Kusam-meco KM 3060 User manual

G-17, Bharat Industrial Estate, T. J. Road, Sewree (W), Mumbai - 400 015. INDIA.
Sales Direct.: 022-24156638, Tel. : [phone], Fax : [phone]
Email : [email protected], Website : www.kusamelectrical.com
All Specifications are subject to change without prior notice
GENERAL SPECIFICATIONS :
AC Current : 0.01A ~ 1000A
AC Voltage : 1V ~ 750V
DC Voltage : 1V ~ 1000V
Resistance : 0.1W ~ 2MW
Frequency : 1Hz ~
rate : 3 reading/sec.
Polarity : Automatic.
Power Supply : 9V Alkaline Battery.
Dimension : 228(L) x 75(W) x 36(H)mm
Weight : approx 465 gms.(including battery).
í
í
í
í
í
í
í
í
í
2KHz
í Sampling
Test leads set, Users Manual, Battery &
Carrying Case.
Preliminary Data
— Display : 3 ½ digits LCD,1999 counts
● Jaw size : Φ40mm
● Date hold
● Black Light
● Resistance, Frequency test
● Diode & Continuity test
SPECIAL FEATURES :
®
An ISO 9001:2008 Company
MODEL KM 3060
ACCESSORIES :
®
An ISO 9001:2008 Company
Chhaya com/D/chhaya/my documents/chhaya/backup/catlog/New catlog/2015 new arrival catalogs/KM 3060.cdr
1000A AC DIGITAL CLAMPMETER
ELECTRICAL SPECIFICATIONS : KM 3060
AC CURRENT
Range
Overload Protection : 1200A within 60 seconds.
20 A
200 A
50Hz ~ 60Hz
1000 A
Accuracy
Resolution
± (3%rdg + 5dgts)
0.01 mA
± (2%rdg + 5dgts)
0.1 mA
± (2%rdg + 5dgts)
for 800A & below
± (3%rdg + 5dgts)
for others current.
1 A
AC VOLTAGE
Range
Overload Protection : 750V AC / DC on all ranges.
Input Impedance : 9MW
750 V
50Hz ~ 60Hz
Accuracy
Resolution
± (1.2%rdg + 10dgts)
1 V
DC VOLTAGE
Range
Overload Protection : 1000V DC / Peak AC on all ranges.
Input Impedance : 9MW
Accuracy
Resolution
1000 V ± (1%rdg + 1dgts)
1 V
RESISTANCE
Range
Overload Protection : 250V DC / rms AC on all ranges.
Accuracy
Resolution
200 W± (1.2%rdg + 5dgts)
0.1 W
2 KW
± (1%rdg + 5dgts)
0.001 KW
20 KW0.01 KW
2 MW0.001 MW
CONTINUITY TEST
Range
Overload Protection : 500V DC / rms AC
200 W
Buzzer Sound With resistance less than 50W
DIODE TEST
Test Current
Overload Protection : 500V DC / rms AC
Application : Display reading approx. Diode forward voltage value.
< 1.2mA
Open Circuit Voltage £ 3.2V
Relative Humidity max. 80%
FREQUENCY
Range Accuracy
1Hz ~ 2KHz ± (2.0% rdg + 5 dgts)

®
®®
AN ISO 9001:2015 COMPANY
MODEL - KM 3060
OPERATION MANUAL
DIGITAL CLAMP MULTIMETER
®
G 17, Bharat Industrial Estate, T. J. Road,
Sewree (W), Mumbai - 400 015. INDIA.
Sales Direct : [phone]
Tel. : [phone]. Fax : [phone]
Email : [email protected]
Website : www.kusamelectrical.com
®
LIST OF PRODUCTS
¬ Digital Multimeter ¬ Digital AC & AC/DC Clampmeter
¬ AC Clamp Adaptor ¬ AC/DC Current Adaptor
¬ Thermo Anemometer ¬ Thermo Hygrometer
¬ Distance Meter ¬ Digital Lux Meter
¬ Network Cable Tester ¬ Power Factor Regulator
¬ Earth Resistance Tester ¬ Digital Panel Meters
¬ DC Power Supplies ¬ High Voltage Detector
¬ Calibrators ¬ Gas Analysers
¬ Frequency Counter ¬ Function Generator
¬ Phasing Sticks ¬ Battery Tester
¬ Waterproof Pen Testers ¬ Solar Power Meter
¬ EMF Detector
¬ Wood, Paper & Grain Moisture Meter
¬ Transistorised Electronic Analog & Digital Insulation
Resistance Testers(upto 10 KV)
¬ Digital Sound Level Meter & Sound Level Calibrator
¬ Digital contact & Non-contact Type Tachometer
¬ Digital Non-contact (infrared) Thermometer
¬ Maximum Demand Controller/Digital Power Meter
¬ Digital Hand Held Temperature Indicators

