LevelOne WAP-6150 User manual

LevelOne
User Manual
WAP-6150
300Mbps Wireless Gigabit PoE Access Point

2
TABLE OF CONTENTS
CHAPTER 1 INTRODUCTION...............................................................................................................................5
1.1 CONTENTS LIST .............................................................................................................................................5
1.2 HARDWARE INSTALLATION............................................................................................................................6
1.2.1 WARNING..................................................................................................................................6
1.2.2 SYSTEM REQUIREMENTS.......................................................................................................6
1.2.3 Hardware Configuration .............................................................................................................8
1.2.4 LED Indicators............................................................................................................................9
1.2.5 Button Indicators ..................................................................................................................... 10
CHAPTER 2 GETTING STARTED.......................................................................................................................... 11
2.1 EASY SETUP BY CONFIGURING WEB UI ...................................................................................................... 11
2.2 USE WEC BUTTON TO SETUP WIRELESS PROFILES.....................................................................................15
CHAPTER 3 MAKING CONFIGURATIONS....................................................................................................17
3.1 BASIC NETWORK.........................................................................................................................................19
3.1.1 Ethernet LAN........................................................................................................................... 19
3.1.2 Wireless................................................................................................................................... 20
3.1.3.1 Wireless Setup..............................................................................................................................20
3.1.3.1.1 AP Only Mode .........................................................................................................................................20
3.1.3.1.2 WDS Hybrid Mode ..................................................................................................................................22
3.1.3.1.3 WDS Only Mode......................................................................................................................................24
3.1.3.1.4 Universal Repeater Mode.........................................................................................................................25
3.1.3.2 Advanced Wireless Setup.............................................................................................................26
3.1.3.2.1 Advanced RF Module1 Settings...............................................................................................................26
3.1.3.2.2 Advanced RF Module2 Settings...............................................................................................................27
3.1.3 IPv6 ......................................................................................................................................... 29
3.2 ADVANCED NETWORK................................................................................................................................. 30
3.2.1 Firewall.................................................................................................................................... 30
3.2.1.1 MAC Address Control ...................................................................................................................30
3.2.2 Management............................................................................................................................ 31
3.2.2.1 UPNP............................................................................................................................................31
3.2.2.2 SNMP............................................................................................................................................31
3.3 SYSTEM .......................................................................................................................................................34
3.3.1 System Information ................................................................................................................. 34
3.3.2 System Status ......................................................................................................................... 34
3.3.2.1 Web Log........................................................................................................................................34
3.3.2.2 Syslog...........................................................................................................................................35

3
3.3.2.3 Email Alert.....................................................................................................................................35
3.3.3 System Tools........................................................................................................................... 36
3.3.3.1 Change Password.........................................................................................................................36
3.3.3.2 FW Upgrade..................................................................................................................................37
3.3.3.3 System Time.................................................................................................................................38
3.3.3.4 Others...........................................................................................................................................39
3.3.4 MMI.......................................................................................................................................... 40
3.3.4.1 Web UI..........................................................................................................................................40
CHAPTOR 4 TROUBLESHOOTING ...................................................................................................................41
APPENDIX A. LICENSING INFORMATION.........................................................................................................45

4
Copyright
The contents of this publication may not be reproduced in any part or as a whole, stored,
transcribed in an information retrieval system, translated into any language, or transmitted
in any form or by any means, mechanical, magnetic, electronic, optical, photocopying,
manual, or otherwise, without the prior written permission.
Trademarks
All products, company, brand names are trademarks or registered trademarks of their
respective companies. They are used for identification purpose only. Specifications are
subject to be changed without prior notice.
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against radio interference in a commercial environment. This
equipment can generate, use and radiate radio frequency energy and, if not installed and
used in accordance with the instructions in this manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause
interference, in which case the user, at his own expense, will be required to take whatever
measures are necessary to correct the interference.
CE Declaration of Conformity
This equipment complies with the requirements relating to electromagnetic compatibility,
EN 55022/A1 Class B.

