Life Span XT-35 User manual

OWNER’S MANUAL
IMPORTANT!
PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THE BIKE

Important Safety Information
Please ensure that you read this entire manual and keep this manual
in a safe place for easy reference.
1. It is important to read this entire manual before assembling and using
the equipment. Safe and effective use can only be achieved if the
equipment is assembled, maintained and used properly. It is your
responsibility to ensure that all users of the equipment are informed
of warnings and precautions.
2. Before starting any exercise program, please consult with your doctor
to determine if you have any medical or physical conditions that could
put your health and safety at risk, or prevent you from using the
equipment properly. Your doctor’s advice is essential if you are taking
medication that affects your heart rate, blood pressure or cholesterol
level.
3. Be aware of your body’s signals. Incorrect or excessive exercise can
damage your health. Stop exercising if you experience any of the
following symptoms: pain, tightness in your chest, irregular heartbeat,
and extreme shortness of breath, lightheadedness, dizziness or
feelings of nausea. If you do experience any of these symptoms, you
should consult your doctor before continuing with your exercise
program.
4. Keep children and pets away from the equipment. This equipment
is designed for adult use only.
5. Use the equipment on a solid, flat level surface with a protective cover
for your floor or carpet. To ensure safety, the equipment should have
at least 0.5 meters of free space all around it.
6. Before using the equipment, check that the nuts and bolts are
securely tightened. If you hear any unusual noises coming from the
equipment during use and assemble, stop immediately. Do not use the
equipment until the problem has been rectified.
7. Dress up with suitable clothing while using the equipment. Avoid
wearing loose clothing that may get caught in the equipment or that
may restrict or prevent movement.
8. This equipment is designed for indoor and family use only.
9. To avoid injuries, Care must be taken when lifting or moving the
equipment.
10. Please retain this instruction manual and assembly tools at hand for
quick reference.

Exploded View
1
2
3
4
5
6
10
11
987
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
3
22
23
24
25L
26
27 28
29L
24
25R
24
26
27
28
29R
30
31
32
33
26
27
28
33
35
35
33
2728
34L
35
32
36
33
32
31
30
26
34R
35
32
36
37 38 39
28
39
40L 41
40R
41
41
41
42
4242
43
44L
45 46 47 48 46
58
39 39
63 49
50L
51L
51L
53
54
55
56
56
4142
57L
57R
59 60 61 6260
42 41 59 60 60
61 62 56
56 57L
57R
50R
42
41
48
52R
52R
55
53
54
43
44R
58
41
42
63
39
39 49
30
30
63
63
64
64
64
64
28 28
4546
47
42 4146
28 41 39 39 37
38
65
65
66L
66R
30
4167
68
68
69
69
70
71
73
72
74
71
31
31
31

Part List
No. Description Qty. No. Description Qty.
1 Computer 1 27 Arc washer d8*Φ20*R16*1.5 8
2 Computer wire 1 28 Nut M8 12
3 Sensor wire (middle) 1 29L/R Armrest assemble 2
4 Handle pulse wire 1 30 Bolt M8*16 8
5 Washer d4*Φ12*1 4 31 Spring washer d8 8
6 Bolt M4*12 4 32 Washer d8*Φ25*2 4
7 Handle pulse wire 2 33 Bearing 6003Z 4
8 Foam grip 1 2 34L/R Connecting bar 2
9 End cap Φ32*1.5 2 35 U seat 2
10 Washer d6*Φ12*1 2 36 Bolt M8*20 2
11 Bolt ST4.2*25 2 37 Bolt M8*55 2
12 Front post 1 38 Bushing 1 2
13 Water bottle holder 1 39 Bushing 8
14 Washer d5*Φ12*1 2 40 Pedal arm 2
15 Bolt M5*10 2 41 Flat washer d8*Φ16*1.5 14
16 Water bottle 1 42 Nylon nut M8 6
17 Decoration cover 1 43 Bolt M8*45 4
18 Washer d8*Φ20*1.5 3 44L/R Pedal 2
19 Nylon nut M8 3 45 Bolt M8*80 2
20 Bolt M8*60 3 46 Sleeve 4
21 Sensor wire (lower) 1 47 Bushing 2 2
22 Main frame 1 48 End cap J60*30*1.5 2
23 End cap Φ32*1.5 2 49 Connecting post join 2
24 Foam grip 2 2 50L/R Connecting post 2
25
L/R
Handlebar 2 51 Left decoration bar 1
26 Bolt M8*40 8 52 Right decoration bar 1

