LG Watch Urbane User manual

www.lg.com
QUICK START GUIDE
MBM65358801 (1.1) H Printed in Korea
ENGLISH
ESPAÑOL

This booklet is made from 92% post-consumer recycled paper.
This booklet is printed with soy ink.

1
About Your Watch ENGLISH
Your watch comes with the SIM card pre-installed.
Power Button
Contacts Button
LG Health Button
FRONT
Touch Screen

2
Warning
• Keep the microphone and barometer holes clear.
• Any damage to the Barometer or Microphone resulting from any accident, unreasonable use,
tampering or other causes not arising from defects in material or workmanship may void the
Limited Warranty.
• See the user guide for information on removing the SIM card cover.
About Your Watch
Microphone
Heart Rate Sensor
Barometer
SIM Card Cover
Charging Terminals
BACK

3
Charging the Watch
Beforeusingyourwatchforthersttime,youshouldchargethebattery.
• Use the charging cord provided
with your watch to charge its
battery.
• Connect the charging cord to a
power outlet and connect it
to the watch by aligning the
charging terminals. The watch
will turn on automatically.
• To maximize battery life, make
sure that the battery is fully
charged before you use it for
the first time.
Charging
Terminals

4
Charging Mode
Warning: Take these precautions to avoid corrosion of the charging terminals
• Exposure to sweat or other foreign material during the use of the product may cause the charging
terminals to corrode while charging.
• To prevent this, wipe the charging terminals with a cloth before charging.
While your watch is charging, the screen will show the time, battery
percentage and charging progress (indicated by the ring around the
outside).
Time
Battery Percentage
Charging Progress

5
Turning on the Watch Turning off the Watch
To turn on the watch, press and
hold the Power Button (on the
right hand side of the watch) for a
few seconds.
Power Button
Press and hold the Power
Button until the apps list
appears.
Tap Settings > Power off.
When prompted with the
message Power off: Are you
sure?, tap .

6
Setting up Your Companion Device
Before pairing, please do the following on your smartphone or tablet.
NOTE
• To make calls with your watch, your companion device needs to be an Android smartphone.
Make sure the companion device is running Android 4.3 or higher and
supports Bluetooth®.
• If your companion device is not Android 4.3, or later, please check
with your manufacturer for a possible software update.
Make sure your companion device supports Android Wear.
• To find out, visit http://g.co/WearCheck from your companion
device.
Turn on Bluetooth on your companion device if it isn’t already on.

7
Setting up Your Companion Device
Make sure your companion device is next to your watch.
On your companion device, download the Android Wear app from
the Play Store and install it. Check that the Android Wear app
is installed and updated to the latest version.
On your companion device, make sure you are using the most recent
version of Message+ as your default messaging app. (You can
check for updates in the Play Store .)
If you’re connecting your watch to a smartphone, make sure
Advanced Calling is turned on. On your phone, go to Settings >
Advanced Calling > Activate Advanced Calling.

8
Make sure your companion device is connected to mobile data or
Wi-Fi.Youneedadataconnectiontosetupyourwatchfortherst
time.
Keep your watch charging during setup.
NOTE
• Your watch will turn on automatically while charging. Depending on the software installed on
your watch, it may automatically download and install an update.
• Depending on the network connection, the setup process might take over 20 minutes.
Setting up Your Companion Device