Laser CDP-WM03-388 User manual

Personal CD/MP3 Player
CDP-WM03-388
User Manual

WHAT’S IN THE BOX
•CD/MP3 player
(2 AA battery not included)
•Headphone
•User Manual
Compatible Disc CDs, CD-R/RW,
MP3-CDs
Power source
2 AA batteries or DC 5V
Playback time
Up to 7 hours play time
SPECIFICATIONS

POWERING THE PERSONAL
CD/MP3 PLAYER
BATTERY INSTALLATION
1. Open the battery cover
2. Place two AA batteries into the empty
battery slots
3. Place the battery cover back down
Note: The display will show battery capacity
OPTIONAL AC ADAPTER
(NOT INCLUDED)
1. Remove batteries from the unit
2. Insert the AC adapters small DC power jack
into the port located on the rear of the unit

CONTROLS

1. Disc Tray
2. Battery compartment
3. Tray open Button
4. LCD Display
5. Play/Pause/Power on
6. Stop/Power O
7. Program button
8. Mode Button
9. Previous Track Button
10.Next Track Button
11. Hold Button
12.Volume Dial
13.DC power jack
14.Headphone Jack
15.Bass Boost Switch
on/o
CONTROLS
continued...

CD PLAYBACK
POWER ON/OFF
1. Open the Tray door by pushing the Tray
door button
2. Place disc onto the spindle until it snaps
in place
3. Close the tray
4. Press the Play/Pause button
BASIC OPERATION
1. Press the Play/Pause button to start playing
the disc
2. Press the Play/Pause button while playing
and the disc will pause, press the Play/Pause
button again and it will continue playing
3. Press the Stop Button while playing, the
device will stop playing the disc and power
o after 30 seconds
4. Press the Stop button twice and the unit will
power o.

CD PLAYBACK
PLAYBACK MODES
1. Press the mode button until the LCD
displays “1” This will play a single track on
repeat. If your disc has stopped, press play
to resume.
2. Press the mode button until the LCD
displays “All”. This will play the entire CD on
repeat.
3. Press the mode button until “1” or “All”
appear, this will cancel the repeat function.
4. Press the mode button until “RND” appears
on the LCD display, this will play the entire
CD at random. To cancel this function, press
the mode button until “RND” is displayed
again.
continued...

CD PLAYBACK
5. Press the mode button until INTRO is
displayed, this will play the rst 10s of a track.
continued...

PROGRAMMED PLAY
Select the tracks from the CD disc to play and
you choose 20 track max.
1. Press the stop button
during playback. Press the
program button
3. Once you have
selected your desired track,
press the program button
again to program the track.
2. Pressing the previous or
next button and the desired
track number will ash on the
display
4. If you want all tracks to be
programmed, repeat step
5. To begin the programmed
playback, press the play button.
(NOTE: When playback stops,
the programmed playback will
be erased.) Notice: To cancel
programmed playback, press the
play button.

ESP
This player has ESP function. Anti-shock
system to prevent interruption of CD playback
in case of vibration When playing, the screen
will display ESP.With up to 40 seconds anti-skip
protection for CDs and 120 seconds anti-skip
protection for CD-R, portable cd player will
read cd smoothly when you walk or drive.