KYLAND Technology SICOM3024P User manual

SICOM3024P/SICOM3048/SICOM3024 Series Industrial
Ethernet Switches Web Operation Manual
Kyland Technology Co., Ltd.
Publication Date: Sep. 2013
Version: V2.2
FAX: [phone]
Website: http://www.kyland.com
E-mail: [email protected]

Disclaimer:
Kyland Technology Co., Ltd. tries to keep the content in this manual as accurate and as
up-to-date as possible. This document is not guaranteed to be error-free, and we reserve the
right to amend it without notice.
Copyright © 2013 Kyland Technology Co., Ltd.
All rights reserved
No part of this documentation may be excerpted, reproduced, translated, annotated or
duplicated, in any form or by any means without the prior written permission of KYLAND
Corporation.

I
Contents
Preface..................................................................................................................................1
1 Product Introduction............................................................................................................5
1.1 Overview ......................................................................................................................5
1.2 Product Models.............................................................................................................5
1.3 Software Features ........................................................................................................5
2 Switch Access.....................................................................................................................7
2.1 View Types ...................................................................................................................7
2.2 Access through Console Port .......................................................................................8
2.3 Access through Telnet.................................................................................................10
2.4 Access through Web...................................................................................................12
3 Device Management.........................................................................................................14
4 Device Status....................................................................................................................15
4.1 Basic Information........................................................................................................15
4.2 Port Status..................................................................................................................15
4.3 Port Statistics..............................................................................................................17
4.4 System Operating Information....................................................................................17
5 Basic Configuration...........................................................................................................19
5.1 IPAddress..................................................................................................................19
5.2 Basic Information........................................................................................................20
5.3 Port Configuration.......................................................................................................21
5.4 Password Change......................................................................................................24
5.5 Software Update.........................................................................................................24
5.5.1 Software Update through FTP..............................................................................24
5.6 Software Version Query..............................................................................................28
5.7 Configuration Upload/Download.................................................................................28
6 Advanced Configuration....................................................................................................30
6.1 Port Rate Limiting.......................................................................................................30
6.1.1 Overview ..............................................................................................................30
6.1.2 Web Configuration................................................................................................30

II
6.1.3 Typical Configuration Example.............................................................................32
6.2 VLAN..........................................................................................................................32
6.2.1 Overview ..............................................................................................................32
6.2.2 Principle................................................................................................................32
6.2.3 Port-based VLAN..................................................................................................33
6.2.4 Web Configuration................................................................................................34
6.2.5 Typical Configuration Example.............................................................................38
6.3 PVLAN........................................................................................................................39
6.3.1 Overview ..............................................................................................................39
6.3.2 Web Configuration................................................................................................40
6.3.3 Typical Configuration Example.............................................................................41
6.4 Port Mirroring..............................................................................................................42
6.4.1 Overview ..............................................................................................................42
6.4.2 Description ...........................................................................................................42
6.4.3 Web Configuration................................................................................................43
6.4.4 Typical Configuration Example.............................................................................44
6.5 Port Trunk...................................................................................................................44
6.5.1 Overview ..............................................................................................................44
6.5.2 Implementation.....................................................................................................44
6.5.3 Description ...........................................................................................................45
6.5.4 Web Configuration................................................................................................46
6.5.5 Typical Configuration Example.............................................................................47
6.6 Link Check..................................................................................................................48
6.6.1 Overview ..............................................................................................................48
6.6.2 Web Configuration................................................................................................48
6.7 Static Multicast............................................................................................................49
6.7.1 Overview ..............................................................................................................49
6.7.2 Web Configuration................................................................................................49
6.8 IGMP Snooping..........................................................................................................51
6.8.1 Overview ..............................................................................................................51

