For Technical Assistance Call:
1-800-824-3005 (U.S.A. Only)
www.leviton.com
LIMITED 2 YEAR WARRANTY AND EXCLUSIONS
Leviton warrants to the original consumer purchaser and
not for the benefit of anyone else that this product at the
time of its sale by Leviton is free of defects in materials
and workmanship under normal and proper use for two
years from the purchase date. Leviton’s only obligation is
to correct such defects by repair or replacement, at its
option,ifwithinsuchtwoyearperiodtheproductisreturned
prepaid, with proof of purchase date, and a description of
the problem to Leviton Manufacturing Co., Inc., Att:
Quality Assurance Department, 59-25 Little Neck
Parkway, Little Neck, New York 11362-2591. This
warranty excludes and there is disclaimed liability for labor
for removal of this product or reinstallation. This warranty
is void if this product is installed improperly or in an
improper environment, overloaded, misused, opened,
abused, or altered in any manner, or is not used under
normal operating conditions or not in accordance with any
labels or instructions. There are no other or implied
warranties of any kind, including merchantability and
fitness for a particular purpose, but if any implied warranty
is required by the applicable jurisdiction, the duration of
any such implied warranty, including merchantability and
fitness for a particular purpose, is limited to two years.
Leviton is not liable for incidental, indirect, special, or
consequential damages, including without limitation,
damage to, or loss of use of, any equipment, lost sales or
profitsordelayorfailuretoperformthiswarrantyobligation.
The remedies provided herein are the exclusive remedies
under this warranty, whether based on contract, tort or
otherwise.
DI-000-NE200-00A-Pilot
Infrared Remote Control
Cat. No. NE200
For use with Leviton
Infrared Receiving Devices
INSTRUCTIONS
DI-000-NE200-00A-Pilot
Figure 1 - Remote Control Top
Figure 2 - Remote Control Bottom
FEATURES
• Handheld remote for easy lighting control.
• Enables settings of Infrared receiving Lighting Systems. Can be used to program settings.
• Works up to 40 feet away from Infrared receiving device.
• Red LED on the front lights to indicate operation.
INTRODUCTION
The Leviton Infrared Remote Control, Cat. No. NE200, allows easy control of a Leviton Lighting
System up to 40 feet from a Leviton Infrared-Receiving Device. The Remote Control has four
programming button capabilities; four (1-4) presets, ON, OFF, DIM and BRIGHT to provide simple
control of Leviton’s Lighting Systems (refer to Figure 1).
DESCRIPTION
The Remote Control has a user-friendly design to ensure comfortable hand-held usage. It is a
component of a Leviton Lighting System and provides remote user control of the lights when used
in conjunction with a Leviton Infrared-Receiving Device. The Remote provides the ability to program
multiple light levels for the Lighting System. The Remote uses fourAAA batteries*.
*Batteries not included
TO OPERATE
Open back cover of the Remote Control (refer to Figure 2). Insert Batteries as shown. Close back
cover. Remote should be pointed in the direction of the Infrared receiving device and no more than
40 feet away.
ON: Press the ON button. The lights will fade ON.
OFF: Press the OFF button. The lights will fade to OFF.
BRIGHTEN: Press and hold the button to the desired light level.
DIM: Press and hold button to the desired level.
PRESETS 1, 2, 3, 4: Press the 1, 2, 3, or 4 button to have your lights fade ON to a user
programmable preset level.
PROGRAMMABLE LIGHT LEVELS:
MAX: The maximum level the power pack will adjust the lights to.
MIN: The minimum level the power pack will adjust the lights to.
LIGHT MAINTAIN: The Light Maintain level is the amount of light that the Lighting System will
maintain in the room. The Lighting System maintains a programmed light level by adjusting the
lights to compensate for the ambient light present in the room. If the room is very bright (mid-day),
the lights will automatically adjust to a DIM level. If the room is dark (evening and morning), the
lights will automatically adjust to a BRIGHT level.
PRESETS: User programmable preset light levels.
PROGRAMMING:
See Instruction Sheet for the specific Leviton Infrared-Receiving Device that is being used in
conjunction with Remote.
NOTE: Any level can be programmed or reprogrammed at any time.
TROUBLESHOOTING
• If the LED does not light when button is pressed; there is no power.
- Check Batteries
• If the LED does light, check that the IR Receiving enabled device is installed properly, powered
and functioning (refer to the specific IR Receiving Device Instruction Sheets).
Refer to Technical Manual for Troubleshooting and System Installation details.
Programming Buttons
Preset Buttons
ON/OFF Buttons
DIM/BRIGHT Buttons
Battery Replacement
DI-000-NE200-00A-Pilot1 9/21/01, 4:36 PM1
