LevelOne FCS-1010 User manual

LevelOne IP Camera Quick Installation Guide
Quick Installation Guide
This QIG applies to：FCS-1010/1030/1040/1050/1060/1070/3000
WCS-2010/2030/2040/2060/2070
All manuals and user guides at all-guides.com
all-guides.com

Software Installation
Please insert the CD-ROM that comes with the LevelOne IP camera packet.
The installation page should pop up. If you do not see the pop up, please go into the CD-ROM directory and click on
AutoRun.exe
Click on “Install Software”.
Click on “Installation Wizard”.
All manuals and user guides at all-guides.com

Please follow the wizard by clicking “Next”.
Click on “Finish” to complete the installation.
All manuals and user guides at all-guides.com

Click on the Installation Wizard on your Windows Desktop.
Please choose the IP Camera by MAC address and click “Link to selected device”.
All manuals and user guides at all-guides.com

Initial login will have a Window pop up, please click “yes”.
Install Active X.
Complete installation.
All manuals and user guides at all-guides.com

Wireless installation
This applies to WCS-2010/2030/2040/2060/2070
Login to the web configuration page, click on Wireless LAN.
Please press “save” after configuration, and then unplug your power cord and RJ-45 LAN cable. Insert
Power cord, do not insert RJ-45 LAN cable. LevelOne IP camera should automatically connect to the
preset AP.
All manuals and user guides at all-guides.com
all-guides.com

Surveillance System QIG
Please insert the CD-ROM that comes with the LevelOne IP camera packet.
The installation page should pop up. If you do not see the pop up, please go into the CD-ROM directory and click on
AutoRun.exe.
Click on “Installation Software”.
Click on IP CamSecure.
All manuals and user guides at all-guides.com

Choose the Language, click “next”.
Click “Next”.
Click On I accept the terms and license agreement, click “Next”.
All manuals and user guides at all-guides.com

Please enter User Name and Company Name.
Choose Complete Install. “Next”.
All manuals and user guides at all-guides.com

Click on “Install”.
Click “Finish” to complete Installation.
All manuals and user guides at all-guides.com

Start – Program – LevelOne - IP CamSecure - Main Console.
Please enter the password and remember it.
All manuals and user guides at all-guides.com
all-guides.com

Click on Config – Setting.
Click on Camera Tab,, Insert.
All manuals and user guides at all-guides.com

Enter the IP address or DDNS of your IP camera, then user name and password. Click on “Auto
Detect”.
Click on OK when finishing Auto Detect.
All manuals and user guides at all-guides.com

Complete.
IPCam Secure can support up to 32 Channels.
All manuals and user guides at all-guides.com