Lightolier Calculite C2X21LEDWW User manual

631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • A0808
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Calculite®ColorWash C2X21LEDWW
Page 1 of 2 2 1/2" X 21 1/2" Aperture, LED Color-Changing Adjustable Wall Washer
Lightolier is a Philips group brand
Features
1. Heat Sink Housing: Extruded aluminum, design thermally optimized to
reduce LED junction temperature to maintain light output, color and life.
Matte white or black flange.
2. LED Array: Series of 48 high-power red, green, blue and amber (RGBA)
LEDs generate millions of colors and high quality white light at variable
color temperatures. Static colors and dynamic effects are programmable
by DMX controls. Average expected life, under normal operating conditions
is 50,000 hours with lumen maintenance of 70% of original light output.
Factory calibrated integral color sensor and self-adjusting feedback software
guarantee color consistency over life.
3. Adjustable Reflector Housing: Molded high temperature polymer, matte
white or black finish. Adjusts from 0° - 45° vertically to accommodate various
ceiling heights and luminaire to wall mounting distance to ensure smooth,
even wall washing from ceiling line to floor; built-in vertical angle indicators
aid in aligning multiple luminaires; lockable.
4. MicroBlend optics: Internal collective mixing technology ensures smooth
washing and color uniformity and eliminates undesirable color fringing.
5. Aperture Lens: Tempered glass, fine texture provides additional mixing at
the aperture and minimizes the appearance of the individual RGBA sources.
6. Torsiontite Springs: Secure solid state lighting module tight against ceiling
surface without sagging. Accommodates ceilings from ½” to 2” thick.
7. Power Supply Unit/Slave Control Drive Module: PSU: 120VAC 50/60
Hz., Class 2, high power factor, FCC Class B approved, short circuit protection.
SCD: low voltage DC, provides power and data to control LED array with a
maximum of 8 LED channels. Electronics are enclosed in a black extruded
aluminum housing providing optimal thermal dissipation for reliable operation
and long life. Module is replaceable from below the ceiling.
8. DMX Connectors: Two RJ45 jacks mounted at one end of PSU/SCD
module provide DMX512-In and DMX512-Out connections (see page 2). Uses
standard shielded, plenum rated (required for plenum ceilings), CAT5 round, 8
conductor, twisted pair, network cables (not supplied)
Features (continued)
9. Flexible Metal Conduit/Quick Connector: Quick connector for easy field
data connection.
10.Mounting Frame: 0.048" thk., galv. steel.
11. Mounting Brackets: 0.060" galv. steel, adjust from inside of fixture. Use
3/4" or 1 1/2" lathing channel, 1/2" EMT, or optional mounting bars.
12.T-bar Mounting Clips: Provide quick installation to 1 1/2" to 3" high 2 ft. on
center T-Bar grid ceiling systems without use of tool.
13.Junction Box: UL and cUL Listed for through branch circuit wiring with max.
of (8) No. 12 AWG, 90ºC supply conductors.
14.Thermal Protector: Meets (NEC) UL and (CEC) CSA requirements. Insulation
must be kept 3" away from fixture sides and wiring compartments and must
not be placed above fixture in a manner which will entrap heat.
Electrical
120V: Input Watts: Must be circuited for 75W Max.
Labels
cULus Listed for dry locations. I.B.E.W.
Ordering Information
Solid State Lighting Unit Finish Light Source Frame-In Kit Input Voltage
C2X21LEDWWWH Matte White RGBA LED Array C2X21CCLEDWW1 120
C2X21LEDWWBK Matte Black For 277V, use Stepdown Transformer Cat. No. 7997
9 1/4" (235mm)
25 3/4" (654mm)
9 5/8"
(245mm)
12 1/2" (318mm)
3 5/8"
(93mm)
12 1/2" (318mm)
22 5/8" (575mm)
3" (76mm)
2 7/8" (73mm) Max.
11 1
6
4
10
53
12
8
14
2
137
9
1 1/8" (29 mm) Min.
3 1/2" (89mm) Max.
