Lamp ALT-ST15-D360 User manual

1
Thank you for selecting our product. Before starting installation, please read this manual thoroughly to ensure correct installation.
Please keep this manual at hand for future reference.
Installation Manual
ALT-ST15-D360
POCKET DOOR SYSTEM <INSET> SOFT CLOSING
ABOUT THE PRODUCT
●This product is hardware for vertical pocket doors in furniture,
enabling slow door closing.
●The door is stored inside the cabinet.
●The door incline can be easily adjusted via a 5-stage angle retention
mechanism.
SPECIFICATION
Type S M L LL
Rail Q’ty 2244
Door Width Max. 600 mm
Door Height 500 - 700 mm 700 - 900 mm 900 - 1200 mm 1200 - 1600 mm
Door Thickness 18 - 30 mm
Door Weight Max. 9 kg Max. 9 kg Max. 15 kg Max. 15 kg
Caution Prohibited Required
Caution If not followed, injury or damage may result.
• Provide a cabinet that can withstand the weight and impact of opening and closing the door. Be sure to use the specified screws
and tighten them securely. If the mounting strength is insufficient, the door may fall and cause injury.
• Follow the specified dimensions, specifications, and alignment of the cabinet. Make sure that the cabinet is not warped, since it
may affect the movement of the door.
• Position the handle so that the hand holding the handle does not strike the side board.
• When moving the cabinet, remove the door and re-assemble it at the site.
• This product is a part for furniture. After installation, check the function and safety of the final product.
• Make sure to check the screws for slack at regular intervals. (one month and six months from first usage and then once every
year is recommended).
• Be sure to inform users of the precautions below regarding opening and closing.
• Do not force the door to open past 90°. Damage may result.
• When closing the door, pull it out until the catch clicks and then close it.
• Repeated opening and closing may cause the inner rail to come off, shortening the door movement distance.
Push the door fully inward or pull it fully out to correct the deviation.
Type
Size of rail
Item Name Guide
FOR YOUR SAFETY AND CORRECT INSTALLATION
ALT - ST15 - D360S - 16

2
Inset (ST15-D360)
S Type M Type L Type LL Type
①
Rail※1
AL80C
16 - 28 inches 2244
②
Connecting plate ALT-ST15-S
ALT-ST15-M
ALT-ST15-L
ALT-ST15-LL
1111
③Concealed hinge H360-D26-0T 2233
④Hinge mounting plate 360-P4W-30T 2233
⑤Mounting plate ALT-MP30 2233
⑥Guide roller ALT-GR 2233
Parts Set
⑦Catch※2
AL127-CH 2233
⑧Roller DU19-B4SBR 2222
⑨
Roller bracket ALT-2V-AB 1111
ALT-2V-BB 1111
⑩Insert nut SC-107-13 2222
⑪Slider G-175 2222
⑫ALT-AB M5 Adjustment bolt 1122
⑬Bind head tapping screw 3.5×15 18 18 34 34
⑭Bind head tapping screw 4×16 6666
⑮Raised countersunk head tapping screw 3.5×15 4466
⑯+H[DJRQÀDQJHKHDGVFUHZ0î 4488
⑰+H[DJRQÀDQJHKHDGVFUHZ0î 4488
⑱Raised countersunk head screw M4×10 6699
⑲Hex key 1111
※1Do not cut rails. Rail sizes (inches) include 16, 19, 22, 24, and 28.
※2This catch holds the door at the pulled-out position. Be sure to mount it on the uppermost and lower slide rails
(For details, see P.4 3).
COMPONENT PARTS/QUANTITY

3
DIMENSIONS: INSET ※Description is for left-handed product.
Rail Size Door Storing Cabinet Depth
16 316 + Door Thickness 412 + Door Thickness
19 392 + Door Thickness 488 + Door Thickness
22 468 + Door Thickness 564 + Door Thickness
24 519 + Door Thickness 615 + Door Thickness
28 621 + Door Thickness 717 + Door Thickness
■Fixed on the side board
·Make middle board removable for maintenance.
·Install a separately available door stopper for the
leading edge.
Caution
Door Thickness - Max. 14
Gap: 3
9
15.9
Door Thickness + 8
Side board
Hidden Cover
Door Thickness: 18 - 30
①
②
③
④⑤
Arrow a
Min. 60
Min. Door Thickness + 70
Middle board
117.5
Installation Position for Rail
60
35
12
Door Thickness
+ 11
Side board
Mounting holes (top board/bottom board)
ϕ3 Depth 10
Mounting holes (top board/bottom board)
ϕ10 Depth 13
⑩
⑧
⑪
Arrow b (for Insert nut)
⑥
Door Thickness
+ 28
8
57 16
Door Thickness
+ 6
Side board
⑨
⑧
⑪
Arrow b (for Roller bracket)
⑥
Side mount bracket
(horizontal/vertical use / optional)
Min. 60
Door Thickness - 5
32
Middle board
Side board
Bracket
※3
⑪(when mounting brackets
at bottom left and top right)
⑧
Section c-c
55
Gap: 3 Gap: 3
Max. Door Height [S Type] 500 - 700 [M Type] 700 - 900
[L Type] 900 - 1200 [LL Type] 1200 - 1600
Max. Door Weight
[S Type]...
[M Type]...
[L Type]...
[LL Type]...
Max. 9kg
Max. 9kg
Max. 15kg
Max. 15kg
A
B
C
DE
Door
Door Storing
Door Storage Position
Door width: Max. 600
Rail Q'ty
[S Type]...
[M Type]...
[L Type]...
[LL Type]...
2 pcs
2 pcs
4 pcs
4 pcs
28
ϕ40 Depth 15
Backside of door
Door Processing
Side view Front view
a
b
⑦
⑦
⑦
⑥
⑥
⑥
⑫
⑫
※3Slider mounting holes for mounting
brackets at top left and bottom right.
Type Hinge pitch Rail pitch
ABCDE
S Type 360 í260 íí
M Type 560 í460 íí
L Type 380 380 260 140 260
LL Type 530 530 430 100 430
Item Name
ALT - BR
c
c
Min. 15
6.4 12
Min. 15
6.412
12
Min. 70
Top board
Bottom board
⑥
⑥
Min. 70
12
Door

