Leer SR 250 Service manual

1
FOR YOUR RECORDS
DATE PURCHASED:___________________________________
SERIAL NUMBER:_____________________________________
LEER RETAILER:______________________________________
WITH LEER’S EXCLUSIVE
INSTALLATION INSTRUCTIONS &
OWNER’S MANUAL
Thank you for purchasing the LEERRSR 250 soft rolling tonneau cover. At LEER, we looked at ways to
make it better, front to back and inside out. We engineered components with new innovations at every
point including our CYNC™ latching system (patented). The result is a soft rolling cover that’s unlike any
cover on the road today.
NOTICE TO INSTALLER: It is recommended you take time to read these instructions before installing the
cover even if already familiar with the product. Improvements are often made without prior notice. Al-
ways handle the cover and components with care to avoid damage. If you find a part missing or defective,
or if you have trouble installing this product, please have the model number ready (located on a tag under
the first panel) and call your dealer. When done, these instructions and warranty information must be giv-
en to the customer to keep.
NOTICE TO CUSTOMER: Before using this product, read the operating instructions, maintenance and
safety sections of this owner’s manual and save for future reference. Your new LEER tonneau must be
registered to make the warranty valid. Registration information can be found on the back page.
Patented and Patent Pending see LEER.com

2
TABLE OF CONTENTS
Master Carton Components ......................................................................2
Hardware Box Contents..............................................................................2
Pre-Preparaon ..........................................................................................3
Installing Rail System ..................................................................................3
Installing Clamps ........................................................................................3
Installing Cover...........................................................................................4-5
Adjusng for Tautness (If Needed) .............................................................5
Replacement Parts .....................................................................................6-7
Warranty Policy…....................................................................................... 8
MASTER CARTON COMPONENTS
- 1 SOFT COVER ASSEMBLY
- 1 HARDWARE PACKAGE (See Details Below)
- 1 EACH LEFT HAND RAIL
- 1 EACH RIGHT HAND RAIL
- 1 EACH BULKHEAD SEAL
Unpack components and inspect for missing or damaged components.
Open the truck’s tailgate and clean truck bed if dirty.
HARDWARE BOX CONTENTS
- 6 EACH CLAMP ASSEMBLY (STYLE VARIES PER CLAMP KIT)
- 2 EACH FRONT CROSSBAR HOLD DOWN
- 1 EACH 2.5MM ALLEN WRENCH
- 1 EACH 5MM ALLEN WRENCH
- 1 EACH 6MM ALLEN WRENCH
TOOLS
INCLUDED
Patented and Patent Pending see LEER.com

3
2
1
INSTALLATION INSTRUCTIONS
WASH TRUCK BOX
IF DIRTY
PLACE LEFT HAND RAIL NOTCH
FLUSH AS SHOWN. (INSTALL SAME ON RIGHT SIDE)
3
PRE-PREPARATION INSTALLING RAIL SYSTEM
INSTALLING CLAMPS
CLAMP SCREW
STEP 1:
USE THESE THREE LOCATIONS TO PLACE CLAMP IN-
SIDE BED CHANNEL RAIL AS SHOWN. TIGHTEN
LOWER SCREW BY HAND UNTIL CONTACT IS MADE.
(CLAMP KIT STYLES VARY)
STEP 2: TIGHTEN CLAMP SCREWS USING 5
MM ALLEN AS SHOWN. ONCE TIGHTENED
YOU MAY REMOVE LOWER SCREWS, RETAIN
THEM IF LATER ADJUSTMENTS ARE NEEDED.
(REPEAT STEPS FOR RIGHT HAND SIDE)
LOWER SCREW
Patented and Patent Pending see LEER.com
INSTALL BULKHEAD SEAL ON TRUCK
BULKHEAD IN LOCATION SHOWN

4
INSTALLATION INSTRUCTIONS
4INSTALLING THE COVER
PLACE FRONT CROSS BAR BOLTS INSIDE
RAIL SLOTS AS SHOWN ABOVE. LINE UP
COVER ASSEMBLY ON FOURTH TOOTH
AS SHOWN BELOW. FRONT SHIELD
SHOULD BE PULLED OUT. SEE ABOVE
FOR FASTENER ASSEMBLY SEQUENCE.
* REPEAT FOR OPPOSITE SIDE
1
2
3
4
PLACE BOLTS IN FRONT OPEN SLOT
AS SHOWN ABOVE.
Patented and Patent Pending see LEER.com

5
INSTALLATION INSTRUCTIONS
4INSTALLING THE COVER
FOLD DOWN THE COVER AS
SHOWN FOR CYNC LATCH
ENGAGMENT.
REMOVE CLIPS AND ROLL
DOWN COVER AS SHOWN.
5ADJUSTING FOR TAUTNESS OF COVER (IF NEEDED)
TIGHTEN COVER
(MOVE OVER TEETH
TOWARD FRONT OF BED)
LOOSEN COVER
(MOVE OVER TEETH
TOWARD REAR TAIL GATE)
Patented and Patent Pending see LEER.com

