LeapFrog Count-Along Basket & Scanner User manual

Instruction Manual
This manual contains important information. Please keep it for future reference.

2
INTRODUCTION
Thank you for purchasing the Count-Along Basket & ScannerTM!
Shop, scan and smile as you learn about numbers, colors, shapes,
food names and nutrition.
Food
Pieces
Shopping
Cart/Basket
Sliding Cart
Handle
Price Tags
On/Off/Mode
Selector
Scanner
Trigger
Scanner
Reader
Shopping
Lists
Transformation
Locks
Scanner
Holder

3
INCLUDED IN THE PACKAGE
• Count-Along Basket & ScannerTM
• 3 double-sided shopping list cards with strap
• 8 food pieces
• Quick Start Guide
WARNING
All packing materials such as tape, plastic sheets, packaging
locks, removable tags, cable ties, cords and packaging screws
are not part of this toy, and should be discarded for your child’s
safety.
NOTE
Please save this Instruction Manual as it contains important
information.
ATTENTION
Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches, étiquettes, cordons et vis d’emballage. Ils
ne font pas partie du jouet.
NOTE
Il est conseillé de sauvegarder ce manuel d’instructions car il
comporte des informations importantes.
NOTE
Please cut and discard the cords before
playing with the unit. The cords are not part
of the product and should be discarded for
your child’s safety.

4
GETTING STARTED
BATTERY REMOVAL AND INSTALLATION
1. Make sure the unit is turned Off.
2. Find the battery cover located on the back of the unit, use a
screwdriver to loosen the screw, and then open the battery
cover.
3. Remove old batteries by pulling up on one end of each
battery.
4. Install 2 new AAA (AM-4/LR03) batteries following the
diagram inside the battery box. (For best performance,
alkaline batteries or fully charged Ni-MH rechargeable
batteries are recommended).
5. Replace the battery cover and tighten the screw to secure.

5
IMPORTANT: BATTERY INFORMATION
• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable
batteries.
• Only batteries of the same or equivalent type as
recommended are to be used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove exhausted batteries from the toy.
• Dispose of batteries safely. Do not dispose of batteries in
fire.
RECHARGEABLE BATTERIES:
• Remove rechargeable batteries from the toy before
charging.
• Rechargeable batteries are only to be charged under adult
supervision.
• Do not charge non-rechargeable batteries.
WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.
ATTENTION :
Les piles ou accumulateurs doivent être installés par un
adulte.
Tenir les piles ou accumulateurs hors de portée des enfants.

6
PRODUCT FEATURES
1. On/Off Mode Selector
Slide the On/Off Mode Selector to turn
the toy on and select the mode.
2. Scanner Trigger
Pull the Scanner Trigger to activate
scanner sounds.
3. Food Pieces
Insert price tags into the square Scanner
Reader (located on the front of the
scanner) to trigger silly learning phrases
and sounds. To detach from the scanner,
gently pull the food out or press the
Scanner Trigger.
4. Shopping Lists
Scan all the items on a Shopping List to
play encouraging sounds and phrases.
5. Shopping Cart/Basket
Pull the cart or carry the basket for
pretend shopping fun.

7
6. Sliding Cart Handle
Slide the handle out of the basket to pull
the cart. The toy must be in cart mode
for the wheels to spin freely when pulled.
7. Transformation Locks
Activate the Transformation Locks to
transform the cart into a basket and back
again. For your child’s safety, only adults
should transform the cart/basket.
8. Scanner Holder
Insert the scanner into the Scanner
Holder when not in use.
9. Automatic Shut-Off
To preserve battery life, the unit will automatically shut off
after approximately 45 seconds without input. The unit can
be turned on again by pressing the trigger, switching modes
or inserting food price tags into the square Scanner Reader.

8
TOY TRANSFORMATION
1. Forsafety reasons, have an adult transform
the basket. Locate the Transformation
Locks on both sides of the cart.
2. One at a time, press the buttons and slide
to the right to the unlocked position.
3. Slide the unit up or down to transform
to cart or basket.
4. Once in the desired form, slide both
Transformation Locks left to the locked
position.
ACTIVITIES
1. Learn Mode
Change the On/Off/Mode Selector on the scanner to the
magnifying glass icon. Insert price tags on the Food Pieces
into the square Scanner Reader on the front of the scanner
to hear food names, numbers, colors, shapes and melodies.

9
2. Counting Mode
Change the On/Off/Mode Selector on the scanner to the
numbers icon. Instructions will tell how many items to scan.
Insert price tags on the Food Pieces into the square Scanner
Reader on the front of the scanner to scan and count food
items.
3. Game Mode
Bargain bonanza! Change the On/Off/Mode Selector on
the scanner to the star icon. The toy will describe different
types of food. Scan the correct food as quickly as you can!
To increase the challenge, spread the Food Pieces farther
apart.
4. Shopping Lists
Scan all the items on any of the six Shopping Lists in
order. Start with the items at the top of the list and move
downwards. Properly scanning all the items on a list in order
triggers rewarding sounds and phrases.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct
heat sources.
3. Remove the batteries if the unit will not be in use for an
extended period of time.
4. Do not drop the unit on hard surfaces and do not expose
the unit to moisture or water.

10
TROUBLESHOOTING
If for some reason the program or activity stops working, please
follow these steps:
1. Turn the unit Off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace
the batteries.
4. Turn the unit back On. The unit should now be ready to
use again.
5. If the unit still does not work, install a new set of batteries.
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency
interference. It should revert to normal operation when the
interference stops. If not, it may become necessary to turn the
power Off and back On, or remove and reinstall the batteries.
In the unlikely event of an electrostatic discharge, the unit may
malfunction and lose memory, requiring the user to reset the
device by removing and reinstalling the batteries.
Impact de l’environnement
Une défaillance de fonctionnement de l’appareil peut
survenir s’il est sujet à des interférences avec les fréquences
radioélectriques. Le fonctionnement normal de l’appareil devrait
reprendre avec l’arrêt des interférences. Si ce n’est pas le cas, il
peut s’avérer nécessaire d’éteindre et rallumer l’appareil ou de
retirer et réinstaller les piles. Dans l’éventualité peu probable
d’une décharge électrostatique, un mauvais fonctionnement
et une perte de mémoire de l’appareil peuvent se produire.
L’utilisateur doit alors retirer et réinstaller les piles pour
réinitialiser l’appareil.

11
NOTE
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
CAUTION
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.

12
IMPORTANT NOTE:
If the problem persists, please call our Consumer Services
Department at 1-800-701-5327 in the U.S. or email
[e-mail]. Creating and developing LeapFrog®
products is accompanied by a responsibility that we take
very seriously. We make every effort to ensure the accuracy
of the information, which forms the value of our products.
However, errors sometimes can occur. It is important for you
to know that we stand behind our products and encourage
you to contact us with any problems and/or suggestions
you might have. A service representative will be happy to
help you.
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Trade Name: LeapFrog®
Model: 6142
Product Name: Count-Along Basket & ScannerTM
Responsible Party: LeapFrog Enterprises, Inc.
Address: 2200 Powell Street, Suite 500
Emeryville, California 94608
Website: leapfrog.com
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE,
AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
CAN ICES-003 (B)/NMB-003(B)

LeapFrog Enterprises, Inc.,
A subsidiary of VTech Holdings Limited.
TM & © 2021 LeapFrog Enterprises, Inc.
All rights reserved.
Read our complete warranty policy online
at leapfrog.com/warranty
Visit our website for more
information about our products,
downloads, resources and more.
leapfrog.com
IM-614200-001
Version:0