Lilin IPS622M User manual

INSTRUCTION MANUAL
22X D/N WDR 1.3MP HD
Fast Dome IP Camera

1
Executive Summary
LILIN’s H.264 video server or HD fast dome IP PTZ camera uses the latest compression
technologies providing Quadruple Streaming of H.264 and JPEG in different resolutions. LILIN’s
Quadruple Streaming technologies allow transmitting digital video at various bitrate and frame rate to
fit both high and low bandwidth network environment.
Built-in intelligent video analytics engine enables audio and motion detection for extra protection.
These features can be easily interfaced by other applications. Other useful features include
two-way audio, SD card recording (video server), smartphone live access, email snapshot, and
continuous sending JPEG snapshots to an FTP server.
LILIN’s H.264 Video Server and HD fast dome IP camera have the latest technologies video
de-interlace, built-in video analytics, and ONVIF conformant with all these features integrated within
one camera. LILIN’s CMX Software system solution with H.264 video server or HD fast dome IP
PTZ camera series can provide integrated system solution in migrating to IP Video application.
Key Features
 Up to 1.3 mega-pixel 30 FPS encoding capacity
 Support dual encoding format H.264 and JPEG
 Quadruple Streaming technology, 4 concurrent streaming available
 Smartphone live monitoring
 Built-in intelligent video analytics (IVA) engine for audio and motion detection
 IVA alarm notification via Email or FTP
 Two-way audio (for audio models only)
 Bit rate and frame rate adjustable on-the-fly
 Support Android, iPad, and iPhone mobile live monitoring
 DDNS and UPnP supported
 Network time protocol (NTP) supported
 Support PCM/G.711 audio streaming
 Support ONVIF protocol
 Support CMX Software HD 3.6

2
Trademark Acknowledgments
Microsoft, Windows 2000, Windows XP, Windows Vista, Windows 7,ActiveX, and Internet Explorer
are registered trademarks of Microsoft Corporation in the U.S. and/or other countries.
Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun
Microsystems, Inc. in the United States and other countries.
Flash, Macromedia, and Macromedia Flash Player are either trademarks or registered trademarks of
Adobe Systems Incorporated in the United States and/or other countries.
Linux and DynDNS are registered trademarks of the respective holders.
Intel, Pentium, and Intel® Core™ 2 Duo are registered trademarks of Intel Corporation.
FFmpeg is a trademark of Fabrice Bellard, originator of the FFmpeg project.
QuickTime and the QuickTime logo are trademarks or registered trademarks ofApple Computer, Inc.,
used under license there from.
Other names of companies and their products mentioned in this manual may be trademarks or
registered trademarks of their respective owners.
Other References
Smartphone
For smartphone live monitoring, please visit appendix for the details.
LILIN Universal ActiveX Control
Sample code and document are included in product CD and can be downloaded from our company
website.
LILIN HTTP API
For non-ONVIF integration, please see LILIN HTTP API document. We adopt HTTPAPI document
for all LILIN IP cameras.
Caution
 Do not drop or strike this equipment
 Do not install the equipment near any naked flames or heat sources
 Do not expose this unit to rain, moisture, smoke or dust environment
 Do not cover the opening of the cabinet with cloth and plastic or to install this unit in poor
ventilated places. Allow 10cm between this unit and its surroundings
 Do not continue to operate the unit under abnormal conditions such as detection of smoke,
strange smell or no display on screen while power is turned on
 Do not touch the power connection with wet hands
 Do not damage the power cord or leave it under pressure
 Do not operate this unit near magnet, speaker system, etc., to avoid
unnecessary magnetic interference
 Connection cables should be grounded properly