5
Chapter 1 Introduction
Congratulations on your purchase of this outstanding product: BDP77A-001 WiFi 4G
Business Gateway. This device is specifically designed for those who need to have the
data, voice, video and file sharing services beyond his home and office. It provides a
complete solution for Internet surfing and broadband sharing. Instructions for installing
and configuring this product can be found in this manual. Before you install and use this
product, please read this manual carefully for fully exploiting the functions of this product.
1.1 Contents List
Items
Description
Contents
Quantity
1
WAP-6150
1pce
3
2.4G WiFi Antenna
2pce
4
Power Adapter
1pce
5
RJ45 Cable
1pce
6
CD
1pce

6
1.2Hardware Installation
1.2.1 WARNING
1.2.2 SYSTEM REQUIREMENTS
Network Requirements
An Ethernet-based Cable or DSL modem
IEEE 802.11n or 802.11b, g wireless clients
10/100 Ethernet
Web-based Configuration Utility
Requirements
Computer with the following:
Windows® , Macintosh, or Linux-based
operating system
An installed Ethernet adapter
Browser Requirements:
Internet Explorer 6.0 or higher
Chrome 2.0 or higher
Firefox 3.0 or higher
Safari 3.0 or higher (with Java 1.3.1 or
higher)
Windows® Users: Make sure you have the latest
version of Java installed. Visit www.java.com to
download the latest version.
Do not use the product in high humidity or high
temperatures.
Do not use the same power source for the Product
as other equipment. Only use the power adapter that
comes with the package. Using a different voltage
rating power adaptor may damage the router.
Do not open or repair the case yourself. If the
Product is too hot, turn off the power immediately
and have it repaired at a qualified service center.
Place the Product on a stable surface and avoid
using this product and all accessories outdoors.
Attention

7
CD Installation Wizard Requirements
® ®



8
1.2.3 Hardware Configuration
Rear View:
WEC Button Reset Button LAN Port LAN(PoE) Port Power Jack

9
1.2.4 LED Indicators
LED
Description
Status
Color: Amber / Green
Soild Amber: Device druing power-on process
Soild Amber: Device druing power-on process
Soild Green: Completion of power on
Blinking Amber: Device is crashed and under recovery mode
Blinking Green: The system is detective, such firmware upgrades fail
Blink Amber led while pinging IP address of the device.
Light Off: The device is power-off
2.4GHz
Master Mode: Green in Normal Status
Slave Mode: Amber in Normal Status
LED in flash: data packet transferred
PoE
LED in flash: data packet transferred
LAN
LED in flash: data packet transferred

10
1.2.5 Button Indicators
Button
Description
WEC(Wireless Easy
Connection)
The device has to take about 36 sec to change Mode completely.
Step1:Press WEC Button about 9~10 seconds (Watch Status
LED to flash about 9~10 times)
Step2: WiFi LED Dark then release button
Step3: Wait for about 25~26 seconds to change Wi-Fi LED
Color:
The procedure of WiFi LED:
Master to Slave : “Green” (9th ~10th sec)”Dark”(11th~36th sec)
“Amber” color
Slave to Master: "Amber"(9th ~10th sec)”Dark” (11th~36thsec)
"Green" color
Negotiate
Configuration
Click WEC Button (about 1second) of master AP and any slave
AP as one pair simultaneously.
Reset Button
Press (6) sec to reset to factory default settings.

11
Chapter 2 Getting Started
Please use windows EZ setup utility or Web UI wizard to enter the setup process.
2.1 Easy Setup by Configuring Web UI
You can also browse web UI to configure the device. Firstly you need to launch the Setup
Wizard browser first and then the Setup Wizard will guide you step-by-step to finish the
basic setup process.
Browse to Activate the Setup Wizard
Type in the IP Address (http://192.168.1.1)
Type the default password ‘admin’ in the System
Password and then click ‘login’ button.

12
Select “Wizard” for basic settings in a simple way.
Or, you can go to Basic Network / Advanced Network / Applications / System to setup
the configuration by your own selection.
Press “Next” to start the Setup Wizard.
Configure with the Setup Wizard
Step 1
You can change the password of
administrator here.

