Lincoln A Series User manual

MAR - 2012 Page
Section - F22 - 16C
Form 404121
MODEL 883
Metering Control Valve
Series “A”
HOSE
236874
INDICATOR
KNOB
90464
SWIVEL
68410
BASIC METER
Systems which will be dispensing uids under pressure may
need to be protected by using a thermal relief kit, which will
safely limit the pressures caused by thermal expansion.
Please contact your local Lincoln distributor and refer to
Service Page Section K5, Page 31 for more details. Failure
to include thermal relief protection may cause damage not
covered under Lincoln’s warranty policy.
Before meter can be placed in service “After Repair”, meter
must be tested and approved in accordance with U.S.
Government’s Weight and Measurements Standards
New metering systems must be purged prior to
installation of metering control valve to free system of
contaminates.
IMPORTANT NOTE:
The automatic nozzle requires 60 PSI to open and function
properly. A pump exceeding 60 psi is required for adequate
ow and proper operation. A pump ratio of at least 3:1 is
recommended.
OPERATION
The meter can handle petroleum products such as automatic
transmission uid, S.A.E 5 to 50 weight motor oil, S.A.E. 80 to
240 weight gear oil and antifreeze (ethylene glycol).
The meter can be locked in the on position by engaging the
trigger lock, to release the lock, the trigger must be depressed
thus released the lock. Before each use, reset the meter by
rotating the indicator knob counterclockwise to zero.
©
SPECIFICATIONS:
Dial Capacity 4 Quarts - 16 Quarts
Totalizer Quarts
Flow Max. 4 Gal. per min. (15 liters per min.)
Flow Min. 0.4 Gals per min. (1.5 liters per min).
Operating Pressure Max. 1000 PSI (70 Bar)
Operating Temp. Max. 110°F (45°C)
Accuracy +/- 0.65%
Weight 3.3 Lbs. (1.5 Kg)
Meter Inlet & Outlet Thds 1/2 NPTF
© Indicates change
TURN TO OPEN
NOZZLE
84799 NOZZLE
(NON-DRIP)

DO NOT TURN POINTER IN A CLOCKWISE
DIRECTION AS THIS WILL DAMAGE METER.
The pointer can only be returned to the zero stop in
a counterclockwise direction after delivery.
Inner circle indexes in ll gal-
lons to sixteen gallons.
Outercircle indexes in fourths
of one gallon.
SERVICE PARTS
Item Description Part Number Item Description Part Number
1* Shroud Protector 242911 16 Screw 68410-2 (2)
2Shroud 68410-12 17 Cam 68410-5
3Shroud Screw 66871-5 (4) 18 O-Ring 68410-4 (2)
4Knob Assembly 242912 19 Valve Trigger Assembly 68410-1
5 Inner Circle Pointer 66871-53 20 **Valve Sleeve Assembly
6Dial Assembly 68410-26 21 **Valve Seat Assembly
7Inner Circle Pointer Cam 66871-50 22 Spring 69304-3
8Clutch Spring 66871-3 23 Screen 68410-27
9Clutch Roller 66871-4 24 O-Ring 243176
10 Set Screw 50541 25 Adapter 243175
11 Upper Driving Pawl Worm Gear 66871-54 26 Upper Driving Pawl Gear Assembly 66871-111
12 Inner Circle Pointer Gear 66871-17 27 Chamber & Piston Assembly 68410-15
13 Spacer 69304-23 28 Housing Cap Gasket 66871-12
14 Register Assembly 69795-3 29 Housing Cap 68410-14
15 Packing Kit 237388 30 Valve Assembly (BUNA-N) 271700
View other fuel transfer and lubrication made by Lincoln on our website.