III
6.8.2 Concepts..............................................................................................................51
6.8.3 Principle................................................................................................................52
6.8.4 Web Configuration................................................................................................52
6.8.5 Typical Configuration Example.............................................................................54
6.9 ACL.............................................................................................................................55
6.9.1 Overview ..............................................................................................................55
6.9.2 Implementation.....................................................................................................55
6.9.3 Web Configuration (SICOM3024P/SICOM3024)..................................................56
6.9.4 Web Configuration(SICOM3048)..........................................................................65
6.9.5 Typical Configuration Example.............................................................................73
6.10 ARP ..........................................................................................................................74
6.10.1 Overview ............................................................................................................74
6.10.2 Description .........................................................................................................74
6.10.3 Web Configuration..............................................................................................74
6.11 SNMP .......................................................................................................................76
6.11.1 Overview.............................................................................................................76
6.11.2 Implementation...................................................................................................76
6.11.3 Description..........................................................................................................77
6.11.4 MIB.....................................................................................................................77
6.11.5 Web Configuration..............................................................................................78
6.11.6 Typical Configuration Example ...........................................................................80
6.12 DT-Ring ....................................................................................................................81
6.12.1 Overview ............................................................................................................81
6.12.2 Concepts............................................................................................................81
6.12.3 Implementation...................................................................................................82
6.12.4 Explanation.........................................................................................................86
6.12.5 Web Configuration..............................................................................................86
6.12.6 Typical Configuration Example...........................................................................91
6.13 RSTP/STP................................................................................................................92
6.13.1 Overview ............................................................................................................92

IV
6.13.2 Concepts............................................................................................................92
6.13.3 BPDU .................................................................................................................93
6.13.4 Implementation...................................................................................................93
6.13.5 Web Configuration..............................................................................................94
6.13.6 Typical Configuration Example...........................................................................98
6.14 RSTP/STP Transparent Transmission......................................................................99
6.14.1 Overview ............................................................................................................99
6.14.2 Web Configuration..............................................................................................99
6.14.3 Typical Configuration Example.........................................................................100
6.15 QoS........................................................................................................................101
6.15.1 Overview ..........................................................................................................101
6.15.2 Principle............................................................................................................101
6.15.3 Web Configuration (SICOM3024P/SICOM3024)..............................................102
6.15.4 Web Configuration (SICOM3048).....................................................................106
6.15.5 Typical Configuration Example.........................................................................110
6.16 MAC Address Aging Time....................................................................................... 112
6.16.1 Overview ..........................................................................................................112
6.16.2 Web Configuration............................................................................................112
6.17 LLDP ...................................................................................................................... 112
6.17.1 Overview ..........................................................................................................112
6.17.2 Web Configuration............................................................................................113
6.18 SNTP...................................................................................................................... 113
6.18.1 Overview ..........................................................................................................113
6.18.2 Web Configuration............................................................................................113
6.19 Alarm ...................................................................................................................... 116
6.19.1 Overview ..........................................................................................................116
6.19.2 Web Configuration............................................................................................116
6.20 Port Traffic Alarm.................................................................................................... 119
6.20.1 Overview ..........................................................................................................119
6.20.2 Web Configuration............................................................................................120

V
6.21 GMRP Configuration and Query.............................................................................121
6.21.1 GARP...............................................................................................................121
6.21.2 GMRP...............................................................................................................122
6.21.3 Description .......................................................................................................122
6.21.4 Web Configuration............................................................................................123
6.21.5 Typical Configuration Example.........................................................................126
6.22 RMON ....................................................................................................................128
6.22.1 Overview ..........................................................................................................128
6.22.2 RMON Groups..................................................................................................128
6.22.3 Web Configuration............................................................................................130
6.23 Log Query...............................................................................................................134
6.23.1 Overview ..........................................................................................................134
6.23.2 Description .......................................................................................................134
6.23.3 Web Configuration............................................................................................134
6.24 Unicast Address Configuration and Query..............................................................136
6.24.1 Overview ..........................................................................................................136
6.24.2 Web Configuration............................................................................................137
Appendix: Acronyms..........................................................................................................139

Preface
1
Preface
This manual mainly introduces the access methods and software features of
SICOM3024P/SICOM3048/SICOM3024 series industrial Ethernet switches, and details Web
configuration methods.
Content Structure
The manual contains the following contents:
Chapter
Content
1. Product Introduction
Overview
Product models
Software features
2. Switch Access
View types
Access through Console Port
Access through Telnet
Access through Web
3. Device Management
Restart
Logout
4. Device Status
Basic information
Port status
Port statistics
System Operating Information
5. Basic Configuration
IP address
Basic information
Port configuration
Password change
Software update (FTP)
Software version query
Configuration upload/download
6. Advanced Configuration
Port rate limiting