3
Table of Content
Chapter 1 System Overview....................................................................................................................................4
Chapter 2 Before Accessing IP Camera..................................................................................................................5
Chapter 2-1 Configure IP Address Using IPScan Utility .......................................................................................5
Chapter 2-2 Configure IP Address Using HTML Page..........................................................................................5
Chapter 2-3 Internet Browser Setting & Software Component Required..............................................................6
Chapter 2-4 Login ..................................................................................................................................................6
Chapter 3 Start Using the Camera ..........................................................................................................................7
Chapter 3-1 IP Camera Operational HTML Page .................................................................................................7
Chapter 3-2 PTZ Control Panel.............................................................................................................................7
Chapter 3-2-1 PT Mode................................................................................................................................8
Chapter 3-2-2 ePTZ......................................................................................................................................8
Chapter 3-2-3 Camera Control Panel ..........................................................................................................9
Chapter 3-2-4 Two-way Audio......................................................................................................................9
Chapter 3-2-5 Record in a Local PC............................................................................................................9
Chapter 3-3 Configurations....................................................................................................................................9
Chapter 3-3-1 Server Settings....................................................................................................................10
Chapter 3-3-2 User Settings.......................................................................................................................11
Chapter 3-3-3 Timer...................................................................................................................................11
Chapter 3-3-4 System Setting....................................................................................................................12
Chapter 3-4 Network............................................................................................................................................12
Chapter 3-4-1 General Settings .................................................................................................................12
Chapter 3-4-2 DHCP Setting......................................................................................................................13
Chapter 3-4-3 HTTP & RTSP Service........................................................................................................13
Chapter 3-4-4 SMTP Service .....................................................................................................................14
Chapter 3-4-5 FTP Service ........................................................................................................................14
Chapter 3-4-6 DDNS Settings....................................................................................................................15
Chapter 3-4-7 UPnP Settings.....................................................................................................................15
Chapter 3-5 Video Settings..................................................................................................................................16
Chapter 3-5-1 Video General.....................................................................................................................16
Chapter 3-5-2 Weighted Streaming Mode .................................................................................................16
Chapter 3-5-3 Video Quality.......................................................................................................................17
Chapter 3-6 PTZ Settings....................................................................................................................................19
Chapter 3-6-1 General Settings .................................................................................................................19
Chapter 3-6-2 PTZ Advanced Settings......................................................................................................20
Chapter 3-6-3 PTZ Schedule Settings.......................................................................................................23
Chapter 3-7 SD Card Recording..........................................................................................................................23
Chapter 3-7-1. SD Card Recording Setting................................................................................................23
Chapter 3-8 Alarm Settings .................................................................................................................................24
Chapter 3-8-1 Motion/Alarm Setup.............................................................................................................24
Chapter 3-8-2 Alarm (DI) Input Detection ..................................................................................................24
Chapter 3-8-3 Motion Area.........................................................................................................................24
Chapter 3-8-4 Audio Detection...................................................................................................................25
Chapter 3-9. Audio Setting ..................................................................................................................................25
Appendix...................................................................................................................................................................26
Advance Network DDNS and PPPoE Technologies...........................................................................................26
Advance Network Port Forwarding Technology..................................................................................................26
iPhone Access .....................................................................................................................................................26
Android Access....................................................................................................................................................27
Emergency Factory Default .................................................................................................................................28
SD Card Compatibility List...................................................................................................................................28
Specification .............................................................................................................................................................29

4
Chapter 1 System Overview
Chapter 1-1 System Requirements
The IP Camera’s H.264 video compression technology can provide high compression rate and
superior video quality. However, the performance highly depends on both CPU computational
power of a client PC and the network bandwidth for transmitting video streaming. The following
sections specify system requirement for running the H.264 IP Camera:
Chapter 1-2 Software Requirements
Merit LILIN UniversalActiveX software components are required for web interface for displaying
JPEG or H.264 video. When you first time login the IP camera using Internet Explorer, it prompts for
a security warning dialog box for downloading LILIN Universal ActiveX. Please click on Install
button to download.
Flash player is also required for controlling the PTZ device. Please visit
http://www.adobe.com/products/flashplayer to download the software component.

