Leica GPS900 Series User manual

Leica GPS900
User Manual
Version 2.0
English

2GPS900
Introduction
Introduction
Purchase Congratulations on the purchase of a GPS900 series instrument.
This manual contains important safety directions as well as instructions for setting
up the product and operating it. Refer to "9 Safety Directions" for further informa-
tion. Read carefully through the User Manual before you switch on the product.
Product
identification
The type and serial number of your product are indicated on the type plate. Enter the
type and serial number in your manual and always refer to this information when you
need to contact your agency or Leica Geosystems authorized service workshop.
Type: _______________
Serial No.: _______________

Introduction GPS900 3
Symbols used in
this manual
The symbols used in this manual have the following meanings:
)• The RX900 controller is available as RX900 or as RX900c. The name RX900 is used
througout the manual and may also represent the RX900c.
• A GPS900 real-time rover can only be made up of an ATX900 GG GNSS antenna
together with the RX900 controller, the GFU radio and the GHT56 holder.
• A GPS900 real-time reference station can only be set up using an ATX900 GG
GNSS antenna and the RX900 controller, the GFU radio and the GEV205 cable.
Type Description
Danger Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
Warning Indicates a potentially hazardous situation or an unintended use
which, if not avoided, could result in death or serious injury.
Caution Indicates a potentially hazardous situation or an unintended use
which, if not avoided, may result in minor or moderate injury
and/or appreciable material, financial and environmental
damage.
)Important paragraphs which must be adhered to in practice as
they enable the product to be used in a technically correct and
efficient manner.

4GPS900
Introduction
)
Trademarks • Windows and Windows CE are a registered trademark of Microsoft Corporation
• Bluetooth is a registered trademark of Bluetooth SIG, Inc
All other trademarks are the property of their respective owners.
The RX900 controller. The radio housing includes the
integrated GFU radio.

Table of Contents GPS900 5
Table of Contents
In this manual Chapter Page
1 Unpacking the Container 8
1.1 Container Contents 8
1.2 Components of the RX900 Controller 10
1.3 Components of the GHT56 Holder and GHT52 Clamp 12
1.4 Available Documentation and CD ROM Contents 13
2 Using the RX900 Controller 16
2.1 The Keyboard 16
2.2 The Screen Display 20
2.3 The Icons - Showing Receiver Status 22
2.4 The Symbols - Showing Receiver Settings 29
3 Using the ATX900 GG Antenna 32
3.1 Understanding Antenna Heights 32
3.2 The Mechanical Reference Plane, MRP 33
3.3 Measuring the Antenna Height for a Pillar Setup 34
3.4 Measuring the Antenna Height for a Tripod Setup 36
3.5 Measuring the Antenna Height for a Pole Setup 38
3.6 The LED Indicators on the ATX900 GG Antenna 40

6GPS900
Table of Contents
4 Turning On / Turning Off 42
4.1 Turning On/Off, Switching to Desktop 42
4.2 Operating by Keyboard or Touch Screen 45
5 Understanding the Main Menu 46
6 Setting Up and Starting Up 50
6.1 Setting Up as a Real-Time Reference 50
6.2 Setting Up as a Real-Time Rover 56
6.3 Connecting to the ATX900 GG Antenna with Bluetooth 65
6.4 Changing the Battery on the RX900 Controller 66
6.5 Changing the CompactFlash card on the RX900c Controller 68
6.6 Changing the Battery on the ATX900 GG Antenna 70
6.7 Essential Battery Operating Principles 72
6.8 Using Licence Keys 73
6.9 Checking and Adjusting the Circular Level of the Tribrach 76
6.10 Checking and Adjusting the Circular Bubble of the Pole 79
6.11 Guidelines for Correct Results with GNSS Surveys 80
7 Connecting a Computer with ActiveSync 82
8 Care and Transport 88
8.1 Transport 88
8.2 Storage 89

Table of Contents GPS900 7
8.3 Cleaning and Drying 90
9 Safety Directions 92
9.1 General Introduction 92
9.2 Intended Use 93
9.3 Limits of Use 95
9.4 Responsibilities 96
9.5 International Warranty, Software Licence Agreement 97
9.6 End User Licence Agreement EULA 99
9.7 Hazards of Use 102
9.8 Electromagnetic Compatibility EMC 111
9.9 FCC Statement, Applicable in U.S. 114
10 Technical Data 120
10.1 RX900 Technical Data 120
10.2 ATX900 GG Technical Data 124
10.2.1 Tracking Characteristics 124
10.2.2 Accuracy 127
10.2.3 Technical Data 128
10.3 GHT56 Technical Data 131
10.4 Conformity to National Regulations 133
10.4.1 RX900 133
10.4.2 ATX900 GG 135
Index 138

8GPS900
Unpacking the Container
1 Unpacking the Container
1.1 Container Contents
Description The main components required for the cableless GNSS real-time system are
combined in one transport container.
Container for
GPS900
and delivered
accessories
part 1 of 2 a) Radio housing
b) GRT146 carrier
c) GPS900 User Manual
d) RX900
e) Height hook
f) GHT58 tripod bracket
for radio housing
g) Tribrach
h) Adjusting pin
GPS900_002
a
b
c
d
e
f
g
h

Unpacking the Container GPS900 9
Container for
GPS900
and delivered
accessories
part 2 of 2
a) GEB211 batteries for ATX900
GG and RX900
b) GEV205 Y-cable
c) ATX900 GG
d) GHT56 holder for RX900
e) Stylus for touch screen
f) GHT52 clamp
g) Radio antennas
h) CD ROM
i) Radio housing
j) Tightening screw for GHT52
k) GEV173 ATX900 GG-RX900
cable
l) ATX900 GG
LeicaGPS900
LeicaGPS900
GPS900
_
001
a
b
c
d
e
f
g
h
i
j
k
l