Preface
2
VLAN
PVLAN
Port mirroring
Port trunk
Link check
Static multicast
IGMP Snooping
ACL
ARP
SNMP
DT-Ring
RSTP/STP
RSTP/STP transparent transmission
QoS
MAC address aging time
LLDP
SNTP
MSTP
Alarm
Port traffic alarm
GMRP configuration and query
RMON
Log query*
Unicast address configuration and query
Note:
* indicates the features not available on SICOM3048/SICOM3024.

Preface
3
Conventions in the manual
1. Text format conventions
Format
Description
< >
The content in < > is a button name. For example, click <Apply> button.
[ ]
The content in [ ] is a window name or a menu name. For example, click [File] menu item.
{ }
The content in { } is a portfolio. For example, {IP address, MAC address} means the IP
address and MAC address are a portfolio and they can be configured and displayed
together.
→
Multi-level menus are separated by "→". For example, Start → All Programs →
Accessories. Click [Start] menu, click the sub menu [All programs], then click the submenu
[Accessories].
/
Select one option from two or more options that are separated by "/". For example
"Addition/Deduction" means addition or deduction.
~
It means a range. For example, "1~255" means the range from 1 to 255.
2. CLI conventions
Format
Description
Bold
Commands and keywords, for example, show version, appear in
bold font.
Italic
Parameters for which you supply values are in italic font. For
example, in the show vlan vlan id command, you need to supply the
actual value of vlan id.
3. Symbol conventions
Symbol
Description

Preface
4
Caution
The matters need attention during the operation and configuration,
and they are supplement to the operation description.
Note
Necessary explanations to the operation description.
Warning
The matters call for special attention. Incorrect operation might cause
data loss or damage to devices.
Product Documents
The documents of SICOM3024P/3048 series industrial Ethernet switches include:
Document
Content
SICOM3024P Series Industrial Ethernet
Switches Hardware Installation Manual
Describes the hardware structure,
hardware specifications, mounting and
dismounting methods of SICOM3024P.
SICOM3048 Series Industrial Ethernet
Switches Hardware Installation Manual
Describes the hardware structure,
hardware specifications, mounting and
dismounting methods of SICOM3048.
SICOM3024 Series Industrial Ethernet
Switches Hardware Installation Manual
Describes the hardware structure,
hardware specifications, mounting and
dismounting methods of SICOM3024.
SICOM3024P/SICOM3048/SICOM3024
Series Industrial Ethernet Switches Web
Operation Manual
Describes the switch software functions,
Web configuration methods, and steps of
all functions.
Document Obtainment
Product documents can be obtained by:
CD shipped with the device
Kyland website: www.kyland.com

Product Introduction
5
1 Product Introduction
1.1 Overview
The series switches are applied in the power, rail transit, coal mining, and many other
industries, and can work properly in rugged environment. They support MSTP and DT-Ring,
securing reliable operation. With extensive ports, the switches satisfy various customers'
requirements. The series switches employ the internal modular design for flexible expansion.
They comply with IEC61850-3 and IEEE1613 standards.
1.2 Product Models
This series switches include:
SICOM3048
SICOM3024P_V3.1 (V3.1 indicates the hardware version.)
SICOM3024_V3.1 (V3.1 indicates the hardware version.)
1.3 Software Features
This series switches provide abundant software features, satisfying customers' various
requirements.
Redundancy protocols: RSTP/STP, DT-Ring, and MSTP
Multicast protocols: IGMP Snooping, GMRP, and static multicast
Switching attributes: VLAN, PVLAN, QoS, and ARP
Bandwidth management: port trunk, port rate limiting
Security: ACL
Synchronization protocol: SNTP
Device management: FTP software update, configuration upload/download
Device diagnosis: port mirroring, LLDP, link check
Alarm function: port alarm, power alarm, ring alarm, IP/MAC address conflict alarm,
temperature alarm, and port traffic alarm
Network management: management by CLI, Telnet, Web and Kyvision network

Product Introduction
6
management software, and SNMP network monitoring
...

