Leigh Country TX 93548 User manual

Item No.: TX 93548
Instruction Manual
Read the instructions before use of this product.
For warranty information, please refer to the back page of
this instruction manual.
Please keep this instruction manual for future reference.
TX 94104
Metal Bench Fleur De Lis
TX 94101
Metal Bench Welcome
TX 93556
Metal Bench AGGIES
TX 93554
Metal Bench TEXAS

PARTS & HARDWARE LIST
BACK PANEL
SEAT PANEL
ARM FRAME
BOLT M6 x 2”
BOLT M6 x 2.7”
HEX NUT
PLASTIC NUT COVER
WRENCH
A
B
C
D
E
F
G
H
8
8
2
1
1
2
4
4
PART# DESCRIPTION QUANTITY
Please make sure that every piece of furniture and all hardware
are present before assembling this bench.
Parts Detail
GH
1. (SEE FIGURE 1) Take Seat Panel (B) and align the holes to the holes
of the Arm Frame (C) and secure by inserting Bolts (D) through the Arm
Frame then Seat Panel. Secure the Bolts (D) with the Hex Nuts (F) on
the inside of the Seat Panel. Repeat for the other the Arm Frame (C).
Do not fully tighten the Nuts and Bolts.
2. Slide Back Panel (A) between the Arm Frames (C) and align the holes.
Secure by inserting Bolts (E) through the Arm Frame then Back Panel (A).
Secure the Bolts (E) with the Hex Nuts (F) on the inside of the Back Panel.
Repeat for the other the Arm Frame (C).
3. Once all Hex Nuts and Bolts are secured, tighten all Bolts (D&E) with
the Wrench (H).
4. Slide Plastic Nut Covers (G) over all exposed bolt ends.
ASSEMBLY INSTRUCTIONS
Until every part and piece is set and secured in
place, do NOT secure the nuts tightly together.
Figure 1
CAUTION:
G G
G
G