Lilin IPR7424 User manual

66-IPR7428CSE
MERIT LILIN ENT. CO., LTD
http://www.meritlilin.com
D/N 1080P HD Vari-Focal Infrared IP Camera
IPR7424/7428ESX & LR7424/7428EX
Instr uction Man ua l

IMPORTANT SAFEGUARDS
GRAPHIC SYMBOL EXPLANATION
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated "dangerous voltage" within the product's enclosure
that may be of sufficient magnitude to constitute a risk of electric
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
shock to persons.
accompanying the unit.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION：
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS

CAUTION
Do not drop or strike this equipment.
Do not install the equipment near any naked flames or heat
sources.
Do not expose this unit to rain or excessive moisture, avoid
smoke and dust.
Do not cover cloth or to install this unit in poorly ventilated
places.
Do not continue to operate if there appears to be fault.
Do not touch the power connection with wet hands.
Do not damage the power cord or leave it under pressure.
Sensitive electronics inside are vulnerable to excessive shock.
Excessive heat could damage this unit.
Please the camera in an environmental housing for protection.
If the camera gets wet, unplug it and have it checked by
qualified service personnel.
This may lead to overheating.
If the unit ceases to function, contact qualified service
personnel for help.
Risk of short circuit or electric shock.
Risk of fire or shock circuit.

CONGRATULATIONS
Thank you for purchasing this 2 Megapixel HD Infrared
IP Camera. You now own one of the many fine network products
we manufactured. This product has been carefully inspected
under rigid quality control and should reach you in perfect
condition. With reasonable care, it will provide years of reliable
performance.
We recommend that you read this installation and operation
manual thoroughly before installing and operation your new
system.
Here you will find all the information you need to set up and use
the system. If any questions are not answered in the manual,
please contact your dealer.
Before proceeding, please read and observe all instructions and
warnings contained in this manual. Retain this manual with the
original bill of sale for future reference and, if necessary, warranty
service.
When unpacking your new camera, check for missing or damaged
items. If any item is missing, or if damage is evident,
I . Contact your dealer for
assistance.
D/N 1080P
DO NOT
NSTALL OR OPERATE THIS PRODUCT

IPR7424/7428ESX & LR7424/7428EX series is an 2 Megapixel
HD Infrared IP Camera, built-in H.264 AVC(Advanced
Video Coding) video compression. H.264 AVC video compression
engine supports high definition video quality, 1080P(1920x1080)
resolution, bandwidth efficiency with PPPoE and DDNS.
Also it provides higher bit rate of internet and diverse alarm
functions such as movement video detection e-mail or FTP.
Moreover, IPR7424/7428ESX & LR7424/7428EX series can do
remote surveillance with iPad, iPhone or Android cell phone. The
software R&D engineer can use HTTP protocol(HTTPAPI) or
ONVIF protocol to develop related software, and integrate them
with existing application software system.
IPR7424/7428ESX & LR7424/7428EX series is ideal solution for
remote video monitoring via internet.
D/N 1080P
Executive Summary

PART DESCRIPTION & DIMENSION
Unit: mm
SUN SHIELD
TOP COVER
BOTTOM CHASSIS
BRACKET
PAN ADJUSTMENT SCREW
TILT ADJUSTMENT SCREW
WINDOW
105
109
200
231
160
90

FIG. 1 FIG. 2
INSTALLATION
1. Take out the bracket from the box first. Put the power cable and network cable through
the bracket and then fix it to the wall (FIG.1 & FIG.2).
2. Secondly, take out the camera body and open the top cover with screw driver (FIG.3).
FIG. 3
3. Put the power cable and network cable through the bracket rubble first and then go
through the bottom of camera body (FIG.4). Plug and fix the power cable to the
terminal and plug the network cable to RJ-45 connector of the IP camera (FIG.5).

FIG. 4 FIG. 5
L N
Note :
When using two-cord
power cable, please
connect them to
"Live" and "Neutral".
Live
Earth
Neutral
4. Next, use the provided M5.0x10 screws (silver-2pcs) to fix the camera body on the
bracket with screw driver (FIG.6).
5. Loosen the pan and tilt adjustment screw on the bracket to turn the camera body to
the desired angle and then tighten the screw (FIG.7).
F I G . 6
F I G . 7

6. First, adjust the lens on focus and zoom to form the optimal video image after that
tighten the screws (FIG.8).
F O C U S o r Z O O M
Z O O M o r F O C U S
F I G . 8
F I G . 9
7. Replace the top cover and tighten the screws (FIG.9 & FIG.10).
F I G . 1 0
SYSTEM OVERVIEW
Top View Input/Output Device
Component Description
Alarm In/Out & Audio
In/Out Connector
SD Card Connector
RJ-45 Jack
Video Out Jack
Load Default Button
1
2
3
4
5
AUDIO OUT
AUDIO IN
GND
DIN
COM
NO
+5V OUT
GND

1. 2Megapixel D/N 1080P HD
Vari-Focal Infrared IP Camera
2. Instruction Manual
3. CD Software Pack
IPD552EX2.2/4.2 N/P
H.264 HD IP Cameras
INSTRUCTION MANUAL
PRODUCTION COMPONENTS
For connecting IPR7424/7428ESX & LR7424/7428EX series to the network, please
follow one of the system architectures:
(1). Use DC12V power adapter and network switch connected to a network.
SYSTEM ARCHITECTURES
4. L-type Hex Key Wrench
2 Megapixel D/N 1080P
HD Vari-Focal IR IP Camera
PC
LAN LAN / Internet
Non-PoE Switch
AC24V or AC100~240V
D/N 1080P HD Vari-Focal Infrared IP Camera
IPR7424/7428ESX & IPR7424/7428ELSX
Instruction Manual