5
Chapter 2 Before Accessing IP Camera
Before accessing to the IP camera, make sure that the camera’s RJ-45 network cable, audio cable,
and IP camera’s power cable are properly installed. For setup IP address, please consult your
network administrator for available IP addresses. The default IP address of IP camera is
192.168.0.200. User can also use default IP address to verify IP camera’s network connection.
Chapter 2-1 Configure IP Address Using IPScan Utility
To configure IP address using IPScan utility, copy IPScan application from installation CD to your
local PC or execute IPScan software from installation CD directly. IPScan utility can also be
downloaded from our company website. To change IP address, subnet mask, gateway, or HTTP
port, please follow steps below:
 Run IPScan utility.
 Click on Refresh button. All available devices get listed in Device list box.
 Select the device item in Device list box.
 Edit or modify addresses in IP, Subnet Mask, Gateway, or HTTP Port edit box.
 Click on Apply button to configure the settings.
 Click on Refresh button to verify the settings.
Chapter 2-2 Configure IP Address Using HTML Page
To change IP address using HTML page, please first type the default IP address, 192.168.0.200, in
Internet browser and follow steps below:
 Logon H.264 HD video server or IP PTZ camera using default username and
password—“admin” and “pass”.
 Click on “Configure” hyper link.
 Click on “Network->General” hyper link.
 Type or modify edit box for IP address, subnet mask, gateway, or HTTP connection port.
 Click on Submit button.
Note:
Make sure that IPScan is version 1.0.0.31 or above.

6
Chapter 2-3 Internet Browser Setting & Software Component Required
Make sure that your Internet Browser allows signedActiveX plug-in running on your PC. Set
“Download SignedActiveX plug-in controls” to “Prompt” and “RunActiveX control and plug-in” to
“Enable” at Internet Explorer->Tools->Options->Security Settings.
After finishing above security settings, accessing IP camera’s live video by default IP address of IP
camera using Internet Explorer will prompt a Security Warning dialog box. Click on OK button to
download the ActiveX directly from H.264 HD video server or IP PTZ camera.
Chapter 2-4 Login
There are two levels of user authentication including administrator and guest for accessing the H.264
HD video server or IP PTZ camera.
The default settings of username and password are described as follows:
Administrator Guest
Username admin guest
Password pass guest
To logon the H.264 HD video server or IP PTZ camera, please type username and password in logon
HTML page and click on Submit button to enter the system.

7
Chapter 3 Start Using the Camera
After login H.264 HD video server or IP PTZ camera as administrator, there are two main
features—system operation and configuration. Operation and configuration features are described
as follows:
Chapter 3-1 IP Camera Operational HTML Page
Operational HTML page layout
1. Camera Control panel—IP camera control panel.
2. LILIN Universal ActiveX control—Display RTSP H.264 or JPEG network video.
3. Profile switching menu—Switching one profile to another
4. Setup menu—IP camera setup menu
5. PTZ control panel
Chapter 3-2 PTZ Control Panel
All the PTZ features are described as follows:
Iris +: Iris large Focus +: Focus far
Iris –: Iris small Focus -: Focus near
Auto Iris:
Set the device to auto
Iris mode.
Auto Focus:
Set the device to auto
focus mode.
Wide: Lens zoom out
Tele: Lens zoom in Preset: Preset points recall
2.
1.
3.
5.
4.

8
Chapter 3-2-1 PT Mode
There are four Pan and Tilt Modes (PT) for users to operate the PTZ device. To select one of the PT
modes, please click on the icon under PT Mode panel.
PT mode
PT mode with speed
Pan mode at absolute position
Pan and tilt modes at absolute position
Chapter 3-2-2 ePTZ
To perform ActiveX ePTZ feature, please use a computer mouse to drag on the ActiveX control.
Lower speed (inner)
Higher speed (outer)
Absolute position
Tilt lens
Absolute position

