Leviton Enocean WSTLT-9D0 User manual

ENOCEAN CONTROL TRANSMITTER
Power Input: 100-277 VAC, 50/60 Hz
Cat. No. WSTLT-9D0 DI-001-WSTLT-00B
WARNINGS AND CAUTIONS:
• TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER at circuit breaker or fuse and test that power is off before wiring!
• To be installed and/or used in accordance with appropriate electrical codes and regulations.
• If you are unsure about any part of these instructions, consult an electrician.
• This product is intended only for use indoors and in dry locations.
NOTES:
• For use with Leviton®LevNet RF™ 902 MHz products.
• It may be more convenient to link the wireless controls to the Control Transmitter prior to final installation.
DESCRIPTION
Use the Control Transmitter to wirelessly bridge control from one circuit to another.
The Control Transmitter monitors any line voltage circuit and broadcasts the status
to wirelessly control one or more circuits connected to compatible receivers. Use the
Control Transmitter with hardwired switches, occupancy sensors or light sensors to
extend the controlling capacity of the sensors beyond the wires.
FEATURES
• Easy-to-use - eliminates switch-leg runs.
• Reliable range - unique ID of each control transmitter activates only the intended
receiver(s).
• Saves energy - conserves energy and saves money by using the control
transmitter in load shedding or energy-efficient HVAC control applications;
connects HVAC, lighting, or other devices to a relay receiver to turn them OFF and
ON automatically in sync with any device connected to a control extender.
• Simple wireless control - economy HVAC controls, interlocked motor control, and
secondary circuit follows power status of primary circuit.
• Control the way you want it - controls one or multiple new devices with an
existing switch and senses power state of one device, and wirelessly controls a
receiver connected to another device.
COMPATIBLE DEVICES
• WSD05-9D0
• WSD20-9D0
• WSP20-9D0
• WSS20-G9N
• WSS20-N9N
• WSG15-D9W
• WSG15-S9W
CERTIFICATIONS
• ETL: UL 60730 (U.S.)
• ETL: CSA c22.2 no.14-05 (Canada)
• CE: IEC 60730
• ETL: UL 2043 (Plenum)
• IEC 61000-4-5 (Surge)
• FCC: SZV-STM300U (US)
• IC: 5713A-STM300U (Canada)
EQUIPMENT NEEDED FOR INSTALLATION
• Slotted/Philips Screwdriver
• Wire Nuts/ Connectors
• Electrical Tape
CHOOSE THE OPTIMAL MOUNTING LOCATION
The long term reliability and wireless performance of the Relay is strongly influenced by
the mounting location. Choose a mounting location carefully. For best radio performance:
• Straighten antenna out and away from metal.
• Create separation distance away from interfering electronics such as fluorescent
tube ends, electronic transformers/power supplies, motors, etc.
• Avoid mounting inside metal enclosures.
• Obstructions of metal, concrete and dense building materials will reduce the range.
Mount higher and away from obstructions to maximize the range.
• Confirm operating environment does not exceed temp. or humidity specifications.
• Site survey tools are available to help fine tune wireless communications.
INSTALLATION
1. WARNING: TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER at circuit
breaker or fuse and test that power is off before wiring!
2. PLAN: Identify best mounting locations for receiver and transmitter. Perform
range test to confirm operation prior to installation.
3. CONNECT: Connect the Control Transmitter to circuit following wiring diagram
and local electrical codes. Restore power.
4. LINK: Follow Instructions provided with receiver. Press and release MENU button
to send Link signal.
5. TEST: Use the Sensor Link Test Mode (below) to test operation.
LINKING INSTRUCTIONS
Refer to the Receiver installation guide for Linking instructions. Press and release the
MENU button to send a Link signal during the linking process.
SENSOR LINK TEST MODE
Some receivers support Sensor Link Test Mode. If supported, after Linking, press the
MENU button on the Control Transmitter 5 times to activate the Sensor Link Test Mode
in any linked receivers. Subsequent presses of the MENU button will cause receivers
to toggle:
1) to confirm that the Control Transmitter is linked.
2) to test the reliability of wireless communications.
Receivers will time out of Sensor Link Test Mode after 60 seconds of inactivity.
