Leviton OSC04-ISW Operation manual

PRODUCT DATA
Leviton Mfg. Co., Inc. Lighting Management Systems
20497 SW Teton Avenue, Tualatin, OR 97062 1-800-736-6682 Tech Line: 1-800-959-6004 Fax: [phone] www.leviton.com/lms
© 2009 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
Sector Occupancy Sensors
Sector Occupancy Sensors
Passive infrared and multi-technology occupancy sensors
for the Sector Intelligent Lighting Control System
DESCRIPTION
The Leviton Sector PIR Occupancy Sensor
(OSC04-ISW) and the Multi-Technology
Occupancy Sensor (OSC20-MSW) are low-
voltage occupancy sensors that work in
conjunction with a Sector Bus Controller
(SBP00-00M) to activate light switching in
response to room occupancy within a Sector
Intelligent Lighting Control System. These
sensors are part of a system that turns lights
on and keeps them on while movement is
detected within the sensor’s range, and
conversely turns lights off when motion is no
longer detected for a specified period of time.
The Sector Occupancy sensors use a small semi-
conductor heat detector located directly behind
a multizone Fresnel optical lens . The overall
range of the sensor can be configured and man-
aged remotely using the SectorNET graphical
user interface (GUI). The sensor responds to
heat emitted by the human body within the
range of detection.
Leviton’s Multi-Technology Occupancy Sensor
(OSC20-MSW) features both infrared and
ultrasonic sensing capabilities to automatically
control lighting. This sensor takes advantage of
the latest microprocessor-based technology to
continually adjust and optimize its performance
to changing conditions. Ultrasonic technology
detects motion (including small motion) by noting
changes in reflected sound waves. Infrared tech-
nology detects movement of heat-emitting
bodies. The combination of technologies yields
a sensor with maximum sensitivity that is not
prone to false triggers from air conditioning or
other small vibrations.
APPLICATIONS
The Leviton Sector Occupancy Sensors are
ideal for use in office buildings, schools, medical
offices, restaurants, and government facilities
a nd any other location that could benefit from
the cost savings and energy efficiency of a con-
trolled lighting environment.
The Sector family of products provides a scalable
solution that allows you to install a maximum of
253 Bus Controllers, controlling a maximum of
64 devices each, for complete system flexibility
and maximum coverage in any application.
• Passive Infrared Technology (PIR)
• Ultrasonic Motion Detection
(OSC20-MSW)
• Simple, Fast Installation
• Ballasts, occupancy sensors, and
control stations connect on a sin-
gle bus, topology-free, and polar-
ity-free, two conductors
• Compatible with Class 1 and
Class 2 Wiring
• Self-Adjusting
• Digital Technology, Complete
Reliability
• Ceiling Mount
• Non-Volatile Memory
• Remote or Manual Configuration
Capability
• Adjustable Ambient Light Control
Passive Infrared
Multi-Technology

PRODUCT DATA
Sector Occupancy Sensors
FEATURES
• Reduces Energy Costs: using the Sector
Occupancy Sensors in a Leviton Sector Lighting
Control System can reduce energy costs from 34%
to 60%
• Smart Settings: continuously analyze and adjust
sensitivity, timer operation and long-term perfor-
mance for a hassle-free lighting environment
• Self-adjusting: continuously analyzing, learning
and adapting to patterns of occupancy in a facility
• Fast, Simple Installation: easy ceiling mount,
2-wire connection (low voltage) and twist-lock sen-
sor attachment
• Topology-Free: ballasts, occupancy sensors, and
control stations connect on a single bus, topology-
free, and polarity-free, two conductors
• Custom or Smart Delay-Off: manual (and self-
adjusting) delay-off settings from 30 seconds to
30 minutes
• Unobtrusive: small, tasteful unit blends in with
any décor
• Maximum Reliability, Minimum Cost: all digital
circuitry uses a minimum of components
• Flexible Installation: compatible with Class 1 and
Class 2 wiring specifications, and Wiremold surface
raceways for mounting to hard ceilings
• Non-Volatile Memory: learned and adjusted
settings saved in protected memory are not lost
during power outages
• Walk-Through Feature: increased energy savings
by not leaving the lights ON for an extended period
after only momentary occupancy
• Ambient Light Control: includes Manual-ON
and Always-ON
0
20
8
16
16
11.5
11.5
20
SIDE VIEW
TOP VIEW
03 35.5 5.59 9 1111 5151 0202
32 32
5.225.22
OSC20-MSW
Minor Motion, IR
Major Motion, IR
0
12
5
5
12
0
SIDE VIEW
TOP VIEW
7
712
521 9
53
3
9
8
OSC04-ISW
FIELD-OF-VIEWS

