LG GizmoPal 2 Specification sheet

Get To Know Your Device
Para la versión en español, visite
verizonwireless.com/support.
© 2015 VerizonWireless. All Rights Reserved.
MBM65322501 (1.0) H
This booklet is made from 76% post-consumer recycled paper.
This booklet is printed with soy ink. Printed in Korea
GizmoPal 2 is a communicative mobile device worn by children. It follows the
Consumer Product Safety Improvement Act (CPSIA).This is NOT a toy.

Preparing Your GizmoPal 2
1
This quick reference guide will walk you through the following steps to set up your GizmoPal 2:
• Charging
• Turning on
• Activating
• Downloading the app
• Setting up the app

About Your GizmoPal 2
2
USB/Charger
Port
Wristband (Holder)
Speaker
Microphone
Play Button
Call Button
Battery, Call, and
Communication
Icons
GizmoPal 2

Charging Your GizmoPal 2
3
To charge the battery, open the USB/charger port cover and:
1. Plug the charging cord to the GizmoPal 2.
2. Plug the other end of the cord into the charging adapter.
3. Plug the charging adapter into an electrical outlet. The battery charging light will blink red
while your GizmoPal 2 is charging and turn green when it is fully charged.
NOTE:
•Don’tusetheGizmoPal2whileit’sbeingcharged.
•OnlyusethechargingcordandadapterincludedintheboxtochargeyourGizmoPal2.
•MakesurethatyousnapclosedtheUSB/chargerportcovercompletelytokeepoutdirtandwater.

Turning Your GizmoPal 2 On and Off
4
Turning your GizmoPal 2 on:
• Press and hold the Play button until all of the icons light up and your GizmoPal 2 says
“Hello”.
Turning your GizmoPal 2 off:
• Press and hold the Play button until the voice prompts you to press the Play button
again to turn off your GizmoPal 2.
• You can also use the GizmoHub app to turn off the GizmoPal 2 from your smartphone.

Activating Your GizmoPal 2
5
1. Your GizmoPal 2 should start activating automatically the first time you turn it on.
YourGizmoPal2shouldsay,“I’msettingup.Thiscouldtakeafewminutes.”
2. Then, your GizmoPal 2 will turn off and on by itself.
3. Whenactivationiscomplete,yourGizmoPal2willsay,“Yay!I’mready.”
NOTE:
OnceyourGizmoPal2isactivated,theupanddownarrowswillblinkgreenevery20seconds.
If activation fails, your GizmoPal 2 will tell you something went wrong and the up and down arrows will blink red
every 2 seconds. You can try to activate again by pressing the Call button .

Registering as a Caregiver
6
Step 1: Using your smartphone, download the GizmoHub app from the Google Play Store or the Apple
App Store.
Apple App StoreGoogle Play Store
NOTE: Data usage applies for app download and use.

7
Step 2:Opentheapponyoursmartphone.
NOTE: Descriptions and screen images in this user guide may differ due to GizmoHub app updates.

8
Step 3: Follow the instructions in the app and the voice instructions on your GizmoPal 2 to:
• Register as the primary caregiver
• Add additional contacts
YouwillbeaskedforyourGizmoPal2’smobilenumber.Youcanndthemobilenumberonyour
customer receipt or by pressing either button ( or ) on your GizmoPal 2 after it has been
activated.

Wearing Your GizmoPal 2
9
• Your GizmoPal 2 comes pre-inserted in a wristband.
• Your GizmoPal 2 needs to stay in the wristband to work. It will let you know if it comes out of
its holder.
NOTE: Additional wristbands sold separately.