Kraus Oren KPF-2252 User manual

www.kraususa.com I Toll Free: 1.800.775.0703 I © 2018 Kraus USA Inc. I REV. January 9, 2020
OrenTM Single Handle
Kitchen Faucet
KPF-2252
R
INSTALLATION MANUAL

2
Congratulations on the purchase of your new
Kraus plumbing fixture!
Please keep the box and packaging materials until your product is
completely installed. If you have any questions, require technical
assistance or have any problems with your product:
Please contact our Customer Service Team
1-800-775-0703 / [email protected]
Have the model number available and retain a copy of your
receipt with purchase date for reference.
If for any reason this product does not meet your expectations,
please be sure to repack this product in the original box and
packaging material to avoid damage during transit.
DO NOT RETURN TO STORE
STOP

Prior to Installation:
·Make sure you have all necessary parts by checking the diagram and
parts list. If any part is missing or damaged, please contact Kraus
Customer Service at 800-775-0703 for a replacement.
·Turn off the hot and cold water supply at the angle stops and turn on
the old faucet to release any built up pressure. Remove existing faucet.
Clean sink or countertop to remove any debris, plumber’s putty, or
silicone.
·Flush angle stops to release any debris prior to installation.
·Pre-drilled hole size requirement: 1 3/8" (min) - 1 1/2" (max)
·Max countertop thickness: 1 3/8”
·1, 2 or 3 hole installation
3
Tools Required
Adjustable Wrench Phillips Screwdriver Silicone Sealant Safety Goggles
For technical assistance or replacement parts, please contact Kraus
Customer Service and one of our representatives will be happy to help:
Toll-Free: 800-775-0703 or [email protected]

44
Diagram and Parts List
1
2
6
8
7
1. Spray Head
2. Faucet Body
3. Mounting Hardware
A. Rubber &
Metal Washer
B. Mounting Nut
C. Mounting Screws
4. Quick Connector
5. Hot & Cold
Waterlines
3A
3B
3C
4
5
6. Spray hose
7. Weight
8. Hex Wrench

55
Faucet Dimensions
Installer Tip:
Shut off main water supply before installing new faucet.
10 1/4”
262mm
8 1/8”
207mm
2 1/4”
58mm 2 1/4”
58mm
1 3/8” ~1 1/2”
35~38mm
3/8" Compression
1 3/8”
9 1/4”
233mm
Max35mm
6 1/4” 159mm
22 1/2”
570mm

66
Step 1A. Faucet installation - with deck plate
Step 1B. Faucet installation - without deck plate
For three-hole installation:
Deck plate, base plate
(see below), and silicone
sealant (optional) are
required.
Note: optional deck plate
not included
For single-hole installation:
Deck plate, base plate and
silicone sealant are NOT
required.

7
Step 2. Install faucet and mounting hardware
Insert faucet body (2) into
hole in countertop or deck
plate assembly. Install
mounting hardware (3A, B
&C) from underneath the
countertop.
Step 3. Secure mounting hardware
Adjust direction of faucet
body (2) so that the faucet is
facing straight.Tighten
mounting nut (3B) until snug.
Tighten mounting screws
(3C) to nut with a Phillips
screwdriver until snug.
3A
3B
3C
3C
3B
NOTE: The white dot on the
base of the faucet should be
facing forward.

8
Step 4. Attach spray hose and counterweight
Step 5. Connect waterlines
Connect spray hose (6)
to quick connector (4)
attached to supply line.
Install weight (7) on lowest
vertical point on spray
hose (6).
Connect waterlines (5) to
angle stops. Tighten both
ends of waterlines with a
wrench until snug. Turn on
hot and cold angle stops
and check for leaks.
4
6
7

9
Step 6. Flush spray hose
Remove spray head (1) from
spray hose (6). Hold tip of spray
hose (6). Turn faucet on and let
the water run for 60 seconds to
flush any debris.
Step 7. Check for leaks
Check for leaks at the
connections. Retighten if
necessary.
1
6

10
Replacement Parts
4
5
6
12
9
7
7
10
11
17
8
1
2
3
15
14
1. Metal Handle
2. Set Screw
3. Handle Button
4. Cartridge Cover
5. Locking Nut
6. Cartridge
7. Spray Hose
8. Hose Guide
9. Spray Head
10. Check Valve
11. Quick Connector
12. Rubber Washer
13. Metal Washer
14. Mounting Nut
15. Mounting Screws
16. Protective Sleeve
17. Hot & Cold Waterlines
18. Weight
19. Hex Wrench
20. Mounting Hardware Kit
(includes KP06041,
KP06028,KP06067,
KP06068)
Replacement Parts List Finish/Color Part #
KP06002
KP06055
KP06030
KP06020
KP06018
KP06100
KP06097
KP06045
KP06090
KP06104
KP06108
KP06041
KP06028
KP06067
KP06068
KP06057
KP06095
KP06015
KP06050
KP06200
CH,SFS,MB*
*Denotes faucet component color options:
SFS - Spot Free Stainless Steel
MB - Matte Black
CH - Chrome
CH,SFS,MB*
CH,SFS,MB*
CH,SFS,MB*
CH,SFS,MB*
16
14
15
12
13