Leigh Country TX 94062 User manual

IMPORTANT: READ CAREFULLY BEFORE BEGINNING!
Make sure that all parts and hardware are present
before assembly.
Assemble on an a non-marring and level surface
METAL GLIDER WELCOME
ITEM #: TX 94062
WELCOME
PARTS AND HARDWARE LIST
1
1
2
2
2
5
5
A
A
B
B
B
B
C
C
C
C
C
C
C
B
C
E
E
E
F
DB
6
6
3
3
4
4
X 2PCS X 2PCS
X 1PC
X 4PCS
X 8PCSX 2PCS X 2PCS X 4PCS X 26PCS
X 8PCS X 14PCS
X 1PC X 1PC X 1PC
M6 x 50 M6 x 70 M6 x 60
NUT & BOLT NUT & BOLT NUT & BOLT
DS DL
DL
DL
DS
DL
STEP 1: STEP 2:
STEP 5:
STEP 3:
STEP 6:
STEP 4:
BACK
FRONT
1
4
1
Tighten all nuts and bolts
once every part and assembled
pieces are in place.
Congratulations
on your assembly!
Tools Included

www.LeighCountry.com
Limited Warranty and Care Instructions
ONE (1) YEAR LIMITED WARRANTY (NON-TRANSFERABLE)
This product is covered under United General Supply’s (UGS) one (1) year limited warranty. To the
original purchaser of this piece of furniture, cooler, or accessory; UGS warrants that it will be free from
defects in material and workmanship for up to one year from the date of purchase under normal use and
proper care.
Replacement of defective or missing parts will be sent at no charge to the customer for a period of 30 days
from the date of purchase. UGS will no longer be responsible for missing parts or hardware 30 days after
date of purchase. Freight, packaging, labor, or material charges to and from our customer service center
is not covered under the warranty and is therefore the customer’s responsibility.
The limited warranty does not cover this piece of furniture, cooler, or accessory for commercial
purposes, abusive use, damage by modification, freeze damage, rust, fading, and issues caused by
imporoper care.
For minor defects or missing parts/hardware, please contact customer service immediately upon
purchased. Please do not return product to the store unless the product is irreparable. A customer
service agent may help determine whether the damage is repairable and will provide further
instructions.
Proof of purchase (dated register receipt) will be required for warranty claims.
PROPER CARE INSTRUCTIONS
To clean the glider, use a mild soap and rinse with water. Dry off the glider completely with a soft cloth.
During long periods of non-use, store furniture in covered and dry place.
For the least maintenance, use under covered area.
Customer Service may be reached Monday through Friday from 9:00am to 5:00pm CST.
[email protected] OR 1-877-87LEIGH (53444)
© 2015 UGS Co., Inc. All Rights Reserved
DISTRIBUTED BY:
UNITED GENERAL SUPPLY CO., INC.
HOUSTON, TEXAS 77036