LAZBOY Quinn User manual

USE AND CARE GUIDE
Sears Quinn 4pc Seating Set
Product Code: D71 M20932
UPC Code: 7-22938-11309-5
Date of Purchase: __ / __ / __
La-Z-Boy® is a registered trademark of La-Z-Boy Incorporated and is used under license to BJI, Inc.
© 2015 La-Z-Boy Incorporated.

2
Thank you for your purchase
THANK YOU FOR YOUR PURCHASE!
We are pleased that you have chosen Sears for your outdoor furniture purchase. We hope that you
enjoy the unmatched quality, comfort, and style of your new patio set. Every piece is meticulously
considered all the way down to the smallest details, exclusively for you, by our world class design
team. We know you have a choice when it comes to your patio furniture needs, so from our team to
yours, thank you for letting us be a part of your outdoors.
Table of Contents..........................................2
Safety Information ........................................ 3
Set up your furniture properly...................... 3
Examine your furniture................................ 3
Warranty ........................................................ 3
What is covered .......................................... 3
What is not covered .................................... 3
Care and Maintenance.................................. 4
Pre-Assembly................................................ 5
Planning assembly...................................... 5
Observe weight limits.................................. 5
Hardware included ...................................... 5
Package contents ....................................... 7
Assembly Instructions
Lounge Chair............................................... 10
Sofa.............................................................. 13
Coffee Table ................................................ 16
Customer Services ..................................... 18
Table of Contents

3
SET UP YOUR FURNITURE
PROPERLY
□Ensure that all parts are assembled
properly and fully tightened as per the
instructions.
□When placing in the desired location,
ensure that all legs are resting on the same
surface. You may adjust the legs levelers
as required to ensure that the item stands
in a rigid position.
EXAMINE YOUR FURNITURE
□Examine occasionally to ensure that there
are no loose parts. If loose parts are found,
they must be retightened fully before
additional use.
THIS IS A RESIDENTIAL WARRANTY AND DOES NOT APPLY FOR
COMMERCIAL USE.
2 YEARS WARRANTY FOR FRAME, 1 YEAR WARRANTY FOR CUSHIONS
WHAT IS COVERED
We warrant the frame to be free of manufacturing defects to the original purchaser for 2 years.
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service
center.
This warranty does not cover commercial use, hardware, acts of nature, fire, freezing and abusive
use.
Discoloration or fading of the finish or fabrics as a result of chemicals or spills is not covered.
Glass table top breakage and corrosion or rusting of hardware are not covered.
In addition, purchase parts are not covered under this warranty.
Safety Information
WARNING:
1. Do not crawl, stand, or sit on table tops.
2. Do not set or lay heavy items on table
tops.
3. Avoid extreme hot & cold items being
placed on table tops.
CAUTION: Read all of the instructions in
this manual before you begin assembly.
Failure to do so may result in faulty
assembly and potential injury!
Warranty

4
Proof of purchase (dated register receipt) is required for warranty claims.
We reserve the right to make substitutions with similar merchandise, if the model in question is no
longer in production.
For a copy of our full limited warranty, please contact our customer service team below.
Contact the Customer Service Team at 1-866-391-4868 or visit www.bjifurniture.com.
Care and Maintenance
□Do not allow water to build up in frames. This will cause corrosion and possible freezing damage
in cold climates.
□Use a mild soap and water for normal cleaning. DO NOT use janitorial or alcohol based cleaners.
Some cleaners may be marked as natural, but some ingredients can cause discoloration or have
adverse reaction to your finish.
□Rinse with clean water and dry with a soft, absorbent cloth towel.
□Cushions, slings, and/or an umbrella may be cleaned by hand with a solution of soap and water
with a clean water rinse. Never machine wash as this will result in shrinking or damage. After
cleaning, tip on end and allow to drip dry. Never use a commercial or home dryer to tumble dry
fabric goods.
□Treat frames with liquid wax for maximum protection against UV rays and /or salty, damp air.
□Umbrella should be closed when not in use. Umbrella should be removed and stored in the event
of wind, rain, hail, sleet, snow, or any other inclement weather. To prevent damage to your table,
always use an umbrella base with your umbrella. Store indoors during winter months.
□Use and operation: To prolong the life of your outdoor furniture, cover when not in use. Store
indoors during winter months.
Warranty (continued)

5
Pre-Assembly
PLANNING ASSEMBLY
PLEASE READ COMPLETE USE AND CARE GUIDE PRIOR TO ASSEMBLY!
Identify all parts packed in the carton against the parts list. Remove all protective materials and place
the parts on a nonabrasive surface to avoid scratching. It takes about 45 minutes for 3 persons to
complete all the assembly.
NOTE: More than one person may be
required to complete the assembly of this
product.
OBSERVE WEIGHT LIMITS
The recommended weight limit for each item is listed below:
□Lounge chair: 300lbs
□Sofa: 600 lbs
TOOLS REQUIRED
Socket
Wrench
[included]
LOUNGE CHAIR HARDWARE INCLUDED
NOTE: Hardware not shown to actual
size.
Part Description Quantity
CC M6*30mm hex bolt 16
FF M6 bolt cap 16
GG M8 bolt cap 16

6
Pre-Assembly (continued)
SOFA HARDWARE INCLUDED
NOTE: Hardware not shown to actual
size.
COFFEE TABLE HARDWARE INCLUDED
NOTE: Hardware not shown to actual
size.
Part Description Quantity
AA M6*40mm hex bolt 4
BB M6*35mm hex bolt 4
DD M6*20mm hex bolt 1
FF M6 washer 9
GG M6 bolt cap 9
Part Description Quantity
EE M6*15mm hex bolt 12
FF M6 washer 12
GG M6 bolt cap 12

7
LOUNGE CHAIR PACKAGE CONTENTS
Pre-Assembly (continued)
Part Description Quantity
C Left arm 2
D Right arm 2
E Seat frame 2
F Back frame 2
G Seat cushion 2
H Back cushion 2
I Toss pillow 2

8
Pre-Assembly (continued)
SOFA PACKAGE CONTENTS
Part Description Quantity
C Left arm 1
D Right arm 1
J Seat frame 1
K Back frame 1
G Seat cushion 3
H Back cushion 3
I Toss pillow 2

9
Pre-Assembly (continued)
COFFEE TABLE PACKAGE CONTENTS
--------------------------------A
--------------------------------B
□EVERY BOLT NEEDS TO BE USED WITH A WASHER.
□DO NOT FULLY TIGHTEN BOLT UNTIL INDICATED IN STEP 2 FOR LOUNGE CHAIRS AND
SOFA, STEP 1 FOR COFFEE TABLE.
Part Description Quantity
A Table top 1
B Leg 4
Safety Information

10
Lounge Chair Assembly
Instruction
1 Attaching the arm
□Attach the right arm (D) to the seat (E) using M6 hex bolts (CC) and M6 washers (FF).
□Repeat these instructions to attach the left arm (C) to the seat (E).
□Do not tighten the hex bolts until assembly is complete.