Leviton OSWLR-IOW User manual

0
0
16.6
16.6
SIDE VIEW
TOP VIEW
OSWLR-I0W
Field of View (in feet)
14 42 71 100
10
0
Occupancy Sensor
Infrared Aisle (Long Range) Sensor OSWLR-IOW
The OSWLR-ISensor combines PIR
technology with a microprocessor
based digital architecture. By eliminating
false triggering, the sensor provides
atrouble-free “install and forget”
solution for lighting control.
THE OSWLR-I OCCUPANCY SENSOR
•PASSIVE INFRARED TECHNOLOGY (PIR)
•USE IN AISLES, LONG CORRIDORS AND HALLWAYS
•SIMPLE, FAST INSTALLATION
•SELF-ADJUSTING, SELF-CALIBRATING
•PHOTOCELL CONTROL
•MULTIPLE SENSOR AND POWER PACK CONNECTIONS
•24VDC, CLASS 2 LOWVOLTAGE WIRING
•“TWIST-AND-LOCK BRACKET” INCLUDED
GENERAL OPERATION
Specifically designed for long, relatively narrow spaces
such as hallways and corridors, the OSWLR-I Occupancy
Sensor provides long range and high sensitivity.
The OSWLR-I Occupancy Sensor is a “long range”
lens. This lens provides coverage up to 100 ft. when
mounted 10ft. above the floor.Can be mounted
lower if needed.
The mounting base, provided with the sensor, allows
quick and easy mounting in corners, on walls or on ceil-
ings. The most common applications are factory storage
areas, warehouse aisles and corridors.
FEATURES
Fast, Simple Installation: Easy base mount, three
wire connection (low voltage) and twist-and-lock detector
attachment.
Self-Adjusting: Internal microprocessor continually
analyzes, evaluates and adjusts the infrared sensitivity.
Performance is kept at a maximum and user complaints
are eliminated.
Flexible Base Mounting: Supplied twist-and-lock base
mount permits fast alignment. Supplied cover hides mount-
ing hardware and wires. Can be used with raceways for
hard surface installing. Wall or ceiling mount.
Range & Coverage: Up to 100 ft. for gross body motion
or forklift. Max. 14 feet wide.
Self Adjusting Timer: Timer is factory set at 10 minutes. User can easily
select 30s - 30 min using internal controls. Sensor may increase timer automati-
cally through self-adapting features to meet room or occupancy patterns.
Ambient Light Recognition: Aphotocell prevents lights from turning
on when the room is adequately lit by natural light. Both “occupied” and
low-light-level and occupied” lights-on control wires are supplied.
Non-Volatile Memory: Learned and adjusted settings saved in protected
memory are not lost during power outages.
OSWLR-IOW
1
Leviton Mfg. Co., Inc.
59-25 Little Neck Pkwy • Little Neck, NY 11362-2591 • Tech Line: 1-800-824-3005 • Fax: [phone]
Visit our Website at: www.leviton.com
JOB NAME:
JOB NUMBER:
CATALOG NUMBERS:
SPECIFICATION SUBMITTAL

Mounting
Base
Long
Range
Lens
Base Cover
4.67 inch
4.23 inch
6.43 inch
Sensor
2.80 Inch
PRODUCT SPECIFICATIONS
Hot (Black)
Neutral (White)
Load
Blue
(Control)
Black
Black
Red (24VDC)
Blue
Blue
Red
Blue*
(occupancy)
Blue*
(occupancy)
Gray*
(photocell +
occupancy)
Gray*
(photocell +
occupancy)
White
Black
White
Black
Red
Black
Line
120/277/347VAC
60Hz
Sensor
OSPxx Series Power Pack
NC-Brown
NO-Brown/White
Common-Green
To HVAC
System
CONTROLS
Infrared Sensitivity: 0to100%: red knob (factory setting: 75%)
Photocell: Blue knob 20 to 3,000 Lux. Factory set at 3,000 Lux -
(disable photocell).
INDICATORS
Red LED Lamp: Infrared motion.
SPECIFICATIONS
Adaptive Functions: Auto reset from test mode, self-adjusting time delay.
Learned occupancy patterns.
Construction: Housing: high-impact, injection molded plastic. Color coded wire
leads are 6” long (16.24cm).
Size & Weight: 6”H x 2”W x 1.5”D, 6 ounces (Excluding mounting hardware).
Infrared Sensing: High sensitivity 9.8 micron detector dual element.
Lens: multi element, long range.
Mounting Bracket: Wall or ceiling mounted, twist-and-lock swivel base.
Color: White.
Power Requirements: 24 VDC, 20 mA from the Cat. OSPxx power pack or
OPB15 Power Base Adapter.
Output: 24 VDC active high logic control signal with short circuit protection.
Operating Environment: 32˚Fto 104˚F, 0% to 95% relative humidity,
non-condensing. For indoor use only.
Warranty: 5years.
PHYSICAL WIRING
Models
Part Number Lens Type Coverage Additional Features
OSWLR-ILong Range 100’, 14’ Wide @ 10 ft. Height Photocell
ADJUSTMENT RANGE
85°
60°
OSWLR-IOW
.........................
2
Leviton Mfg. Co., Inc.
59-25 Little Neck Pkwy • Little Neck, NY 11362-2591 • Tech Line: 1-800-824-3005 • Fax: [phone]
Visit our Website at: www.leviton.com
JOB NAME:
JOB NUMBER:
CATALOG NUMBERS:
SPECIFICATION SUBMITTAL
Product
Specifications
G-7733/E7 sw
MOUNTING BRACKET
DIP switch settings
Switch Switch Functions Switch Settings
Bank A OFF ON
A1 N/A
A2 N/A
A3 Manual Mode Auto Adapting Enabled Auto Adapting Disabled
A4 Walk-Thru Disable Walk-Thru Enabled Walk-Thru Disabled
Bank B
B1 Override to On Auto Mode Lights forced On
B2 Override to Off Auto Mode Lights forced Off
B3 Test Mode OFF’ON’OFF Enter/Exit Test Mode
B4 LED Disable LEDS Enabled LEDS Disabled
*When the photocell function is not being used, connect the Blue Occupancy Sensor lead to the
Blue Power Pack lead. When using the Photocell function, connect the Gray Occupancy Sensor lead
to the Blue Power pack lead–Do not use the Blue Occupancy Sensor lead for the photocell function.