9
LILIN Universal ActiveX control becomes eZoom mode.
Please use computer mouse pointing to the sub-window of PIP view. Dragging the sub-window can
perform ePan and eTilt. Using mouse scroll button can perform zoom in and out features.
Performing right-mouse click on the video can disable ePTZ feature.
Chapter 3-2-3 Camera Control Panel
Control panel buttons are described as below:
Snapshot: Take a snapshot of the video.
Recording at PC
Speak on: Speak to remote site (for audio model only).
Audio on: Set audio on (for audio model only).
Chapter 3-2-4 Two-way Audio
For two-way audio, please click on Microphone icon for speaking to the remote site. To stop
speaking to the remote site, please click on Microphone icon again.
To listen to the remote site, please click on Speaker icon for listening to the remote site. To
stop listening to the remote site, please click on Speaker icon again.
Chapter 3-2-5 Record in a Local PC
To record into a local PC, please first right-click on LILIN UniversalActiveX control. It shows up in
the setting dialog box. A user can specify the recording path and recording size. Please make
sure that the ePTZ or ROI feature is unchecked for displaying recording setting dialog box by
right-mouse-click.
To playback theAVI video, simply click on Windows Media Player.
Chapter 3-3 Configurations
H.264 HD video server or IP PTZ camera’s administrator can configure the device via standard HTML
web pages. This chapter explains the detail of each configuration setting.
Note: Only IP camera models with audio can support this feature.

10
Chapter 3-3-1 Server Settings
Server settings contain H.264 HD video server or IPPTZ camera server’s system information such as
MAC address, firmware version, users, system timer, and other system settings. To change or to
use these options, please follow the instructions at this section.
MAC Address
Network MAC address of the video server or camera
Firmware Version & OS Version
Firmware update allows a user to upgrade H.264 HD video server or IP PTZ camera’s firmware
remotely. Auser can use firmware version to verify if the device has the latest version.
Device Name
The device name can be used by IPScan utility to identify the H.264 HD video server or IP PTZ
camera To change the device name, enter the name for H.264 D1 video server or IP PTZ camera
and click on Submit button.
Language
Language setting can be changed dynamically.
Display Name
Display camera name.
Display Time
Display camera timer.
Display PTZ OSD
Display PTZ internal OSD (PTZ only).
ActiveX OSD Name
Display camera OSD name on only ActiveX.
Low Latency Mode
Enable:ActiveX will cache 15 frames for smooth video.

11
Chapter 3-3-2 User Settings
There are ten user accounts allowed for the system. Each account can be configured for its access
rights. To add/edit a user, please click onAdd/Edit User button. To access H.264 HD video server
or IP PTZ camera without authentication, set Bypass Logon radio button to ON.
To change account name, please type the new account name in Account edit box. To change new
password, please type the new password in the New Password edit box. Click on Submit button to
update the user settings. To delete a user, please click on “Remove User” button.
Chapter 3-3-3 Timer
H.264 HD video server or IP PTZ camera allows a user to change system timer via standard HTML
web page. To change H.264 HD video server or IP PTZ camera’s system timer, please enter the
date and time in the edit boxes. Click on Submit button to apply this operation.
Synchronize with NTP
To synchronize Internet time system, check Auto Synchronize option to “Every Hour”. H.264 HD
video server or IP PTZ camera synchronizes its system timer with a time server every hour.
Note: Network Time Protocol feature requires Internet connection.
Administrator: Enable or disable setup mode for a
user.
Camera Control Panel: Enable or disable Control
Panel for a user.
PTZ: Enable or disable PTZ feature for a user.
Streaming: Enable or disable a streaming for a user.

