Lightolier DMS01 User manual

DMS01
Decorative, Square Marker LED
Page 1 of 2
Job Information Type:
Job Name:
Cat. No.:
Notes:
3"
(77 mm)
4 ⅛"
(104 mm)
¾"
(18 mm)
3"
(77 mm)
1 ¾"
(45 mm)
3"
(77 mm)
¾" (18 mm)
1 ¾"
(945 mm)
4 ⅛"
(104 mm)
1 1116"
(43 mm)
4 ⅞"
(123 mm)
2
4
Catalog Number Finish Lamp Wattage Color Temp Voltage
DMS01WL Clear with Etched Face LED 1W 3000K 120-240V

DMS01
Decorative, Square Marker LED
Page 2 of 2
Philips Lightolier
e: [email protected]
t: [phone]
w: www.lightolier.com
DMS01 February 23, 2012
Specifications are subject to change without notice.
© Koninklijke Philips Electronics N.V., 2012.All rights reserved.
Job Information Type:
Features
1. Heat Sink/Driver Housing: Die cast aluminum.
2. Lens: Injection molded acrylic sandblasted with clear
polished edges, developed for optimum optical output.
3. Acrylic Mounting Plate: Die cast aluminum.
4. Re-modeler Junction Box: Die cut and formed 16ga.
Galvanized steel. Can be used in new or existing construction.
Electrical
LED: (1) 1W 3000K white LED. Average expected life, under
normal operating conditions is 50,000 hours with lumen
maintenance of 70% of original light output.
Driver: Integral Class 2 power supply.
Voltage: 120V
Electrical (continued)
Output Wattage: 1 W
Input Current (max.): 65 mA
Frequency: 50/60 Hz
Output Voltage (VDC): 4 V
Constant Current: 350 mA
Finish
Lens – Sandblasted acrylic with clear polished edges.
Labels
cULus Listed. Suitable for Wet Locations. Type IC.
Wall mount only.
3"
(77 mm)
4 ⅛"
(104 mm)
¾"
(18 mm)
3"
(77 mm)
1 ¾"
(45 mm)
3"
(77 mm)
¾" (18 mm)
1 ¾"
(945 mm)
4 ⅛"
(104 mm)
1 1116"
(43 mm)
4 ⅞"
(123 mm)
2
4