2
to release any built-up pressure
STOP
Care & Maintenance
* To keep the product clean & shining, follow the steps below:
1. Rinse with clean water & dry with a soft cloth
2. Do not clean with soaps, acid, polish, abrasives or harsh cleaners
3. Do not use cloth with a coarse surface
4. Unscrew the aerator and clean when necessary
* This installation manual is subject to change without further notice.
ACID

3
Diagram and Parts List
A. Faucet Assembly
C. Metal Washer
D. Mounting Nut
E. 3/8 in. Connector
F. 1/4 in. Connector
G. Hex Wrench
B. Rubber Washer
G
A
B
D
E
C
F

4
Faucet Dimension
Installer Tip:
12 7/8”
[328.5mm]
2 3/4”
[69.5mm]
7/16-24UNS-2A
9 1/4”
[236.0mm]
6”
[153.0mm]
7 1/8”
[181.0mm]
Ø 1 3/4”
[Ø44.0mm]
MAX 3”
[76.2mm]

Step 1: Preparing for installation
Remove the rubber washer (B), metal
washer (C), and mounting nut (D) from the
end of the stud.
5
Step 2: Installing the faucet assembly
Place the faucet assembly (A) through the
selected hole in the sink or countertop.
On the underside of the sink or countertop,
slide the rubber washer (B) and metal
washer (C) onto the stud.
Thread the mounting nut (D) onto the stud,
and tighten securely using your wrench.
C
D
B
A
C
D
B

6
Step 3: Connecting the quick connect adaptor and water line
Thread the quick connect adaptor (E) onto the
end of the faucet assembly (A) stud, and tighten
securely using a wrench.
Connect the 3/8 in. water line from the filtration
system by pushing the line into the connector (E).
Pull down on the 3/8 in. line slightly to ensure
the quick connect fitting has engaged.
E
3/8 in. Water line from
filtration system
A

7
Replacement Parts
1. O-ring
Replacement Parts List Part #
3. Locking Ring
4. O-ring
6. Handle
8. Rubber Washer
9. Metal Washer
10. Mounting Nut
Finish / Color
KP27406
KP27175
KP27176
KP27177
KP27168
KP27170
KP27171
5. Cartridge
CH, SFS, MB, BG,
BB, SFACB, SFSB*
KP27172
11. 3/8 in. Connector KP27178
12. 1/4 in. Connector KP27266
13. Hex Wrench KP27020
*Denotes faucet component color options:
CH - Polished Chrome
SFS - Spot Free Stainless Steel
MB - Matte Black
BG - Brushed Gold
BB - Brushed Brass
SFACB - Spot Free Antique Champagne Bronze
SFSB - Spot Free Black Stainless
SFSMB - Spot Free Stainless Steel/Matte Black
BBMB - Brushed Brass/Matte Black
2. Spout Nut KP27405
CH, SFS, MB, BG,
BB, SFACB, SFSB*
7. Index KP27194
GR, BL*
GR - Grey
BL - Black
1
2
3
13
4
5
6
7
8
9
10
11
12

8
Troubleshooting
If you have followed the instructions carefully and your faucet still does not work
properly, take the following coorective steps:
P R O B L E M C A U S E A C T I O N
Leakage under the
handle.
Cartridge (5) has come
loose.
Remove index (7) and loosen
set screw with hex
wrench (13). Remove the
handle. Tighten cartridge
(5) with a adjustable wrench.
completely.
Cartridge may need to
be adjusted or replaced.
Remove index (7) and loosen
set screw with hex
wrench (13). Remove the
handle . Tighten cartridge
(5) with a adjustable wrench.
Remove the cartridge (5).
Check for cracks.

9
Faucet - Lifetime Limited Warranty
Kraus USA Plumbing, LLC (“Kraus”) extends this warranty to the original purchaser for personal household use of the
Faucet when purchased from an authorized Kraus dealer and in the location of original installation. This warranty is
non-transferable.
Kraus warrants the structure and finish of the Faucet to be free from defects in material and workmanship under normal
usage for as long as the original purchaser resides in the residence in which the Faucet was first installed.
Kraus warrants the Faucet's sprayhead assembly (including the engine, aerators, structure, restrictors, back flow
preventers, sprayer hoses, braided supply line hoses which encompasses nylon, silicon and stainless steel) of the product
to be free from defects in material and workmanship under normal usage for a period of one (1) year from the date of
purchase.
Kraus warrants the Faucet's cartridge to be free from defects in material and workmanship under normal usage for a
period of five (5) years from the date of purchase.
Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired
or replaced with a product of equal value at the option of Kraus.
Commercial Warranty
Kraus USA Plumbing, LLC (“Kraus”) warrants its Products for a period of one (1) year to commercial purchasers of
Products used in industrial, commercial and business applications.
Care and Cleaning Instructions
Certain cleaning products may cause damage to a Product's finish and use of the following on the Product will void this
warranty:
Abrasive cleaners such as powders, bleach, ammonia, alcohol or chorine
Abrasive pads, steel wool or wire brushes
What is Not Covered
This warranty does not cover Products that were discontinued when purchased or display Products, whether such
Products were purchased at discount outlets, unauthorized dealers, and/or sold on clearance. This warranty does not
cover any free gifts included with purchase.
This warranty does not cover damage resulting from neglect, misuse (including use for an unintended application),
abuse, carelessness, accident, hard water or mineral deposits, exposure to corrosive materials, improper maintenance,
alteration of the Product, or failure to follow care, cleaning or installation instructions enclosed with your Product. Kraus
recommends that all Kraus Products be installed by a fully licensed and insured trade professional with experience in the
installation of bathroom and/or kitchen manufactured goods.
Codes/Standards Applicable:
UPC
CR
NSF/ANSI 372
ASME A112.18.1
1GPM 3.8L/min maximum
IP
TM
LEAD FREE
NSF/ANSI 61
A
MOR&T
R
•
•
UPC
CR
NSF/ANSI/CAN 61: Q ≤ 1