LG AN-MR18BA User manual

AN-MR18BA
www.lg.com
Please read this manual carefully before using your remote and retain it for future
reference.
Magic Remote
OWNER’S MANUAL
Copyright © 2018 LG Electronics Inc. All Rights Reserved.

2
ACCESSORIES
The remote control image shown may differ from the actual product.
(Depending on country)
Magic Remote and Alkaline Batteries (AA) Owner’s manual
ᯘContents in this manual may be changed without prior notice due to upgrade of product functions.
BATTERY
1. Installing Batteries
ᯘPlease read this manual carefully.
ᯘPress the top of the battery cover, slide it back, and lift the cover as
shown below.
ᯘTo replace batteries, open the battery cover, replace alkaline
batteries (1.5 V, AA) matching and ends to the label inside
the compartment, and close the battery cover. Be sure to point the
remote control at the remote control sensor on the TV.
ᯘTo remove the batteries, perform the installation actions in reverse.
Don’t mix old or used batteries with new ones. Close the cover
securely.
ᯘOpen the battery cover to find the label.
2. Precautions
ᯘAfter replacement of the batteries, pair the remote control and use it in accordance with user manual.
ᯘIf the unit does not operate after replacement of batteries, reattempt pairing in accordance with the user manual.
ᯘIf the remote controller is not being used for prolonged period of time, remove the batteries from the unit.
ᯘDo not dismantle or expose the batteries to heat.
ᯘDo not drop or exert extreme impact on the batteries. This may cause the case to be damaged.
ᯘDo not immerse the batteries in water.
ᯘThere is danger of explosion if batteries are inserted incorrectly.
ᯘProperly dispose of used batteries.
ᯘFailure to match the correct polarities of the battery may cause the battery to burst or leak, resulting in fire,
personal injury, or ambient pollution.

3
REMOTE DESCRIPTION
ᯘThe remote control image shown may differ from the actual product.
ᯘThe order of description may differ from the actual product.
ᯘSome buttons and services may not be provided depending on models or regions.
(POWER)
Turns the TV on or off.
You can turn your set-top box on or off by adding the set-top box to the
universal remote control for your TV.
Number buttons
Enters numbers.
(DASH)
Inserts a (DASH) between numbers such as 2-1 and 2-2.
Accesses the saved channels or programmes list.
Press this button to bring up BML data broadcasting.(Depending on country)
You can access apps or Live TV using the number buttons corresponding to the
features.
(Screen remote)
Displays the Screen Remote.
Accesses the Universal Control Menu in some regions.
(Screen remote)* /
Video/audio descriptions function will be enabled.(Depending on country)
SAP (Secondary Audio Program) feature can also be enabled by pressing the
(Screen remote)* button. (Applicable to North America)
Adjusts the volume level.
(MUTE)
Mutes all sounds.
*
Accesses the Accessibility menu.
Scrolls through the saved channels or programmes.

4
(Voice recognition)*
Once the voice display bar is activated on the TV screen, press and hold the
button and speak your command out loud.
(HOME)
Accesses the Home menu.
(HOME)* /
Shows the previous history.
Displays the set-top box Home menu. (When you are not watching via a set-
top box: the display changes to the set-top box screen.)
Wheel (OK)
Press the center of the Wheel (OK) button to select a menu.
You can change channels or programmes by using the Wheel (OK) button.
(up/down/left/right)
Press the up, down, left, or right button to scroll the menu.
If you press buttons while the pointer is in use, the pointer will
disappear from the screen and the Magic Remote will operate like a general
remote control.
To display the pointer on the screen again, shake the Magic Remote to the left
and right.
BACK
Returns to the previous screen.
BACK
Clears on-screen displays and returns to last input viewing.

5
Shows channels or programmes guide.
(INPUT)
Changes the input source.
(INPUT)*
%JTQMBZTBMJTUPGBMMUIFFYUFSOBMJOQVUT
Streaming Service buttons
Connects to the Video Streaming Service.
(Q. Settings)
Accesses the Quick Settings.
(Q. Settings)*
Displays the All Settings menu.
Coloured buttons
These access special functions in some menus.
Red Button*: Runs the record function. (Depending on country)
Control buttons ( )
Controls media contents.
5&-&5&95CVUUPOT
These buttons are used for teletext.
By zooming in on the selected area, you can view it in full screen.
You can zoom in on the area where the remote control is pointed.
* To use the button, press and hold for more than 3 seconds.

6
USING
1. How to register (pair) or deregister (unpair)
How to register (pair) the Magic Remote
To use the Magic Remote, first pair it with your TV.
1. Put batteries into the Magic Remote and turn the TV on.
2. Point the Magic Remote at your TV and press the Wheel
(OK) on the remote control.
If the TV fails to register the Magic Remote, try again after
turning the TV off and back on.
How to deregister (unpair) the Magic Remote
Press and hold the (HOME) and BACK buttons at the
same time for five seconds, to unpair the Magic Remote with
your TV.
ᯘPressing and holding the button will let you
cancel and re-register Magic Remote at once.

7
2. How to use
ᯘShake the Magic Remote slightly to the right and left or
press (HOME), (INPUT), or (Q. Settings) buttons
to make the pointer appear on the screen.
(In some TV models, the pointer will appear when you turn
the Wheel (OK) button.)
ᯘIf the pointer has not been used for a certain period of time
or Magic Remote is placed on a flat surface, then the pointer
will disappear.
ᯘIf the pointer is not responding smoothly, you can reset the
pointer by moving it to the edge of the screen.
ᯘThe Magic Remote depletes batteries faster than a normal
remote due to the additional features.
PRECAUTIONS TO TAKE
ᯘUse the remote control within the specified range (within 10 m).
You may experience communication failures when using the device outside the coverage area or if there are
obstacles within the coverage area.
ᯘYou may experience communication failures depending on the accessories.
Devices such as a microwave oven and wireless LAN operate in the same frequency band (2.4 GHz) as the
Magic Remote. This may cause communication failures.
ᯘThe Magic Remote may not work properly if a wireless router (AP) is within 0.2 m of the TV. Your wireless
router should be more than 0.2 m away from the TV.
ᯘDo not disassemble or heat the batteries.
ᯘDo not drop the battery. Avoid extreme shocks to the battery.
ᯘInserting a battery in the wrong way may result in explosion.

8
SPECIFICATIONS
CATEGORIES DETAILS
Model No. AN-MR18BA
Range of frequency 2.400 GHz to 2.4835 GHz
Output Power (Max.) 4 dBm
Channel 40 channels
Power source AA 1.5 V,
2 alkaline batteries are used
Operational temperature
range 0 °C to 40 °C