SPECIFICATIONS
Frequency:
902 MHz
Range:
50-150 feet (typical)
Power Input: 100-277 VAC 50/60 Hz
Power Consumption: <0.5 W @ 120 VAC
Output: Wireless Control Signal
Transmit EEP: A5-3F-01, (default)
MENU button transmits Link Packet
Addressing: Factory set unique ID
(1 of 4 Billon)
Operating Temp:
+32˚ to +122˚ F (0˚ to +50˚ C)
Storage Temp:
-4˚ to +176˚ F (-20˚ to +80˚ C)
Humidity: 10-95% non-condensing
DIMENSIONS
CONTROL
TRANSMITTER
1.60”
(34.8 mm)
2.61”
(66.29 mm)
1.73”
(44 mm)
2.11”
(54 mm)
1.09”
(27.7 mm)
EEPS:
1 - A5-3F-01 - Control Extender (default)
English
INSTALLATION
WEB VERSION

BLACK
GROUND
NEUTRAL
GREEN OR BARE
WHITE
BREAKER PANEL BREAKER PANEL
LINE
CONTROL
TRANSMITTER
BLACK
GROUND
NEUTRAL
GREEN OR BARE
WHITE
LINE LOAD
AC Contact such as:
• Single Pole Switch
• Motion Sensor
• Time Clock
• Relay Panel
Antenna
CONTROL
RECEIVER
Antenna
NEUTRAL
WHITE
BLACK
LINE
BLACK
LINE
NEUTRAL
WHITE
BLUE
RELAY
BLUE
RELAY
Control Transmitter sends signal
to Control Receivers up to 150 feet away.
WIRING DIAGRAM
MENU
SELECT
MENU
SELECT
© 2015 Leviton Mfg Co., Inc. DI-001-WSTLT-00BFor Technical Assistance Call: 1-800-824-3005 (U.S.A. Only) www.leviton.com
LIMITED 5 YEAR WARRANTY AND EXCLUSIONS
Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the time of its sale by Leviton is free of defects in materials and workmanship
under normal and proper use for five years from the purchase date. Leviton’s only obligation is to correct such defects by repair or replacement, at its option. For details visit www.
leviton.com or call 1-800-824-3005. This warranty excludes and there is disclaimed liability for labor for removal of this product or reinstallation. This warranty is void if this product
is installed improperly or in an improper environment, overloaded, misused, opened, abused, or altered in any manner, or is not used under normal operating conditions or not in
accordance with any labels or instructions. There are no other or implied warranties of any kind, including merchantability and fitness for a particular purpose, but if any implied
warranty is required by the applicable jurisdiction, the duration of any such implied warranty, including merchantability and fitness for a particular purpose, is limited to five years. Leviton
is not liable for incidental, indirect, special, or consequential damages, including without limitation, damage to, or loss of use of, any equipment, lost sales or profits or
delay or failure to perform this warranty obligation. The remedies provided herein are the exclusive remedies under this warranty, whether based on contract, tort or otherwise.
FOR CANADA ONLY
For warranty information and/or product returns, residents of Canada should contact Leviton in writing at Leviton Manufacturing of Canada Ltd to the attention of the Quality
Assurance Department, 165 Hymus Blvd, Pointe-Claire (Quebec), Canada H9R 1E9 or by telephone at 1 800 405-5320.
FCC COMPLIANCE STATEMENT
Contains: SZV-STM300U
The enclosed device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(i.) This device may not cause harmful interference
(ii.) This device must accept any interference received, including interference that may
cause undesired operation.
Any changes or modifications not expressly approved by Leviton could void the user’s
authority to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
IC COMPLIANCE STATEMENT
Contains: 5713A-STM300U
This device complies with Industry Canada license-exempt RSS standard(s). Operation
is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
IMPORTANT! Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
This Class B digital apparatus complies with Canadian ICES-003.
TRADEMARK DISCLAIMER: Use herein of third party trademarks, service marks, trade names, brand names and/or product names are for informational purposes only, are/may
be the trademarks of their respective owners; such use is not meant to imply affiliation, sponsorship, or endorsement.
WEB VERSION