Leigh Country TX94094 User manual

INSTRUCTION MANUAL
PORCH DOUBLE GLIDER W/TRAYS
Product Dimensions:
L: 75.5”x W: 28.4”x H: 37.8”
Product Weight:
56.5 lbs
ITEM#: TX 94094
IMPORTANT: READ CAREFULLY BEFORE BEGINNING!
Make sure that all parts and hardware are present
before assembly.
Assemble on a non-marring and level surface.
Tools Required for Assembly Tools Included
Mallet
Socket & Wrench Phillips
Screwdriver
X 2PCS
Power tools are not recomended while assembling this product.

STEP 1: STEP 2:
1
FL
FL 3
DD
D
FL
BACK
FRONT
1
PARTS AND HARDWARE LIST
1 2
6
AB C
D E
G
3
5
X 2PCS
X 1PC
X 2PCS
X 1PC
X 12PCS
X 26PCS
X 2PCS
X 2PCS
X 4PCS
X 2PCS X 1PC
NUT & BOLT
NUT & BOLT BOLT
X 4PCS
7
X 1PC
NUT & BOLTNUT & BOLT
X 2PCS
X 2PCSX 8PCS
X 14PCS
X 8PCSX 42PCS
X 4PCS
4
X 2PCS
8
H
I
9
10
11
12
SCREW
X 13PCS
M5 x 45 M6 x 70 M6 x 80
M6 x 60 M6 x 10
FLFMFS
Please note the Stopper (FL) goes into the second hole.
1
2
H
H
RIGHT LEFT
FRONT
L: 41.3”
L: 48”
L: 1.8” L: 2.8” L: 3.2”
L: 2.4”
L: 0.4”
L: 0.4” L: 0.5” L: 0.9” L: 1.2”
* B & D & FM do
not come
attached to H X 8PCS
DB
FM
FM
D
B
FM
2
1
B
FM
+

STEP 3: STEP 4:
STEP 5:
STEP 6:
STEP 7:
Congratulations
on your assembly!
C
C
B6
4
8
A
A
7
9
10
12
11
4
5
E
D
5
G
C
FS
42
Tighten the bolts & nuts to the metal frame.
Holes are not pre-drilled.
Secure center brace in the
back of slats with Screws (G)
C
FS
+
C
FS
+
C
FS
+
Tighten all nuts, bolts, and screws once
every part and assembled pieces are in
place.
Use Plastic Caps (Part I) to cover the nuts
of (B, C, & D).
Washer
Make sure the washers
are applied during assembly.
Final Step
I
Wood Wood
Tighten until it’s flush.

© 2014 UGS Co., Inc. All Rights Reserved
www.LeighCountry.com
DISTRIBUTED BY:
UNITED GENERAL SUPPLY CO., INC
HOUSTON, TX 77036
Limited Warranty and Care Instructions
LIMITED ONE YEAR WARRANTY (NON-TRANSFERABLE)
PROPER CARE INSTRUCTIONS
Customer Service may be reached Monday through Friday from 9:00a.m. to 5:00p.m. CST.
[email protected] or 1-877-875-3444
If left untreated, wood will naturally weather. During long periods of non-use, store furniture in cov-
ered and dry place.
To clean the furniture, use a mild soap and rinse with water. Dry off the furniture completely with a
soft cloth.
For the least maintenance, place your furniture or cooler under a covered area.
This product is covered under United General Supply’s (UGS) one (1) year limited warranty. To the
original purchaser of this piece of furniture, cooler or accessory; UGS warrants that it will be free from
defects in material and workmanship for up to one year from the date of purchase under normal use and
proper care.
Replacement of defective or missing parts will be sent at no charge to the customer for a period of 30
days from the date of purchase. UGS will no longer be responsible for missing parts or hardware 30 days
after date of purchase. Freight, packaging, labor or material charges to and from our customer service
center is not covered under the warranty and is therefore the customer’s responsibility.
The limited warranty does not cover this piece of furniture, cooler or accessory for commercial
purposes, abusive use, damage by modification, freeze damage, rust, fading and issues caused by improper
care.
For minor defects or missing parts/hardware, please contact customer service immediately upon
purchase. Please do not return product to the store unless the product is irreparable. A customer service
agent may help determine whether the damage is reparable and will provide further instructions.
For returns and refunds, please refer to your local store return policy with proof of purchase.
Proof of purchase (dated register receipt) will be required for warranty claims.
ASSEMBLY WITH POWER TOOLS MAY VOID THIS WARRANTY.