13
Step 2
Entry LAN IP Address.
Step 3-1
Wireless setting.
Step 3-2
Wireless authentication and
encryption.
Step 4
Check the information again.

14
Step 5
System is applying the setting.
Step 6
Click finish to complete it.

15
2.2 Use WEC Button to Setup Wireless Profiles
WEC Button is Wireless Easy Connection. There are 2 purposes for this Button.
One is to switch AP into Master or Slave Mode.
However, Main purpose of Slave AP is to get Wireless profile of Master AP to extend
connective distance w/o login configured Web.
Access Point is in Master Mode
When Access Point is Master Mode, LED of 2.4G is Green.
Generally speaking, the settings of Master AP can work in your Network environment.
※Device Network IP Address depend as current Settings.
Access Point is in Slave Mode
When Access Point is Slave Mode, LED of 2.4G is Amber.
New deployed or reset-to-default Access points have to configure Wireless setting so
that can work current network environment.
※Device Network IP Address is DHCP Client in Slave Mode.
Please check if DHCP Server exists in your Network Environment.
If Not, please change to Master Mode after getting Wireless Profiles, it will be Default IP
“Static IP”.(Due to New deployed or reset-to-default Access point.)

16
Configure Slave AP via WEC Button
Step 1
Check 2.4GHz LED of Access Point which acts as Master Mode. It should be Green. If not,
please use WEC button to switch into Master Mode.
Step 2
Check 2.4GHz LED of Access Point which acts as Slave Mode. It should be Amber. If not,
please use WEC button to switch into Slave Mode.
Step 3
Click WEC Button (about 1second) of master AP and any slave AP as one pair
simultaneously
Step 4
WiFi LED of Master and Slave AP will flash and Negotiate WiFi Profile Configuration. This
Process will finish within 30~60 sec. Then WiFi LED will be Solid.
※If Negotiation failed or Master or Slave AP don’t existed, WiFi LED will Flash 2 min
then will be Solid. Please try again

17
Chapter 3 Making Configurations
Whenever you want to configure your network or this device, you can access the
Configuration Menu by opening the web-browser and typing in the IP Address of the
device. The default IP Address is: 192.168.1.1.In the configuration section you may want
to check the connection status of the router, to do Basic or Advanced Network setup or to
check the system status. These task buttons can be easily found in the cover page of the
UI (User Interface).
Enter the default password “admin” in the System Password and then click ‘login’
button.

18
Afterwards, you can go Wizard, Basic Network, Advanced Network, Application or
System respectively on left hand side of web page.
Note: You can see the Connection Status screen below after you logged in.
Note : You can see all the status of this device in the ‘Status’ main menu section.

19
3.1 Basic Network
You can enter Basic Network for Ethernet LAN and Wireless settings as the icon here
shown
3.1.1 Ethernet LAN
This device supports two types as Follows:
Static IP: Allow a device to act as a Static host. If you need Static host and please
entry IP Address.
DHCP: Allow a device to act as a host requesting configuration parameters, such as
an IP address from a DHCP server.
Note: Please check if there is DHCP server in your Network, first.

20
3.1.2 Wireless
Wireless settings allow you to set the WLAN (WiFi) configuration items. When the
wireless configuration is done your WiFi LAN is ready to support your local WiFi
devices such as your laptop PC, wireless printer and some portable wireless
devices.
There are 2 RF Modules on this device.
RF Module1 is 2.4GHz Wireless Module and RF Module2 is 2.4G Selectable
Module.
3.1.3.1 Wireless Setup
There are several wireless operation modes provided by this device. They are: “AP
Only Mode”, “WDS Hybrid Mode”, “WDS Only Mode”, and “Universal Repeater
Mode”. You can choose the expected mode from the list.
3.1.3.1.1 AP Only Mode
When acting as an access point, this device connects all the wireless stations to a
wired network and the WAN Port is disabled consequently.