Lightolier Alter Waves QVL2GPFSS432 User manual

ALTER WAVES QVL2GPFSS432
Page 1 of 2 2'x4' RECESSED DIRECT/INDIRECT FLUORESCENT, 4 LAMP, T8, 5 1/2’’ DEEP
MICROPERFORATED MESH DUAL LATERAL LAMP SHIELD
Mounting Methods / Features Dimensions
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Volts/Ballast:
Lightolier a Genlyte Thomas Company www.lightolier.com
Technical Information: [phone] • Fax [phone]
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902 Folio L90-30
Features
• Efficiency 58.6%.
• Microperforated mesh lamp shields provide soft awareness of light
source.
• Dual-wave shape lateral lamp shields project light upwards to
reflector and provide indirect light.
• 95% reflective Alter soft white paint finish.
• Fully recessed lamp shields and reflector.
• No visible welding, screws, latches, springs, holes, rivets or plastic
supports.
• Optional solid lamp shields.
• Optional curved lamp shields.
• Alter soft white film inside of microperforated mesh lamp shield
conceals lamp image, providing balance between reflected and
direct light.
• Swing-down lamp shield for easy relamping.
• Easy access to ballast.
• Fits standard T-grid, exposed slot-T-grid and drywall ceilings.
• Optional hold-down clips.
ACCESS PLATE
(2) 7/8" K.O.'S
3-13/16"
(97mm)
18-1/4"
(464mm)
47-13/16"
(1215mm)
23-13/16"
(605mm)
5-1/2"
(140mm)
24"(610mm)
BALLAST
Microperforated mesh lamp shield
Suite to standard T-grid ceilings Suite to standard exposed slot T-grid
ceilings
Ceiling compatibility

ALTER WAVES QVL2GPFSS432
Page 2 of 2 2'x4' RECESSED DIRECT/INDIRECT FLUORESCENT, 4 LAMP, T8, 5 1/2’’ DEEP
MICROPERFORATED MESH DUAL LATERAL LAMP SHIELD
Lightolier a Genlyte Thomas Company www.lightolier.com
Technical Information: [phone] •Fax [phone]
631 Airport Road, Fall River, MA 02720 •[phone] •Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902 Folio L90-30
Job Information Type:
SPECIFICATIONS
MATERIALS: One piece chassis constructed from die formed 20 gauge cold rolled
steel. Reflectors - 95% reflectance baked white acrylic matte paint finish. Soft
white acrylic film on inside of lamp shield conceals lamp image.
FINISH: Chassis exterior - phosphate undercoating, baked white acrylic matte
high reflectance paint finish.
ELECTRICAL: Rapid start HPF, thermally protected class “P”ballast. If K.Os are
within 3”of ballast use wire suitable for at least 90C.
LABELS: Listed by
Photometry
Ordering Information
Explanation of Catalog Number. Example: QVL2GPFSS43212004
LPB: Number of lamps per ballast.
FAMILY
QVL: Quality Visual
Waves
LUMINAIRE
WIDTH:
24”
CEILING TYPE:
G = Grid
LAMP SHIELD:
PF = Microperforated mesh
SD = Solid White
LAMP
QUANTITY
4
LAMP
32 = 32W (T8 NOMINAL 48’)
VOLTAGE:
120V
277V
347V
BALLAST:
OC = Magnetic T8
SO = 1 or 2 LPB electronic T8 IS
SR = 1 or 2 LPB electronic T8 RS
PS = PowerSpec HDF Dimming Electronic T8
O4 = Electronic 4 LPB T8 IS
R4 = Electronic 4 LPB T8 RS
OPTIONS:
F = Internal Fusing (consult
factory)
N = Emergency lighting
System (for U.S.)
O = Emergency Lighting System
(for Canada)
R = Radio Interference Filter
QVL 2 G 4 32
SHIELD DETAILING
SS = Lateral Wave Side Shields
SR = Lateral Curved Side Shields