Maximum number of
Ballasts per circuit is
based on Ballast type
Electrical
Junction
Box
CAT5 or Better
LumaCAN Network
Cable
Up to 64*
Devices per
Controller
* 9 Sector Devices are
shown in this diagram
Maximum number of
Ballasts per circuit is
based on Ballast type
Power Circuit
From
Distribution
Panel
H N G
*OCCUPANCY SENSOR
*2 BUTTON
SWITCH
*5 BUTTON
SWITCH
To Additional
Bus Controllers
CAT5 or Better
LumaCAN Network
Cable
Can Be Run
In The Same
Conduit or
Cable
BR
BR
BR
BR
BR
BR
BR
BR
*PHOTOCELL
BR
BR
Class 1 Remote
Control Circuit
BR
BR
Can Be Run
In The Same
Conduit or
Cable
BK
G
BK
G
*SECTOR BALLAST
BK
G
BR
BR
V
GY
R
R
Y
BL
Y
BL
*SECTOR BALLAST
BK
G
BR
BR
V
GY
R
R
Y
BL
Y
BL
*SECTOR BALLAST
BK
G
BR
BR
V
GY
R
R
Y
BL
Y
BL
Test Button
(Black)
Termination
Button
(Blue)
BR
BR
*LOW VOLTAGE
INTERFACE
Low Voltage Input Devices
by Others
Switches
Occupancy Sensors
Contact Closures
H N G
Power Circuit
From Distribution
Panel
24v DC
Adaptor
Optional
+24v DC
BK
V
BL
GY
G
WH
WH
WH
0-10V BALLAST
CONTROLLER
WH
Power Circuit
From Distribution
Panel
H N G
WH
WH
WH
*BUS CONTROLLER
24v DC
Power Supply
(optional)
0-10V BALLAST
Leviton Mfg. Co., Inc. Lighting Management Systems
20497 SW Teton Avenue, Tualatin, OR 97062 1-800-736-6682 Tech Line: 1-800-959-6004 Fax: [phone] www.leviton.com/lms
© 2009 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
Sector Occupancy Sensors

PRODUCT DATA
leviton specification submittal
JOB NAME: CATALOG NUMBERS:
JOB NUMBER:
G-8113A/J9-cds
REV OCT 2009
Leviton Manufacturing Co., Inc. Lighting Management Systems
20497 SW Teton Avenue, Tualatin, OR 97062
Telephone: [phone] • FAX: [phone] • Tech Line (6:00AM-4:00PM P.S.T. Monday-Friday): 1-800-959-6004
Leviton Manufacturing of Canada, Ltd.
165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9 • Telephone: [phone] • FAX: [phone]
Leviton S. de R.L. de C.V.
Lago Tana 43, Mexico DF, Mexico CP 11290 • Tel. [phone] • FAX: [phone] • www.leviton.com.mx
Visit our Website at: www.leviton.com/lms
© 2009 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
Sector Occupancy Sensors
SPECIFICATIONS
Electrical
• Input Voltage: 34-42VDC, 277VAC tolerant
• Wires (2): Brown wires; polarity-free
Environmental
• Operating temperature range: 32°F - 104°F
(0°C - 40°C)
• Relative humidity: Up to 95%, non-condensing
• Usage: Indoors only
Physical
• Size: 4.5” dia., 1.5” H (114mm, 38mm)
• Weight: 5 oz. (142 g)
• Housing construction: High-impact, injection
molded plastic
• Color: White
• Leads: color coded, 6” (16.24cm)
Listings
• IEC61000-4-2
Warranty
• Limited 5-year warranty
The following components are also part of the Leviton Sector Intelligent Lighting Control System:
• Sector Ballasts (T8, 17W/25W/32W): SD1F8-17M, SD1F8-25M, SD1F8-32M, SD1J8-17M, SD1J8-25M,
SD1J8-32M, SD2F8-17M, SD2F8-25M, SD2F8-32M, SD2J8-17M, SD2J8-25M, SD2J8-32M
• Sector Bus Controller/Power Supply: SBP00-00M
• Sector Photocell: ODC0P-0SW
• Sector 5-Button Digital Switch: SDS00-15W
• Sector Handheld Remote: SHH00-000
• SectorNET Software and USB-to-LumaCan Adapter: SLM00-000, SIF00-000, SIFPD-000
• Sector Ballast Controller: SBCS0-000, SBCS0-001
• Sector 4-Module Enclosure (to hold a maximum of 4 Bus Controllers (SBP00-000)): SEN04-000
oRDeRinG infoRmation
cat. no. DescRiption
OSC04-ISW Sector PIR Occupancy Sensor, White,
450SF
OSC20-MSW Sector Multi-Technology Occupancy
Sensor, White, 2000SF