12
Synchronize with a PC
A user can synchronize the PC system timer to the IP camera's system timer.
Chapter 3-3-4 System Setting
Load Default feature allows to load manufacturing default. There are certain critical settings such as
IP addresses and video system which are not affected by this operation. To reboot H.264 HD video
server or IP PTZ camera, click on Reboot System hyper link.
To update firmware of H.264 HD video server or IP PTZ camera, please click on Firmware
Update hyper link. Locate “flasham.bin” in your computer by clicking the Browse button. Click
Submit button to finish firmware upgrade. To ensure the quality of transmission, please make sure
that there is no user accessing H.264 HD video server or IP PTZ camera during firmware upgrade.
Chapter 3-4 Network
H.264 HD video server or IP PTZ camera provides Internet protocols including IP, DHCP, and DDNS.
A user can configure these Internet protocol settings. To setup above, please read the following
sections:
Chapter 3-4-1 General Settings
Network general settings are the basic settings connecting H.264 HD video server or IP PTZ camera
to the network. The default IPAddress of H.264 HD video server or IP PTZ camera is
192.168.0.200. A user can use this IP address to verify the network connection between a local PC
and H.264 HD video server or IP PTZ camera using Web Browser.
For local area network configuration, please enter, at least, IP address, Subnet Mask, and Gateway
IP. Click Submit button to update these settings.
Note: In case of forgetting the password, the device is required to send back to our company for a
manufacturing default or read appendix for emergency default.

13
For Internet access configuration, please contact your local ISP for global IP address. Once the
physical Internet connection gets installed, enter IP address (global), Subnet Mask, and Gateway IP
from the ISP.
• Default DNS IP Address—Primary Domain Name Server, the IP address of the domain name
server
• Second DNS IP Address—Secondary Domain Name Server, the IP address of the domain
name server, a backup DNS server for default DNS
• PPPoE Account—Account name of PPPoE service
• PPPoE Password—Password of PPPoE service
Chapter 3-4-2 DHCP Setting
Router, gateway, or other software DHCP servers can dynamically assign an IP address to the H.264
HD video server or IP PTZ camera. There is no need to configure IP address, subnet mask, and
gateway. Since the DHCP may assign a different IP address to the H.264 HD video server or IP
PTZ camera after power off, a user can use IPScan utility to launch Web Browser for searching H.264
HD video server or IP PTZ camera. To enable DHCP, click on DHCP option and click on Submit
button.
Chapter 3-4-3 HTTP & RTSP Service
HTTP protocol is a reliable protocol for sending video streaming. Port forwarding technology can be
used for sending video over Internet. The detail is described in the appendix. For changing HTTP
service’s port number, please consult available port number from your network administrator.
Change the port number at the port field and click on “Submit” button.
Note: Once the DHCP option gets enabled, IP camera of the IP address assigned by DHCP server. This
feature allows only in LAN environment.
Note: For low latency application, please select RTSP/UDP streaming option.

14
Chapter 3-4-4 SMTP Service
Alarm or motion notification feature can send an alarm or motion detection snapshot to an E-mail
account. To enable alarm or motion sending E-mail feature, please setup the following email
accounts.
To send a test snapshot to a SMTP server, please click “Send” button to test and to verify the
connection of the SMTP server.
Chapter 3-4-5 FTP Service
Alarm or motion notification feature can send alarm or motion detection snapshot to an FTP account.
To enable alarm or motion sending FTP feature, please setup the following FTP account information.
 E-mail receiver setting
E-mail address— E-mail address of the
recipient
 E-mail sender setting
E-mail address— E-mail address of the sender
 Auto E-mail sent snapshots—constantly send
JPEG snapshots within E-mail dwell time.
 SMTP server— Sender’s SMTP server
Authorization— SMTP server’s authorization
option if applicable
Authorization account— Account of the SMTP
server
Authorization password— Password of the
account
 FTP server IP/DNS— IP address or domain name
of the FTP server
 Account— Account of the FTP server
 Password— Password of the account
 Directory—File path for storing the JPEG
snapshots
 Prefix—Prefix of the JPEG filename
 Date format—Date format string for the JPEG
filename
 Postfix—Postfix of the JPEG filename
 Auto FTP sent—Constantly send JPEG snapshot
within FTP dwell time.
 FTP sent time—Schedule FTP snapshot at
specific time

