Kustom Signals Eagle 3 North Carolina User manual

S1
- Press to enter Menus. In Menus, pressing
increments Menu screens.
S2
- Initiates the display, internal and tuning fork
tests. In
Menus, pressing will save selection and
return
to Main Enforcement screen.
S3
- Programmable soft key for shortcut to
favorite
menu. Toggles Patrol Speed Blanking
with
a locked target and antennas in hold.
S4
- Control for power on / off.
Power off to save
current menu selections.
Eagle 3 Quick Reference Guide
North Carolina Edition
1 Eagle 3 Front Panel Controls
www.kustomsignals.com
Sales (800) 4KUSTOM [phone]
Customer Service [phone]
Eagle 3 Quick Reference Guide
KSI Part # 006-1003-11 Rev 2
4Eagle 3 Tuning Fork Test
Stationary Tuning Fork Test
1. Place the Eagle 3 in stationary mode, select Front antenna.
2. Press the Test button or touch screen lower right.
3. Lightly strike the low fork (30 mph) and place in front of the
antenna. Verify the speed displayed is ±1 mph.
4. Repeat for the high fork and rear antenna (if equipped.)
Moving Mode Tuning Fork Tests
1. Place in the Moving Opposite mode, select Front antenna.
2. Press the Test button or touch screen lower right.
3. Lightly strike the low fork (30 mph) and place in front of the
antenna. Verify the Patrol speed displayed is ±1 mph.
4. While holding the lower speed fork in front of the antenna,
lightly strike the high fork (55 mph) and place in front of the
antenna. Verify the Target speed displayed is the difference
between forks (25 mph) with a tolerance of ±1 mph.
5. Repeat for Same direction with the High, then Low forks.
6. Verify the speed is the sum of the forks (85) ±1 mph.
7. Repeat for the rear antenna (if equipped.)

2 Eagle 3 Remote Control
A.
SAME/OPP
In Stationary
operation, progresses All,
approaching only, and receding only target
zones. In Moving Operations, it toggles
Opposite
and Same Direction.
B.
Down Arrow
Down
arrow in menus; lowers brightness in
Display Menu with manual backlight.
C.
Front
Toggles Front antenna microwave
transmitter on/off
.
D. Rear
Toggles Rear antenna microwave
transmitter on/off
.
E.
MODE/Up
Arrow
Toggles Moving/Stationary Modes, Up
arrow in menu
screens; increases
brightness in Display Menu with manual
control.
F.
Lock
Toggles Target Speed Lock.
Toggles
manual/automatic brightness control in
Display Menu.
G. Test
Shortcut
to Tuning Fork test.
3Eagle 3 Touch Screen Control Pads
A
LOCK/REL
–Toggles locking
and releasing target and patrol
speeds. With unit in HOLD,
press and hold for QuikTrak. In
Audio Menu, toggles Doppler
Audio Squelch/Unsquelch.
B
MODE
- Toggles between
stationary and moving modes. In
Display Menu, toggles C1 & C3
display color settings.
C
Front/Hold
-
Toggles on/off Front
antenna. If rear antenna active,
press to place Rear antenna in
Hold and activate Front. In
Menus, increases level.
D
Rear/Hold
- Toggles on/off Rear
antenna. If front antenna active,
press to place Front antenna in
Hold and activate Rear. In
Menus, decreases level.
E
SAME/OPP
–Stationary –Press
to select Stationary All,
approaching only, and receding
only. Moving
- toggles between
Opposite and Same Direction. In
C1 Display Menu, progresses
background colors.