53 Nylon nut M10 2
66
L/R
L/R rail 2
54 Washer d10*Φ25*1.5 2 67 Connecting bar 1
55 Bolt ST4.2*16 2 68 Bolt M6*15 12
56 Bolt ST4.2*16 4 69 L shape End cap 2
57 L/R idler wheel cover 2 70 Aluminum rail 2
58 End cap Φ28*1.5 2 71 Square bolt M8*90 2
59 Bushing 3 2 72 Front stabilizer 1
60 Bearing 6000 4 73 End cap with transportation
wheel 2
61 Idler wheel 2 74 AC adapter 1
62 Bolt 2 75 Plastic spacer 2
63 Washer d16 2
64 Arc washer d8*Φ20*R30*1.5 4
65 End cap 2

Assembly tool

Step1:
22
28
64
71
72
a. Secure the front stabilizer (72) to the main frame (22) by using square bolt
(71), nut (28) and Arc washer (64).

Step2:
66L
66R
64 30
30
64
30 41 67 31
a. Secure the L/R rail (66L/R) to the main frame (22) by using bolt (30) and
washer (64).
b. Attach the connecting bar (67) to the main frame (22) with bolt (30), spring
washer (31) and flat washer (41).

Step3:
3
12
17
21
19 18
20
16
13
15 14
22
3
21
a. Slide the decoration cover (17) off the main frame (22) and onto the front
post (12), and then connect the sensor wire (lower) (21) to the sensor wire
(middle) (3).
b. Secure the front post (12) to the main frame (22) by using bolt (20), washers
(18) and nylon nut (19).
C. Attach the water bottle holder (13) to the front post (12) with bolt (15) and
washer (14), and then slide the Water Bottle (16) into place.

Step4:
26
27
28
27
27
28
28
25L 25R
26
26
29R
29L
28 27
26
34L
34R
a. Secure the connecting bar (34L/R) to the armrest assemble (29L/R) by
using bolt (26), Arc washer (27) and nut (28).
b. Secure the handlebar (25L/R) to the armrest assemble (29L/R) by using bolt
(26), Arc washer (27) and nut (28).

Step5:
51L
52R
51L
52R
55
55
66L
66R
50L
50R
22
53
54
53
54
a. Assemble the connecting post (50L/R) to the main frame (22) by using nylon
nut (53) and washer (54).
b. Attach the left decoration cover (51) and right decoration cover (52) to the
connecting post (50L/R) with bolt (55).

Step6:
43 44L 37 41 28
40L
41
41
42 45 42
50L
41 42
50R 41
42
41
42
42
41 45
44R
40L
43
37
41
28
34L
34R
31
31
a. Secure the connecting bar (34L/R) to the connecting post (50L/R) by using
bolt (45), washer (41) and nylon nut (42).
b. Secure the pedal arm (40L/R) to the connecting bar (34L/R) by using bolt
(37), washer (41) and spring washer (31).

c. Attach the pedal（44L/R）to the pedal arm（40L/R） with bolt (43), washer
(41) and nylon nut (42).
Step7:
12
5
6
12
3
4
2
3
a. Connect the computer wire (2) to the sensor wire (3)
b. Secure the computer (1) to the top of the front post (12) by using bolt (6) and
washer (5), and then plug handle pulse wire (4) into the hole of the
computer(1).
Please note: ensure the all parts are fastened to avoid any injury before use.

WARRANTY REGISTRATION
Please visit the following link to complete the product warranty form online. Please visit
http://warrantyform.lifespanfitness.com.au/
PLEASE NOTE: YOUR WARRANTY IS ONLY VALID IF YOU CAN PROVE YOU ARE
THE ORIGINAL PURCHASER ON THIS ITEM (i.e. A copy of the receipt, invoice,
delivery date or internet confirmation).
SERVICING: IF YOU FAIL TO COMPLY WITH LIFESPAN’S MAINTENANCE AND
SERVICING STEPS ABOVE, YOU MAY VOID YOUR WARRANTY. IF YOU REQUIRE A
SKILLED LIFESPAN REPRESENTATIVE TO UNDERTAKE ONE OF THE STEPS ABOVE,
PLEASE EMAIL US AT [e-mail].