Switch Access
7
2 Switch Access
You can access the switch by:
Console port
Telnet/SSH
Web browser
Kyvision management software
Kyvision network management software is designed by Kyland. For details, refer to its user
manual.
2.1 View Types
When logging into the Command Line Interface (CLI) by the console port or Telnet, you can
enter different views or switch between views by using the following commands.
Table 1 View Types
View Prompt
View Type
View Function
Command for View Switching
SWITCH>
General mode
View recently used commands.
View software version.
View response information for ping
operation.
Input "enable" to enter the
Privileged mode.
SWITCH #
Privileged
mode
Upload/Download configuration file.
Restore default configuration.
View response information for ping
operation.
Restart the switch.
Save current configuration.
Display current configuration.
Update software.
Input "configure terminal" to
enter the Configuration mode
from the Privileged mode.
Input "exit" to return to the
General mode.
SWITCH(conf
ig) #
Configuration
mode
Configure switch functions.
Input "exit" or "end" to return to
the Privileged mode.

Switch Access
8
When the switch is configured through the CLI, "?" can be used to get command help. In the
help information, there are different parameter description formats. For example, <1, 255>
means a number range; <H.H.H.H> means an IP address; <H:H:H:H:H:H> means a MAC
address; word<1,31> means a string range. In addition, ↑ and ↓ can be used to scroll
through recently used commands.
2.2 Access through Console Port
You can access a switch by its console port and the hyper terminal of Windows OS or other
software that supports serial port connection, such as HTT3.3. The following example shows
how to use Hyper Terminal to access switch by console port.
1. Connect the serial port of a PC to the console port of the switch with a DB9-RJ45 cable.
2. Run the Hyper Terminal in Windows desktop. Click [Start] → [All Programs] →
[Accessories] → [Communications] → [Hyper Terminal], as shown in the following figure.
Figure 1 Starting the Hyper Terminal
3. Create a new connection "Switch", as shown in the following figure.

Switch Access
9
Figure 2 Creating a New Connection
4. Connect the communication port in use, as shown in the following figure.
Figure 3 Selecting the Communication Port
Note:
To confirm the communication port in use, right-click [My Computer] and click [Property] →
[Hardware] → [Device Manager] → [Port].
5. Set port parameters (Bits per second: 9600, Data bits: 8, Parity: None, Stop bits: 1, and
Flow control: None), as shown in the following figure.

Switch Access
10
Figure 4 Setting Port Parameters
6. Click <OK>. The switch CLI is displayed. Input password "admin" and press <Enter> to
enter the General mode, as shown in the following figure.
Figure 5 CLI
2.3 Access through Telnet
The precondition for accessing a switch by Telnet is the normal communication between the

Switch Access
11
PC and the switch.
1. Enter "telnet IP address" in the Run dialog box, as shown in the following figure.
Figure 6 Telnet Access
Note:
For details about how to confirm the switch IP address, see section 5.1 IPAddress.
2. In the Telnet interface, input "admin" in User, and "123" in Password. Press <Enter> to log
in to the switch, as shown in the following figure.
Figure 7 Telnet Interface

Switch Access
12
2.4 Access through Web
The precondition of accessing switch by Web is the normal communication between the PC
and the switch.
Note:
IE8.0 or a later version is recommended for the best Web display results.
1. Input "IP address" in the browser address bar. The login interface is displayed, as shown
in the following figure. Input the default user name "admin" and password "123". Click
<Login>.
Figure 8 Web Login
The English login interface is displayed by default. You can click <中文> to change to the
Chinese login interface.
Note:
For details about how to confirm the switch IP address, see section 5.1 IPAddress.
2. After you log in successfully, there is a navigation tree on the left of the interface, as
shown in the following figure.

Switch Access
13
Figure 9 Web Interface
You can expand or collapse the navigation tree by clicking <Expand> or <Collapse> on the
top of the navigation tree. You can perform corresponding operations by clicking [Save
Configuration] or [Load Default] in the top menu. In the upper right corner, you can click <中
文> to switch to the Chinese interface.
Caution:
After you have restored the default settings, you need to restart the device to make settings take
effect.