® ®
09
WARRANTY
Each “KUSAM-MECO” product is warranted to be free from defects in
material and workmanship under normal use & service. The warranty
period is one year (12 months) and begins from the date of despatch of
goods. In case any defect occurs in functioning of the instrument,
under proper use, within the warranty period, the same will be rectified
by us free of charges, provided the to and fro freight charges are borne
by you.
This warranty extends only to the original buyer or end-user customer
of a “KUSAM-MECO” authorized dealer.
This warranty does not apply for damaged Ic’s, fuses, burnt PCB's,
disposable batteries, carrying case, test leads, or to any product which
in “KUSAM-MECO’s” opinion, has been misused, altered, neglected,
contaminated or damaged by accident or abnormal conditions of
operation or handling.
“KUSAM-MECO” authorized dealer shall extend this warranty on new
and unused products to end-user customers only but have no authority
to extend a greater or different warranty on behalf of “KUSAM-MECO”.
“KUSAM-MECO’s” warranty obligation is limited, at option, free of
charge repair, or replacement of a defective product which is returned
to a “KUSAM-MECO” authorized service center within the warranty
period.
THIS WARRANTY IS BUYER’S SOLE AND EXCLUSIVE REMEDY
AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. “KUSAM-MECO” SHALL NOT BE LIABLE
FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL
DAMAGES OR LOSSES, INCLUDING LOSS OF DATA, ARISING
FROM ANY CAUSE WHATSOEVER.
All transaction are subject to Mumbai Jurisdiction.

®
01
1. OPERATING FEATURES:
· AC Current0.01A to 1000A
· AC Voltage1V to 750V
· DC Voltage1V to 1000V
· Resistance0.1n to 2Mfl
· Continuity Test50c2±2552 with audio tone
· Diode TestSemiconductor PN junction
· Frequency1Hz-2KHz
° ° ° °
Calibration temperature of 18 C to 28 C (64 F to 82 F) at
relative humidity under 80%, unless otherwise noted.
2.1 AC Current
20A 10mA ±(3% of reading + 5 d)
200A 100mA ±(2% of reading + 5 d)
1000A 1A ±(2% of reading + 5 d)
for 800A and below
±(3% of reading + 5 d)
for others current.
Overload Protection 1200A within 60 seconds.
Jaw opening 2" (5cm)
Instruction Manual
This meter is completely portable, LCD, 31/2 digit clamp meter.
Designed for use by electricians, technicians, serviceman. It's
rugged structure design is good feeling to hold in operator's
hand and convenient to use.
®
08
TEST CERTIFICATE
This Test Certificate warrantees that the product has been
inspected and tested in accordance with the published
specifications.
The instrument has been calibrated by using equipment
which has already been calibrated to standards traceable
to national standards.
MODEL NO. ________________
KM - 3060
SERIAL NO. ___________
DATE: ___________
ISO 9001
REGISTERED
QC
PASS
KUSAM-MECO
DIGITAL CLAMP MULTIMETER