6
REPLACEMENT PARTS
IDENTIFIER DESCRIPTION QUANTITY ITEM NUMBER QTY ORDERED
ALEER SR250 CLAMP KITS 1 EACH
BFRONT PART KIT 1 EACH 208388
CCYNC LATCH KIT 1 EACH 209037
DREAR LOCK KIT 1 EACH 208389
ERAIL SEAL KIT 1 EACH
Patented and Patent Pending see LEER.com

7
REPLACEMENT PARTS
KITS A BOX CONTENTS
- 1 KIT CLAMP KIT ASSEMBLIES (STYLE VARIES PER CLAMP KIT)
- 1 EACH 2.5MM ALLEN WRENCH
- 1 EACH 5MM ALLEN WRENCH
- 1 EACH 6MM ALLEN WRENCH
- 1 EACH FRONT PART KIT
A
#206660 #206661
#209037
#208388
B
CD
#208389
LEER SR250 CLAMP KITS
FRONT PART KIT
CYNC LATCH KIT REAR LOCK KIT
#208933
#208930 #208940
#209038 #209039 #209040 #209042#209041 #209043
ERAIL SEAL KITS (INCLUDES BULKHEAD SEAL)
Patented and Patent Pending see LEER.com

8
WARRANTY AND MAINTENANCE
LIMITED LIFETIME WARRANTY POLICY
COVERAGE:
LEER®, a Division of Truck Accessories Group, LLC, warrants you, the original retail purchaser, that your LEERRSR 250 soft rolling tonneau
cover is free from defects in the material and workmanship. The warranty will void if the product has been damaged by accident, neglect,
abuse, inappropriate use, improper installation or acts of God. LEER may, at our sole discretion, either repair or replace products that prove
to be defective.
WARRANTY PERIOD:
This warranty shall apply for Limited Lifetime as long as the LEERRSR250 soft rolling tonneau is in the possession of the original purchaser
on original truck and a proof of purchase (original sales receipt) is submitted.
LIMITATIONS:
The above warranty shall apply only if ALL of the following conditions are met.
1. The original purchase only is covered and is not transferable.
2. The LEERRSR250 soft rolling tonneau cover is on the original owner’s truck.
3. The LEERRSR250 soft rolling tonneau cover is properly installed.
4. The LEERRSR250 soft rolling tonneau cover has not been modified.
5. Consequential damages, including damage to cargo or truck bed, are not covered.
NOT COVERED UNDER WARRANTY:
1. Blown Off Covers:
A. LEER will not warranty a LEERRSR250 soft rolling tonneau that comes off the truck while driving or by wind.
B. Consumer responsibility to check clamps before driving.
2. Paint damage to your truck.
3. Damage resulting from improper or careless unpackaging. Never open packaging with box cutter or any sharp instrument as it may
scratch or damage contents.
4. Damage caused by improper use, operation outside the products specifications, or use other than the cover’s intended application.
5. Failure to install and operate equipment according to the guidelines put forth in the installation manual.
6. Damage occurring during transit provided by 3rd party shipping, example UPS or FEDEX. Claims must be filed directly with 3rd party
shipper.
THIS EXPRESS LIMITED WARRANTY IS THE SOLE AND EXCLUSIVE WARRANTY PROVIDED BY TRUCK ACCESSORIES GROUP, LLC FOR THIS PROD-
UCT. LEER DOES NOT MAKE AND HEREBY DISCLAIMS ANY AND ALL OTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO
THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
REPLACEMENT PARTS:
Contact your LEER Authorized Retailer for a list of replacement parts and cost.
SAFETY & CARE TIPS:
1. Take care of your equipment.
2. Periodically check your clamps for proper tension and make sure they are clamped down before traveling.
3. When you are riding with the cover in the rolled open position, make sure the tie-down straps are fastened.
4. Periodic cleaning with mild soap and water only. Avoid use of abrasive pads or harsh cleaners as they can dull finish. Avoid use of chemi
cals and harsh fluids as they can damage vinyl and seals voiding the warranty.
CLAIMS:
If you have any warranty issues, please contact your dealer for assistance.
REGISTRATION:
Registering your LEERRSR250 is an important step to ensuring you get the best possible ownership experience. At the same time, we would
like to better understand how your truck fits into your life. Feedback from LEER owners helps us design products that better fit your needs.
REGISTER TODAY AT: http://www.leer.com/Leer-warranty-survey.
P/N: #207737
Patented and Patent Pending see LEER.com