15
Send email to Yahoo or Gmail account. Please follow:
 E-mailAddress: Please fill in the SMTP for Yahoo or Gmail account.
 SMTP Server:
For Gmail, please fill in "smtp.gmail.com".
For Yahoo E-mail, please fill in "smtp.mail.yahoo.com".
 SMTPAuthentication: Please check "AUTH SSL".
 SMTP Port:
For Gmail, please fill in "465".
For Yahoo E-mail, please fill in "465".
 Authentication: Select "Enable".
 AuthAccount and Password: Please fill in the E-mail address and password and select
"Submit".
Chapter 3-4-6 DDNS Settings
DNS stands for domain name server, it provides domain name translation service for a device’s IP.
Basically, domain name is easier to remember than numeric values (IP). DNS service requires
service registration and subscription. DynDNS (DDNS) provides domain name service without
subscription.
To use www.ddnsipcam.com, you can use the last 6 digits of the MAC address for the host name and
default account. The default password is "pass". If the IP camera is on Internet with global IP address,
you can access it directly the IP camera by using DDNS host name.
The IP camera tries to automatically register to www.ddnsipcam.com without further registering. For
example, type “24094f.ddnsipcam.com” in a browser with login name “24094f” and password “pass”
for login into the IP camera, if the IP camera is on Internet.
Chapter 3-4-7 UPnP Settings
UPnP service is a plug-n-play protocol. By clicking on network node of Windows File Explorer, you
can find LILIN cameras that are discovered by Windows via UPnP protocol.
Note: DDNS feature requires Internet connection.

16
Chapter 3-5 Video Settings
This section describes the details in setting the H.264 video’s attributes. The settings of bit rate
control, video input, and video resolution can be configured.
Chapter 3-5-1 Video General
For transmitting H.264 video over low bandwidth network such as Internet, please set the bit rate
close to network upload bandwidth. H.264 IP camera can encode video frames based on the bit
rate setting.
Chapter 3-5-2 Weighted Streaming Mode
Weighted streaming mode is activated when an alarm went off. The streaming goes to the
maximum speed, for example 30 FPS. If there is no alarm activity, the streaming stays one frame
per second for saving bandwidth and storage.
 Profiles: Selections of streaming
combination
 Profile Name: Description of the
streaming profile

Compression: compression type of the
streaming profile
 Resolution: the resolution of the
compression
 VBR/CBR: VBR: Video quality
encoding mode/constant bit rate
encoding mode.
 Bit Rate: Maximum bit rate available
for a network connection
 Output Frame Rate: the frame rate of
the profile
 GOP: I frame period per second
 Video Input: sensor input device
 TV System Output: NTSC/PAL video
system

17
Chapter 3-5-3 Video Quality
Under the tab < Video Quality >, there are categories including: < Camera Advanced Ⅰ> and <
Camera Advanced Ⅱ>.
3-5-3.1 Camera Advance Ⅰ
ⅠⅠ
Ⅰ
Camera Advanced ⅠSetting Menu can be found under this path: Video Quality > Camera
Advanced Ⅰ
ⅠⅠ
Ⅰ
In the Camera Advanced ⅠSetups Menu, users can set various camera parameters including
Day/Night (ICR), Mirror and Flip Function. Each setting is specified as follows:
Day/Night
IR Cut removable allows to schedule IR activation by (1) auto, (2) day, or (3) night. When the setting is set to
"Auto", IR activation is according to the light source signal strength automatically switch day (color) or night
(black and white) mode. "Night" setting means that the IR cut feature is removed. "Day" setting means that the
IR cut feature is forced to be always on.
Mirror
Users can change video display type if necessary. If select “ON”, the image will be rotated horizontally.
Flip
Users can change video display type if necessary. If select “ON”, the image will be rotated vertically.
3-5-3.2 Camera Advance Ⅱ
ⅡⅡ
Ⅱ
Camera Advanced Ⅱ Setting Menu can be found under this path: Video Quality > Camera
Advanced Ⅱ
ⅡⅡ
Ⅱ
In the Camera Advanced ⅡSetups Menu, users can set various camera parameters including
Exposure, 3D-DNR, WDR, White Balance, Sharpness, DIS and BLC Function. Each setting is
specified as follows:
Alarm Interval

