Lean Cars A730-2 User manual

Manual Instruction
A730-2
Special Note:
The car hopper is a trim only. No loading people or goods.
◆Please read the manual carefully before assembling;
◆Preserve the manual properly for future reference;
◆The manual is for assembling and using reference only. Details will be possibly
1

improved and updated, including structure, appearance, packing, functions, and etc.
Please refer to the real object as standard if there issomething different from the manual.
1. Before Assembling
Warning!
Choking Hazard: Small parts, Not for kids under 3 years.Dispose plastic bags carefully.
It’s dangerous to kids.Adult assembly required.Use care when unpacking as components to be
assembled may pose small parts/sharp edge hazard.
Check if the charger is in good state, including the wire, socket, and all details. Stop use it if it
looks broken in some way, till it’s fixed.
Tools required(self-provided):
2. Specifications:
Motor: 12V/540 * 2 /540 * 4
Battery: 12V7AH / 12V10AH / 2*12V7AH
Charger: 12V1000MA
Max Speed：5-7 km/h
Suitable Age：3 years+
Maximum Loading Capacity：60 kg
Item size：1500×790×720MM
Charging time: 8-12 hours
Battery life：300 times charge&discharge
2

3. Exploded View and Parts List
No. Parts Name Qty No. Part Name Qty
1Body 1 9 seat 1
2Steer Wheel 110 charger 1
3chimney 111 Screw kit 1
4Remote control 112 manual 1
5windshield 113 Motor （Left&right） 4
6Front wheel 214 Rear axle 1
7Rear wheel
（driving）
415 Metal rail 1
8Wheel cover 416 Hopper baffle 1
Note: some parts need to be fixed from 2 sides.
Screw Kit
parts qty Where to use
Atapping screw 4x12 8Front turning structure
Btapping screw 4x12 1chimney
Ctapping screw 4x12 6Hopper baffle
Dtapping screw 4x12 4seat
Etapping screw 4x12 2windshield
3

FShim M10 1Steer rod hook
Gsplit pin 1Steer rod hook
4. Turning structure and rod assembling
前知
A. Turn the turning rod hook, and put the turning structure onto the plastic
body, make sure the screw holes on right position, then fix it by 8 pcs
tapping screws.
4

A. Turn the steer rod hook to make the hook head right to the steer rod hole
of the steer structure, press it to make it through the rod hole. Then put the
M10 shim on the hook head, and lock the head by the split pin.
5. Wheels and steer wheel Assembling
前知
5

A. Put the axles through the body, and assemble the motor, wheel by shim and
M10 nut, then fix the wheel cover on to right buckle position and press it to
lock. (Note: motors need to be distinguished as Left & Right.）
A. Connect the wire of steer wheel with the car side, make sure the wire
connection is color to color, then insert the wire into the wire hole and then
put the steer wheel on, fix it by buckle lock.
6

1. Windshield, chimney and hopper baffle assembling
A. Stuck the windshield into the slot, and fix it by 2 pcs tapping screws.
A. Stuck the chimney into the slot, and fix it by 4 pcs tapping screws.
7

A. Put the hopper baffle onto right position and fix it by 6 tapping screws.
7. Battery wire connection, metal rail and seat assembling.
A. Connect the battery wire terminals by color to color, and then connect the motor terminals to
to other 2 terminals from the controller wire terminals, no color difference;
A. Check the picture, insert 2 sides of the metal rail into 2 holes, and fix it by 2 tapping
screws and 1 machine screw & nut, then cover the battery compartment and fix it by tapping
screws.
8

A. Put the seat onto right position and fix it by 4 tapping screws.
Be noted the seat could be adjusted by different screw holes position.
1. Functions Sketch
⦁Multifunctional control board;
⦁Power switch;
⦁Music button;
⦁Forward/reverse switch;
⦁High/Low speed switch;
⦁Pedal accelerator switch: pedal to move, release it to stop the car
gradually.
⦁Charging socket
9

1. USB port: play music files in USB device.
2. TF card port: play music files in TF card device.
3. AUX port: to connect MP3 device or mobile to play related files.
4. Education files play button & Pre. file shift(short press)/volume turning
down(long press)
5. Stories play button / play or pause button in USB/TF card mode
6. Music play button & Next. file shift(short press)/volume turning up(long
press)
7. Mode button: shift mode from blue-tooth to USB mode.
8. Voltage meter display & mode display
Put USB device or TF card and play, other playing files will be stopped.
10