21 1/2" (546mm)
Ceiling Cutouts: 3 3/8" x 22"

Job Information Type:
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • A0808
Calculite®ColorWash C2X21LEDWW
Page 2 of 2 2 1/2" X 21 1/2" Aperture, LED Color-Changing Adjustable Wall Washer
Lightolier is a Philips group brand
Lighting Data (All data is based on 3000K color temperature and 45º tilt)
3' 4'
3'
30'29' 30'
Example: With multiple units located
3' from wall and spaced 4' on center, the
illumination on the wall 3' down from
ceiling will be 30 f.c. beneath units and
29 f.c. between units. Footcandle values
are averaged and rounded off and are
based on a minimum of five units.
Color Temperature: 3000K
Max. Tilt: 45º
Report No: 22906
LIGHTOLIER
LYTEMODEÆ DMX
Control System
Strand Lighting
Accent DMX
DMX512 Out
DMX512 In
DMX512 Out
To Next Luminaire
or
RJ45 DMX Terminator
(Required to terminate
the last luminaire in the
same data line)
Entertainment
Technology
DMX Control
OPTIONS
DMX512
Systems*
RJ45 jacks
Color-Changing Adjustable Wall Washer Color-Changing Adjustable Wall Washer
Other Standard
DMX512
Interface Control
120VAC 50/60HZ. Power Input 120VAC 50/60HZ. Power Input
DMX512 In
RJ45 jacks
CAT5 (8) wires round cable with RJ45 plugs (by others) CAT5 (8) wires round cable with RJ45 plugs (by others)
Lightolier Lytemode
DMX Master Station
DMX512 Out
DMX512 In
Input Power
120 - 240VAC 50/60HZ.
120VAC 60 HZ.
Power Input
DMX512 Out
Shielded CAT5 9 Pin Connector Wiring
ILS Network (optional)
Mini Master
(order seperately)
XLR-5(Femal port)
MARQUEEÆ PC DMX INTERFACE
Stand-Alone
Accent DMX
Connected Console
or Computer to create scenes
* All systems shown are stand-alone. For
additional information and other DMX
systems, please visit http://www.philipsna.com/"
for link to each manufacturer web site.
USB Port to PC
Horizon 512 Channel DMX Interface or others
DMX Interface XLR-5 Port (Female)
Receptacle (By Others)
DMX512 Cable
DMX512 Cable
DMX Network
Accessories
Addressable Interface Kit: Cat. No. CLEDAIK
Load addresses and select operating mode for
DMX protocol, load serial numbers and specific
lighting preset, update firmware to each LED
lighting unit
DMX Terminator: Cat. No. CLEDDMXTERM
Stepdown Transformer: Cat. No. 7997.
Supplies
120V fixture from a 277V 60Hz. branch circuit (20
amp. minimum). Can be used up to (4) fixtures (not
to exceed 300W maximum load).
Mounting Bars: 1950 - 18" Set of (2)
1951 - 27" Set of (2)
2' From Wall - Single 2' From Wall - 2' On Center 2' From Wall - 3' On Center 2' From Wall - 4' On Center
1 1 12 56 12 1 1 84 83 84 164 48 64 159 25 59
2 2 17 49 17 2 2 87 87 87 261 56 61 253 34 59
3 2 12 26 12 2 3 57 57 57 338 38 38 331 26 31
42 7 12 7 2 431 31 31 421 21 21 416 15 16
514541518 18 18 512 12 12 5 9 9 9
612321 611 11 11 68786555
711111 7888 7555 7444
811111 8666 8 4 4 4 8 333
901110 9 4 4 4 9 333 9222
3' From Wall - Single 3' From Wall - 3' On Center 3' From Wall - 4' On Center 3' From Wall - 5' On Center 3' From Wall - 6' On Center
1 2 10 25 10 2 1 34 32 34 128 20 28 127 13 27 126 825
2 3 13 27 13 3 2 41 41 41 233 28 33 230 19 30 228 13 28
3 3 13 23 13 3 3 40 40 40 330 29 30 326 21 26 325 15 25
4310 15 10 3431 31 31 423 23 23 419 18 19 417 13 17
53797 3 522 22 22 516 16 16 513 13 13 511 10 11
6 2 4542 6 15 15 15 611 11 11 6999 6 7 7 7
723332 710 10 10 7 7 7 7 7 6 6 6 7 555
812221 8777 8 5 5 5 8 4 4 4 8 333
911111 9 5 5 5 9 4 4 4 9 333 9333