®
02
Range Resolution Accuracy (50Hz-60Hz)
2.2 AC Voltage
750 V 1V ±(1.2% of reading + 10 d)
Input impedance :
Overload Protection :
9MW
750V AC/DC on all ranges.
2.3 DC Voltage
Range
Range
Resolution Accuracy (50Hz-60Hz)
Accuracy (50Hz-60Hz)
Input impedance :
Overload Protection :
Overload Protection :
9MW
1000V DC/peak AC on
all ranges.
1000V 1V ±(1% of reading+ 1 d)
2.4 Resistance
200W±(1.2% of reading + 5 d)
2K0,20K0,2M0 ±(1% of reading + 5 d)
250VDC/rmsAC on all ranges
2.5 Continuity Test
200W
Buzzer sound With resistance less than 50W
Overload Protection 500V DC/rms AC
Range
®
07
3.4 Resistance and Continuity Measurements
3.4.1 Set the Function/Range switch to the resistance range or continuity
position.
3.4.2 Turn off the power from the circuit under test.
3.4.3 Connect the red test lead to the "VGA" jack and the black test lead to the
"COM" jack.
3.4.4 Touch the probes to the test points In ohms, the value indicated in the
display is the measured value of resistance. In continuity test, the beeper
sounds continuously, if the resistance is less than 50G.
3.5 FREQUENCY Measurement
3.5.1 Connect the red test lead to the "VG" jack and the black test lead to the
"COM" jack.
3.5.2 Set the switch to Hz range and connect the test leads to the frequency
source to get the frequency value.
4. Battery Replacement
—
A 9-volt "transistor" batterr TEDA1604, IEC 6F22) is the
supply power. The " " appears on the LCD display when
replacement is needed. Open the meter and lift off the front
case. Then,remove the battery from battery contacts and
replace with a new one

®
03
2.6 Diode Test
Test current < 1.2mA
Open circuit voltage < 3.2V
Overload Protection 500V DC/rms AC
Application Display reading approx.
Diode forward voltage value
Relative Humidity max. 80%
2.7 FREQUENCY
Range Accuracy
1Hz-2KHz ±(2.0%rdg+5d)
2.8 Function Characteristics
Measurement method Dual slope integration technical
Reading Rate 3 reading/Sec.
Polarity Automatic, indicated minus
assumed plus.
Overload indication Blanking of all digits. Except
MSD. decimal point and
sign.appropriate
Power requirements 9V Battery
Battery life Up to 200 hours typical with
Alkaline Up to 150 hours typical
with Zinc carbon
Display LCD 31/2 digit (1999 count)
0.5" high
®
06
3.1 DC/AC VOLTAGE MEASUREMENT
3.1.1 Connect red test lead to "+' ;Black test lead to "COW.
3.1.2 Set RANGE switch to ACV or DCV desired position.
3.1.3 Connect test leads to device or circuit being tested.
3.1.4 Read voltage value on Digital Display.
3.2 AC Current Measurement
3.2.1 Set Function/Range Switch to the ACA 1000A range,
if the display indicates one or more leading zeros, shift to the
200A or 20A range to improve the resolution of the
measurements.
3.2.3 Press the trigger to open the transformer jaws and
clamp one conductor only. It is impossible to make
measurements when two or three conductors(wires) are
clamped at the same time.
3.2.4 Display reading is the AC current flowing through the
conductor
3.2.5 Press the trigger to open the transformer jaws and
remove clamp meter from the conductor.
3.3 Diode Tests
3.3.1 Connect the red test lead to the "VG" jack and the
black test lead to the "COM" jack.
3.3.2 Set Function /Range Switch to the diode test position.
3.3.3 Turn off power to the circuit under test.
3.3.4 Read the forward voltage value on digital display.
3.3.5 Reverse probes. If the diode is good. "1" is displayed.
If the diode is shorted, ".000" or another number is displayed.
3.3.6 If the diode is open circuit, "1" will be displayed in both
directions of the diode.

®
04
All function and Ranges with
this feature.
Data hold
Dimension 228(L)X75(W)X36(H)mm
Weight 465gr.aprox.(batteryincluded)
2.9 Accessories
Instruction manual Test leads
9V battery Carrying Case
3. Operating And Recalibration:
1. Transformer jaws
Pick up the AC current flowing through the conductor.
2. Trigger
Press the level to open the transformer jaw. When the finger
press on the level is released the jaws will close again.
3. Display
372 digit (1999). decimal point, minus polarity, over-range
and LO BAT indicators.
4. Data Hold Switch
A push switch, (Push ON, Push OFF, do not pull to select
function). Push ON to hold the measured value and store the
value in memory_ Push OFF to release hold function.
A rotary switch is used to select measurement Function and
Range switch.
5. Rotary Switch
®
05
6. "+ " connector
High input terminal for voltage, resistance, continuity,
measurement. Accept banana plugs.
7. "COM " input connector
Low input terminal for voltage, resistance, continuity,
measurement. Accept banana plugs.
8. Back light Switch
A push switch, (Push ON, Push OFF, do not pull to select
function). A Push ON, the back light will be on. Another
Push OFF, the back light wilt be off.