Lincoln 877 User manual

Page
Section - F22 - 6C
Form 404130
JULY 2010
MODEL 877
METERING CONTROL VALVE
Series “A”
SPECIFICATIONS:
Dial Capacity 32 Ounces - 16 Quarts
Totalizer Quarts
Flow Max. 4 Gallons per min. (15 liters per min.)
Flow Min. 0.4 Gallons per min. (1.5 Liters per min.)
Operating Pressure Max. 1000 PSI (70 Bar)
Operating Temp. Max. 110° F (45° C)
Accuracy +/- 0.65%
Weight 3.3 Lbs. (1.5 Kg.)
Meter Inlet Threads 1/2 NPT
(IOM-094-02 P/N 53400-094
Rev. 2)
New metering systems must be purged prior to installation
of metering control calce to free system of contaminates.
The automatic nozzle requires 60 PSI to open and function
properly. A pump exceeding 60 PSI is required for adequate
flow and proper operation. A pump ratio of at least 3:1 os
recommended.
OPERATION
The meter can handle petroleum products such as automatic
transmission fluid, S.A.E. 5 to 50 weight motor oil, S.A.E. 80 to
240 weight gear oil and antifreeze fluid (ethylene glycol).
The meter can be locked in the on position by engaging the trig-
ger lock, to release the lock the trigger must be depressed thus
releasing the lock. Before each use reset the meter by rotating
the indicator knob counterclockwise to zero.
HOSE
91241
84799 NOZZLE
(NON-DRIP)
90464
SWIVEL
68410
BASIC METER
TURN TO OPEN
NOZZLE
Systems which will be dispensing fluids under pressure
may need to be protected by using a thermal relief kit which
will safely limit the pressures caused by thermal expan-
sion. Please contact your local Lincoln distributor and refer
to Section K5, Page 31 for more details. Failure to include
thermal relief protection may cause damage not covered
under Lincoln’s warranty policy.
WARNING
IMPORTANT NOTE:
©
© Indicates change
Americas:
One Lincoln Way
St. Louis, MO 63120-1578
USA
Phone [phone]
Fax [phone]
Europe/Africa:
Heinrich-Hertz Str 2-B
D-69183 Waldorf
Germany
Phone [phone]
Fax [phone]
Asia/Pacific:
25 Int’l Business Park
#01-65 German Centre
Singapore 609916
Phone [phone]
Fax [phone]
© Copyright 2010
www.lincolnindustrial.com

Page Number - 2 Form 404130
DO NOTTURN POINTER INA
CLOCKWISE DIRECTIONAS THIS
WILLDAMAGEMETER.
The pointer can only be returned to
the zero stop in a counterclockwise
direction after delivery.
Inner circle indexes in full quart to sixteen
quarts.
Outer circle indexes in fourths of one quart.
ITEM DESCRIPTION Part No. ITEM DESCRIPTION Part No.
1 *Shroud Protector 242911 16 Screw 68410-2 (2
)
2 Shroud 68410-12 17 Cam 68410-5
3 Shroud screw 66871 -5 (4) 18 0-ring 68410-4 (2
)
4 Knob assembly 242912 19 Valve trigger assembly 68410-1
5 Inner circle pointer 66871-53 20 **Valve sleeve assembly
6 Dial assembly 68410-26 21 **Valve seatassembly
7 Inner circle pointer cam 66871-50 22 Spring 69304-3
8 Clutch spring 66871-3 23 Screen 68410-27
9 Clutch roller 66871-4 24 0-ring 243176
10 Setscrew 50541 25 Adapter 243175
11 Upper driving pawl worm gear 66871 -54 26 Upperdriving pawl gear assembly 66871-111
12 Inner circle pointer gear 66871-17 27 Chamber & piston assembly 68410-15
13 Spacer 69304-23 28 Housing cap gasket 66871-12
14 Register assembly 69795-3 29 Housing cap 68410-14
15 Packing kit 237388 30 Valve Assembly(Buna-N) 271700
Service Parts
Quantity
* May be purchased separately
** See valve assembly item 30