10GPS900
Unpacking the Container
1.2 Components of the RX900 Controller
Upperside of
RX900
a) Touch screen
b) Keyboard
c) Hand strap bottom clips
d) LEMO port, with integrated USB port
GPS900_003
b
c
d
a

Unpacking the Container GPS900 11
Underside of
RX900
a) Bottom spring clip for pole holder
b) Top clips for pole holder
c) Hand strap top clips
d) Stylus for touch screen
e) Hand strap bottom clips
f) LEMO port, with integrated USB port
g) Battery compartment
For RX900c with CompactFlash card
compartment
A Bluetooth port is included inside RX900,
to facilitate connectivity to ATX900 GG.
GPS900_004
e
ac
f
bd
g

12GPS900
Unpacking the Container
1.3 Components of the GHT56 Holder and GHT52 Clamp
Components of the
GHT56 holder and
GHT52 clamp
The GHT56 holder and GHT52 clamp both consist of a number of components, as
shown in the diagram.
GHT52 clamp
a) Pole clamp
b) Clamp bolt
GHT56 holder
c) Tightening screw
d) Mounting arm
e) Clip-on-contacs for
connecting RX900
f) LED
g) Mounting plate
h) Battery compartement
i) Locking mechanism for
battery
j) Space for clip-on-housing
with LEMO port
GPS900_070
b
a
c
d
e
f
g
j
ih

Unpacking the Container GPS900 13
1.4 Available Documentation and CD ROM Contents
Available
product manuals
Three product manuals are available for GPS900:
Name of
manual
Description of manual Manual format
PRINTED PDF
User
Manual
All instructions required in order to operate the
product to a basic level are contained in the
User Manual. Provides an overview of the
product together with technical data and safety
directions.
99
Quick Guide Provides an overview of the product and
selected program functions.
9
Tutorial
Manual
Step-by-step instructions, explaining/showing
how to complete various survey tasks.
9
Technical
Reference
Manual
Overall comprehensive guide to the product and
program functions. Included are detailed
descriptions of special software/hardware
settings and software/hardware functions
intended for technical specialists.
9

14GPS900
Unpacking the Container
CD ROM contents The GPS900 CD ROM contains software and documentation specific to GPS900:
Type Description
Software System software
Language software
Application programs
GPS900 Simulation
Documentation GPS900 User Manual
GPS900 Tutorial Manual
GPS900 Technical Reference Manual
GPS900 Equipment List

Unpacking the Container GPS900 15

16GPS900
Using the RX900 Controller
2 Using the RX900 Controller
2.1 The Keyboard
Keyboard display
a) Function keys F1-F6
b) Alpha keys
c) CAPS
d) Hot keys F7-F12
e) SPACE, SHIFT
f) ENTER
g) Arrow keys
h) CE, ESC, USER, PROG
i) Numeric keys
j) Windows key symbol.
This is the Microsoft flag logo
located between PROG and ESC.
F2F1 F3 F4 F5 F6
F7
A S D F G H J K L
W
Q
E R
7 8 9
4 5 6
1 2 3
0 .
T Y U I O
P
Z X C V B N M
F8 F9 F10 F11 F12
CE ESC
USER PROG
ON
GPS900_005
a
b
g
f
e
c
d
h
i
SHIFT
SPACE
CAPS
OFF
PgDn
PgUp
ESC
PROG
ON
j
OFF

Using the RX900 Controller GPS900 17
Special Keys
Other Keys
Key Function
Hot keys F7-F12 User definable keys for access to any application, configura-
tion or function.
PROG (ON) If the receiver is off: press and hold for 2 s to turn it on.
If the receiver is on: press at any time to access the Programs
screen, where a program can be selected.
USER User definable menu for quick access anytime and access to
all STATUS panels.
Key Function
CAPS Switches between upper case and lower case letters.
CE Clears all entry at the beginning of user input.
Clears the last character during user input.
ENTER Selects the highlighted line and leads to the next logical
menu/dialogue.
Starts the edit mode for edit fields.
Opens a choicelist.

18GPS900
Using the RX900 Controller
Key combinations
ESC Leaves the current menu or dialogue without storing any
changes.
Turns receiver off when held for 2 s in the Main Menu screen.
SHIFT Switches between the first and the second level of function
keys.
SPACE Enters a blank.
Arrow keys Moves the focus on the screen.
Alpha keys To type letters.
Function keys F1-F6 Correspond to six softkeys that appear on the bottom of the
screen when the screen is activated.
Numeric keys To type numbers.
Key Function
Key Function
PROG plus USER Turns receiver off when held in the Main Menu screen.
SHIFT Pages up.
SHIFT Pages down.

Using the RX900 Controller GPS900 19
SHIFT PROG () Displays the Windows CE task bar and start menu.
Key Function

20GPS900
Using the RX900 Controller
2.2 The Screen Display
Screen
Elements
a) Time
b) Caption
c) Title
d) Screen area
e) Message line
f) Icons
g) ESC
h) CAPS
i) SHIFT icon
j) Softkeys
a
g
i
b
c
d
e
j
f
GPS900_006
h
Type Description
Time The current local time is shown.
Caption Shows location either in the Main Menu screen, under PROG
key or USER key.
Title Name of the screen is shown.
Screen area The working area of the screen.