18
■Exposure
In the Exposure Mode Setting users can select Auto, Shutter, Iris and Fix four modes.
Exposure-Auto Mode
In this mode can adjust the parameter of the Brightness/Flickerless/AGC Limit/Shutter Limit.
Exposure-Iris Mode
In this mode can adjust the parameter of the Brightness/Shutter/Flickerless/AGC Limit.
Exposure-Shutter mode
In this mode can adjust the parameter of the Brightness/Lens Iris/AGC Limit/Shutter Limit.
Exposure-Iris Mode
In this mode can adjust the parameter of the Brightness/Lens Iris/Shutter/AGC/Flickerless.
Brightness
This parameter is to adjust the brightness of the image. (0 to 64)
Lens Iris
This parameter is to set the aperture value. The value of iris is adjustable from F1.6 ~ F32.
Shutter
This parameter is to set the shutter speed. The range of shutter speed is from x256~1/10k.
AGC
The value if gain is adjustable from 0 ~ 42.
Flickerless
Eliminate image flicker.
AGC Limit
This parameter is to set the maximum auto gain control. The value of AGC limit is adjustable from 0~42.
Shutter Limit
The value of Shutter Limit is adjustable from x256 ~ x1.
■3D-DNR
With the 3D Noise Reduction function, the processor analyzes pixel by pixel and frame by frame to
eliminate environmental noise signal so that the highest quality image can be produced even in low light
conditions.
3D-DNR Mode
3D-Digital Noise Reduction mode select.
Select OFF this function off.
Select ON It's always controlled.
Select AUTO It's controlled by darkness when it is dark.

19
3D-DNR LEVEL
When 3D-DNR MODE is ON or AUTO, 3D-DNR reduction level change. Low/Mid/High
■WDR Function
Select D-WDR function. Off/Low/Mid/High
When the high luminance part and the low illumination part are detected, the suppression low illumination
part is raised, and a high luminance part is adjusted in the contrast.
■White balance
A camera needs to find reference color temperature, which is a way of measuring the quality of a light
source, for calculating all the other colors. The unit for measuring this ratio is in degree Kelvin (K). Users
can select one of the White Balance Control modes according to the operating environment.
ATW1 Mode
Auto Tracking White Balance.
ATW2 Mode
Auto Tracking White Balance（a drawing in limitation of the color）.
AWC Mode
Auto White Balance Control（One-Push White Balance).
Manual Mode
In this mode, users can change the White Balance value manually via specifying R gain and B gain; the
range of R/B gain is from 0 to 127.
Indoor Mode
The indoor mode setting.
Outdoor Mode
The outdoor mode setting.
■Sharpness
Increasing the sharpness level can make the image looked sharper; especially enhancing the object’s
edge. The Sharpness value is adjustable from 0 to 14.
■BLC
BLC Mode
Users can choose to activate or disable the BLC function or HLC function.
BLC Level
Select BLC function level (Operational when BLC Mode is ON).
-1：(Weak) ～0：(Default) ～+2：(Strong)
HLC Level
Select HLC function level (Operational when BLC Mode is HLC). The Level range is adjustable from -32 ~
+32
HLC Description:
Possible to see car number plate and other more visible by level control of halation part such as headlight,
and so on.
Chapter 3-6 PTZ Settings
Under the tab <PTZ>, there are categories including: <General>, <PTZ Advance> and <PTZ
Schedule>.
Chapter 3-6-1 General Settings
Preset
The Preset Programming can be found under this path: PTZ> General.