Leigh Country TX 93480 User manual

STEP 3STEP 2
STEP 4 STEP 6STEP 5
I
G
H
D
E
F
C
K
J
A1 (TOP) = 3PCS A2 (BOTTOM) = 3PCS
B = 1PC
E = 1PC
G = 1PC Rudder
H = 1PC Fan Blades
I = 1PC Stop Nut
M4 X 0.4”
M6 X 1.6”
J = 9PCS
K = 6PCS
L = 3PCS
D = 1PC
C = 3PCS
F = 1PC
Windmill Legs
Star Platform
Windmill Head Screws
Top Mount Platform
Decor Cap
Side Panels
Needle (Screw into B)
Ground Stakes
I
G
H
A
D E
J K
L
L
L
L
G H I
F
B C
Tools Required for Assembly:
#2 Phillips Screwdriver
10” Adjustable Wrench
STEP 1
A
A1
A2
J
B
F
IMPORTANT: READ CAREFULLY BEFORE BEGINNING!
Make sure that all parts and hardware are present
before assembly.
Assemble on a non-marring and level surface
Do not completely tighten all nuts and bolts until
the bench is fully assembled.
WINDMILL 9FT. TRIPOD TEXAS FLAG
ITEM #: TX 93480
Secure the Needle (F) into the Top Mount Platform (B).
Secure the Top Mount Platform (B) to the top of the Legs
(A1) with the Screws (J). Connect top portion of Legs
(A1) to the bottom part (A2). Leg should face inwards.
Affix the Side Panel (C) into place between the Windmill
Legs (A), tighten with the Bolt & Nut (K).
Place the Directional Cap (E) on the Top Mount Platform
(B), lock into place with the Needle (F).
Assemble the Windmill Head (G, H, I), make sure the Stop
Nut (I) is screwed on well.
Note: The front hole of the Fan Blades (H) is larger than
the back hole.
Place the Windmill Head (G, H, I) on the Needle (F). Secure the
Windmill by inserting the Ground Stakes (L) through each
hole at the base of each legs.
Assembling
Affix the StarPlatform (D) on top of the Windmill Legs (A),
and tighten with the Screws (J).
PARTS AND HARDWARE LIST
Congratulations
on your assembly!
K

www.LeighCountry.com
© 2016 UGS Co., Inc. All Rights Reserved Patents Pending
Limited Warranty and Care Instructions
LIMITED ONE YEAR WARRANTY (NON-TRANSFERABLE)
This product is covered under United General Supply’s (UGS) one (1) year limited warranty. To the original purchaser
of this piece of furniture, cooler or accessory; UGS warrants that it will be free from defects in material and
workmanship for up to one year from the date of purchase under normal use and proper care.
Replacement of defective or missing parts will be sent at no charge to the customer for a period of 30 days from the
date of purchase. UGS will no longer be responsible for missing parts or hardware 30 days after date of purchase.
Freight, packaging, labor or material charges to and from our customer service center is not covered under the
warranty and is therefore the customer’s responsibility.
The limited warranty does not cover this piece of furniture, cooler or accessory for commercial purposes, abusive
use, damage by modification, freeze damage, rust, fading and issues caused by improper care.
For minor defects or missing parts/hardware, please contact customer service immediately upon purchase. Please do
not return product to the store unless the product is irreparable. A customer service agent may help determine
whether the damage is reparable and will provide further instructions.
For returns and refunds, please refer to your local store return policy with proof of purchase.
Proof of purchase (dated register receipt) will be required for warranty claims.
Proper Care Instructions
To clean the bench, use a mild soap and rinse with water. Dry off the bench completely with a soft cloth.
Durning a long periods of non-use, store furniture in the covered and dry place.
For the least maintenance, use under covered area.
Proof of purchase (dated register receipt) will be required for warranty claims. For faster service, please email
proof of purchase and photos to [email protected].
Customer Service may be reached Monday through Friday from 9:00a.m. to 5:00p.m. CST.
[email protected] OR 1-877-87LEIGHT (53444)
DISTRIBUTED BY:
UNITED GENERAL SUPPLY CO., INC.
HOUSTON, TX 77036