Laserworld PRO-7000R/640 User manual

PRO-7000R/640
USER MANUAL
Please read this manual carefully before use!

USER MANUAL: Laserworld Proline PRO-7000R/640
Date: 01/2008
Page 2 of 17

USER MANUAL: Laserworld Proline PRO-7000R/640
Date: 01/2008
Page 3 of 17

USER MANUAL: Laserworld Proline PRO-7000R/640
Date: 01/2008
Page 4 of 17

USER MANUAL: Laserworld Proline PRO-7000R/640
Date: 01/2008
Page 5 of 17

USER MANUAL: Laserworld Proline PRO-7000R/640
Date: 01/2008
Page 6 of 17

USER MANUAL: Laserworld Proline PRO-7000R/640
Date: 01/2008
Page 7 of 17

USER MANUAL: Laserworld Proline PRO-7000R/640
Date: 01/2008
Page 8 of 17

USER MANUAL: Laserworld Proline PRO-7000R/640
Date: 01/2008
Page 9 of 17

USER MANUAL: Laserworld Proline PRO-7000R/640
Date: 01/2008
Page 10 of 17

USER MANUAL: Laserworld Proline PRO-7000R/640
Date: 01/2008
Page 11 of 17

USER MANUAL: Laserworld Proline PRO-7000R/640
Date: 01/2008
Page 12 of 17

USER MANUAL: Laserworld Proline PRO-7000R/640
Date: 01/2008
Page 13 of 17

USER MANUAL: Laserworld Proline PRO-7000R/640
Date: 01/2008
Page 14 of 17

USER MANUAL: Laserworld Proline PRO-7000R/640
Date: 01/2008
Page 15 of 17

USER MANUAL: Laserworld Proline PRO-7000R/640
Date: 01/2008
Page 16 of 17

USER MANUAL: Laserworld Proline PRO-7000R/640
Date: 01/2008
Page 17 of 17
EU- Declaration of Conformity
We hereby confirm that the following device
Laserworld PROLINE PRO-7000R/640
complies with the essential safety requirements, laid down in the regulations of the
committee to assimilate the provisions of law of all participating EU states on the
electromagnetic compatibility (98/336/EWG).
The device has been classified considering the following EU-norms on
electromagnetic compatibility:
DIN EN 55103-1: 1996
DIN EN 55103-2: 1996
DIN EN 61000-3-2:2000 + A2: 2005
DIN EN 61000-3-3:1995 + A1: 2001
Assessment of compliance of the product with the requirements relating to the Low Voltage
Directive (LVD) was based on the following standards:
DIN EN 60065 : 2002
Furthermore, the device is verified in correspondence to the laser class regulations DIN EN
60825-1, if properly set up according to the upper mentioned laser safety regulation.
After installing the device, an inspection and official approval is indispensable for the overall
setup. The inspection must follow the european guidelines EN 60825-1 and corresponding
regulations for the prevention of accidents BGV-B2.
This declaration is executed on behalf of the Laserworld Proline PRO-7000R/640 Laser
manufacturer.
Laserworld (Switzerland) AG
Oberstrasse 1
8274 Tägerwilen
SWITZERLAND
Authorized person:
Supervisory board Ms Rhea Gössel
place of business: 8274 Tägerwilen / SWITZERLAND
company number: CH-440.3.020.548-6
Commercial Registry Kanton Thurgau
www.laserworld.com
[email protected]
representative according to EMVG:
Cleantech Europe GmbH
Managing Director: Thomas Schulze
Fürkhofstr. 5
81927 München / DE