4
1
Mounting the insert nut, roller, and slider
※Mount symmetrically on the top board as well.
⑪Slider
(ϕ3 depth 10)
⑧Roller
⑩Insert nut
(ϕ10 depth 13)
Side mount bracket
(Optional)
⑪Slider
(ϕ3 depth 10)
⑧Roller
⑨Roller bracket
⑭Bind head tapping
screw 4×16
⑧Roller
⑭Bind head tapping
screw 4×16
⑪Slider
<Use roller bracket ⑨> <Use insert nut ⑩>
■Fixed on the side board ■Fixed on the top and bottom boards
2
Mounting the concealed hinge, hinge mounting plate, and mounting plate
Backside of door
③Concealed hinge
(ϕ40 Depth 15)
⑮Countersunk head tapping screw
3.5×15
3
Temporarily fastening the slide rail and mounting the guide roller
Temporarily fasten all rail ends (outer and inner)
Screws: ⑬Bind head tapping screw 3.5×15
2
Mount catch ⑦
1
⑬
Functions when pulled
fully out.
⑦Catch ⑥⑬
⑥⑬
⑥⑬
⑬Mount the guide roller
3
⑥Guide roller
⑬Bind head tapping screw
3.5×15
INSTALLATION PROCEDURE ※Description is for left-handed product, LL type.
④Hinge mounting plate
⑤Mounting plate
②Connecting plate
⑱Raised countersunk head screw
M4×10
Type S M L LL
Rail
Q’ty 2244
Catch
Q’ty 2233
Catch
mounting
location
[■part]

5
4
Temporarily fastening of connecting plate
Temporarily fasten
all rails to connecting plate
Screws: ⑯Hexagon flange head screw M4×6
⑰Hexagon flange head screw M4×8
Temporarily fasten
⑫Adjustment bolts (1 - 2 pcs)
(After tightening, loosen 90° - 180°)
1
2
⑫
⑰
⑯
⑫ALT-AB M5 Adjustment bolt
Furthest front
Move the connecting plate from
the front to the back, adjusting
all the screw positions so that
it moves smoothly
1Tighten the part (both ends)
Fasten all the parts (near centre)
Screws: ⑬Bind head tapping screw 3.5×15
2
3
1
② Connecting plate
2
2
3
5
5DLO¿[LQJ 6
Hanging door
Push the hinge into the hinge
mounting plate
How to remove
1
2

<1> Depth adjustment screw
<3> Horizontal adjustment screw
<2> Vertical adjustment screw
6
7
Adjusting the door
8
Door depth, vertical, horizontal, and closing speed adjustment
② Connecting plate
⑫Adjustment bolt
Check that the screws fixing the connecting plate and the adjustment bolts are loose.
Lift the door and shift the adjustment bolt backward one level at a time,
to make the door and connecting plate vertical.
5-stage adjustment is possible in accordance with the door weight.
※When there are adjustment bolts at top and bottom, align their positions.
Tighten all the temporarily fastened screws.
1
3
2
12
5
4
3
Front
Back
Before adjustment After adjustment
12
5
4
2
2
2
3
12
5
4
3
②Connecting plate
⑮ Adjustment bolt
Light door
Heavy door
Adjustment method
1
2
3
4
5
Fast
Slow
<3> <3>
<2>
<2>
<1>
<1>
SUGATSUNE KOGYO CO., LTD.
Tokyo, JAPAN
Phone: [phone]
E-mail:[email protected]
SUGATSUNE KOGYO (UK) LIMITED
Reading, UK
Phone: +44 1189272 955
E-mail:[email protected]
SUGATSUNE SHANGHAI CO., LTD.
Shanghai, CHINA
Phone: [phone]
E-mail:[email protected]
Guangzhou, CHINA
Phone: [phone]
E-mail:[email protected]
SUGATSUNE KOGYO INDIA
PRIVATE LIMITED
Mumbai, INDIA
Phone: [phone]
E-mail:[email protected]
Delhi, INDIA
Phone: [phone]
[phone]
E-mail:[email protected]
SUGATSUNE AMERICA, INC.
California, USA
Phone: [phone]
E-mail:[email protected]
Chicago, USA
Phone: [phone]
E-mail:[email protected]
SUGATSUNE CANADA, INC.
Montreal, CANADA
Phone: [phone]
E-mail:[email protected]
SUGATSUNE KOREA CO., LTD.
Incheon, KOREA
Phone: [phone]
E-mail:[email protected]
2023.05 1540-2
SUGATSUNE EUROPE GmbH
Dusseldorf, GERMANY
Phone: [phone]
E-mail:[email protected]