Lightolier Lytespan 8603WH User manual

7
4 3/4" O.D.
3/8"
311/16" I.D.
10"
4"
14"
9"
11 1/8"
3 11/16" Dia.
9
9
14
1
12
13 11 10 534
16
15
2
6
TOP VIEW
Lytespan®Accent Lighting System 8603WH
Page 1 o 1 LyteJacks Recessed Power Jack
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte Thomas Company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details o design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division) • A0902
Features
1. Plug Housing: Aluminum die-casting provides support or the plug jack and
canopy.
2. Plug Jack: Molded high heat resistant polymer. Accepts all LyteJack
fixtures.
3. Magnetic Transformer
4. Transformer Housing: Aluminum sheet metal provides maximum heat
dissipation.
5. Thermal Protector
6. Thermoplastic Canopy: Integral color, snaps onto plug housing, covering
the mounting plate. Exposed sur ace o canopy is treated to receive water
base paint.
7. Centering Bushing: Unscrew and remove when using any StyleJack
8. Mounting Plate: Galvanized steel, supports plug housing on mounting
rame.
9. Top Mounting Plate
10. Splice Box Cover: Opens easily, pivoting on a lower hinge. Allows access
or making and inspecting splices, snaps shut.
11. 5/16” Dia. X 20” Metallic Greenfield
12. 90° Fitting
13. Anti Short Bushing
14. (2) 8 32 Screws: Secures plug housing to mounting rame.
15. Splice Box and Mounting Frame: Galvanized steel.
16. Mounting Bars: Steel bars slide open, extend to 27”.
Electrical
Low voltage (12V) magnetic trans ormer contained in an aluminum housing,
120V, 60Hz. input. Complies with UL and National Electrical code requirements
or type Non-IC installation. Rated or through branch circuit wiring. Maximum
o 8 (4 in - 4 out) No. 12, Min. 90°C supply wires.
Dimming
Use only dimmers specially rated or inductive loads (low voltage fixtures
equipped with magnetic trans ormer) such as Lightolier Lytemode, Scenist, and
Compli systems and Lightolier dimmers carrying the su fix VA.
Labels
UL; I.B.E.W.
Catalog No. Finishes Mounting Use With
8603WH Matte White Installs in new ceiling construction. Any Focal Jack or LyteJack fixture with
Max. ceiling thickness 1 1/2”. Insulation must be 12V, 50W to 75W Lamp
8613WH Matte White kept 3” away rom fixture sides and wiring Any Focal Jack or LyteJack fixture with
compartment and must not be placed above fixture 12V, 20W to 50W Lamp
so as to entrap heat.
8603WH
8613WH