Lightmybricks Light Kit for LEGO Star Wars The Razor Crest... User manual

INSTALLATION GUIDE 1THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE
Light My Bricks LEGO®Star Wars
The Razor Crest 75292
Light Kit Installation Guide

INSTALLATION GUIDE 2THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE
Hi There, we’re Light My Bricks!
We’re here to help you get started on
the LEGO®Star Wars The Razor Crest
(75292) Lighting Kit.
This PDF details the instructions for
the LED light kit only.
If you run into any issues, please refer
to the troubleshooting section towards
the end of this guide.
Have fun and enjoy!
PACKAGE CONTENTS
PACKAGE CONTENTS:
6 × White 30cm Bit Lights
2 x Cool White 30cm Bit Lights
2 x Red 30cm Bit Lights
2 x Warm White 30cm Large Bit Lights
1 x Warm White Strip Light
1 x 12-Port Expansion Board
1 x NC Push Board
1 x Gun Effects Board
1 x Flicker Effects Board
1 x 5cm Connceting Cable
3 x 15cm Connecting Cables
1 x USB Power Cable
LEGO PIECES:
6 × Trans Clear Round Plate 1x1
2 × Trans Red Round Plate 1x1
2 × Black/Grey Plate 1vx2
1 × Plate 1x6 (Any Colour)

THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 3
Contents 4. Before You Begin
8. Instructions
24. Final Product
25. Troubleshooting
30. Contact
CONTENTS
LEGEND : DISCONNECT DIRECTIONAL
LEGENDE
: TRENNEN DIRECTIONAL
LÉGENDE
: DÉCONNECTER DIRECTIONNEL
LEGGENDA
: SCOLLEGARE
CONNECT / RECONNECT
VERNINDEN / WIEDERVERBINDEN
CONNECTER / RECONNECTER
CONNETTI / RICONNETTI
TURN / FLIP
WENDEN / KIPPEN
TOUR / INCLINAISON
ROTARE / INCLINARE DIREZIONALE
TWIST / BRAID
DREHEN / VERDREHEN
TORSION / TRESSER
TWIST / TRECCIA
POWER ON / TEST
EINSCHALTEN / TESTEN
POWER ON / TEST
POWER ON / TEST

THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 4
LAYING CABLES IN BETWEEN
AND UNDERNEATH BRICKS
Cables can t in between and
underneath LEGO® bricks, plates, and
tiles providing they are laid correctly
between the LEGO® studs. Do NOT
forcefully join LEGO® together around
cables; instead ensure they are laying
comfortably in between each stud.
CAUTION: Forcing LEGO® to connect
over a cable can result in damaging
the cable and light.
CONNECTING CABLE CONNECTORS
TO EXPANSION BOARDS
Take extra care when inserting
connectors to ports of Expansion
Boards. Connectors can be inserted
only one way. With the expansion
board facing up, look for the soldered
“=” symbol on the left side of the port.
The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into
the port. If a plug won’t t easily into
a port connector, do not force it.
Incorrectly inserting the connector
can can result in bent pins inside the
port or possible overheating of the
expansion board when connected.
Before You Begin
BEFORE YOU BEGIN

THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 5
CONNECTING CABLE CONNECTORS
TO STRIP LIGHTS
Take extra care when inserting
connectors to ports on the Strip
Lights. Connectors can be inserted
only one way. With the Strip Light
facing up, ensure the side of the
connector with the wires exposed is
facing down. If a plug won’t t easily
into a port connector, don’t force it.
Doing so will damage the plug and
the connector.
CONNECTING MICRO CABLE
CONNECTORS TO MICRO
EXPANSION BOARD PORTS
Take extra care when inserting the
micro connectors to micro ports of
Micro Expansion Boards. Connecting
Micro Bit Lights to Micro Expansion
Boards is similar to connecting lights
and cables to Strip Lights. With the
expansion board facing up, ensure the
side of the connector with the wires
exposed is facing down. If a plug won’t
t easily into a port connector, do not
force it. Use your ngernail to push
the plastic part of the connector to the
micro port.
Before You Begin
BEFORE YOU BEGIN

THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 6
INSTALLING BIT LIGHTS UNDER
LEGO® BRICKS AND PLATES
When installing Bit Lights under
LEGO® pieces, ensure they are placed
the correct way up (Yellow LED
component exposed). You can either
place them directly on top of LEGO®
studs or in between.
Before You Begin
BEFORE YOU BEGIN

INSTALLATION GUIDE 7THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE
Instructions To ensure a smooth
installation of your light kit,
please read and follow each
step carefully.
If you run into any issues,
please refer tothe online
troubleshooting guide.
STEPS

THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 8
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
12
STEPS
Cool White 30cm Bit Light
x2
Trans Clear Round Plate 1x1
x2

THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 9
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
3 4
STEPS
White 30cm Bit Light
x2
Trans Red Round Plate 1x1
x2

THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 10
5
STEPS
12-Port Expansion Board 6
USB Power Cable
If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies
(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
Connect to a USB
Power Bank or Wall
Adaptor
(each sold separately)

THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 11
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
7
STEPS
Red 30cm Bit Light

THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 12
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
8
STEPS
Gun Effects Board
Red 30cm Bit Light

THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 13
9
STEPS
If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies
(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
15cm Connecting Cable
Ensure the cable is
connected to the
OUT port (+5v)

THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 14
10
STEPS
If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies
(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.
White 30cm Bit Light
x2
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
Trans Clear Round Plate 1x1
x2
x 2
11

THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 15
12
STEPS
If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies
(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.
White 30cm Bit Light
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 16
13
STEPS
Trans Clear Round Plate 1x1
If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies
(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
White 30cm Bit Light

THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 17
14
STEPS
If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies
(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.
Flicker Effects Board
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
Trans Clear Round Plate 1x1
Connecting Cable 15cm
Ensure the cable is
connected to the
IN port

THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 18
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
STEPS
15
Warm White 30cm
Large Bit Light
x 2
Ensure the cable is
connected to one
of the OUT ports
16

THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 19STEPS
17 18
Plate 1 x 2
Ensure the cable is
connected to one
of the OUT ports
Plate 1 x 2
If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies
(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 20
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
STEPS
19
NC Push Board
5cm Connecting Cable
20
Ensure the cable is
connected to the
IN port
Connecting Cable 15cm
Ensure the cable is
connected to the
OUT port