
1Press 2Pull down
Machine’s milk unit must be cleaned at the end of each day.
If cleaning is missed, the machine will automatically block milk brewing until this has been completed.
Remove the milk pipe from the milk
container and disassemble the milk
unit from the machine.
Clean the parts under running water,
being sure to use the brush provided
to clean inside milk unit pieces.
Place the milk tube in a container
containing cleaning solution (water
+ milk cleaner, 8Oz. min.). Place an
empty glass under the spouts (14 Oz.
min.). Press OK to confirm and start
the cleaning procedure.
Reassembly the milk unit and place
into machine.
Place the milk tube in a container
containing fresh water (8Oz. min.)
to rinse the system and complete
the procedure. Machine is ready
to brew your beverage.
2 3
5
46
1
2
CLASSY
PRO
SEE OTHER SIDE FOR HOT BEVERAGES PREPARATION
DAILY CLEANING
QUICK START GUIDE
For a video on how to brew SCAN ME
Press System Clean button and follow
steps shown on machine display.
1