Lincoln PowerLuber 1400 User manual

Page Number - 4
Models 1400, 1442, 1442E, 1444, 1444E
PowerLuber Grease Gun
Form 404088
Any other use not in accordance with instruc-
tions will result in loss of claim for warranty or
liability.
Service
Tool service must be performed only by quali-
ed repair personnel. Service or maintenance
performed by unqualied personnel may result in
a risk of injury.
When servicing a tool, use only identical
replacement parts. Follow instructions in the
Maintenance section of this manual. Use of un-
authorized parts or failure to follow Maintenance
Instructions may create a risk of shock or injury.
SPECIFICATIONS
Basic PowerLuber Model 1400
Operating Power, Volt 14.4
Maximum Operating Pressure, PSI (bar)
- Low Output - 7,000 (482)
- High Output - 3,000 (206)
Grease Reservoir Capacity, oz. (g) 14.5 (411)
Operating Temperature Range, °F (°C) 0 to 122
(-18 to +50)
Operating Current, Amp 4.0
Rated Current, Amp 5.0
Lubricant (Grease) Up to NLGI #2
Grease output oz./min. (gram/min)
- Low Output (L) 3.8 (108)
- High Output (H) 8.5 (241)
Weight, Lbs. (Kg) 8.0 (3.6)
Accessories:
Battery NiCd Model 1401
Output, VDC 14.4
Capacity, mAh 1700
Battery Charger Model 1410
Charge time 1 Hour
Input, VAC (2.0 A) 120 V, 50-60 Hz
Battery Charger Model 1410E
Charge time 1 Hour
Input, VAC (2.0 A) 230 V, 50 Hz
Outlet Hose Model 1230
Pressure Rating, psi (Bar) 7,500 (510)
Length of the Hose, In (mm) 30 (760)
NOTE: Operating current and grease output data at 1,000
PSI (69 bar).
Models and Components
Sales Model Basic PowerLuber Battery Charger Case
1442 1400 1401 1410 286135
1442E 1400 1401 1410E 286135
1444 1400 1401(2) 1410 286135
1444E 1400 1401(2) 1410E 286135
TOOL USE AND CARE
Do not use tool if switch does not turn it on or off.
A tool that cannot be controlled with the switch is
dangerous and must be repaired.
Do not continue to hold down trigger if grease
gun is stalled. This could damage the motor or
cause re.
Disconnect battery pack from tool before making
any adjustments, changing accessories, or stor-
ing the tool. Such preventive safety measures
reduce the risk of starting the tool accidentally.
Store the tools out of reach of children and other
untrained persons. Tools are dangerous in the
hands of untrained users.
When battery pack is not in use, keep it away
from other metal objects like: paper clips, coins,
keys, nails, screws, or other small metal objects
that can make a connection from one terminal to
another. Shorting the battery terminals together
may cause sparks, burns, or a re.
Maintain tools with care. Check for misalignment
or binding of moving parts, breakage of parts,
and any other condition that may affect the tool’s
operation. If damaged, have the tool serviced
before using. Many accidents are caused by
poorly maintained tools.
Use only accessories that are recommended by
Lincoln.
Only accessories that are capable of handling
7000 PSI (482 bar) should be used. Accessories
that may be suitable for one tool may create a
risk of injury when used on another tool.
Appropriate use
The PowerLuber was exclusively designed to
pump and dispense lubricant using 14.4 volt bat-
tery power. The maximum specication ratings
should not be exceeded.
Extreme pressure may cause nozzle
extension or whip hose to burst. Use only
Lincoln APPROVED hoses and follow whip
hose instructions and warnings.

Page Number - 9
Models 1400, 1442, 1442E, 1444, 1444E
PowerLuber Grease Gun
Form 404088
Figure 5
Don’t allow any liquid to get inside charger.
Electric shock may result. To facilitate the
cooling of the battery pack after use, avoid
placing the charger or battery pack in a
warm environment such as a metal shed or
an uninsulated trailer.
Never attempt to open the battery pack for
any reason. If the plastic housing of the
battery pack breaks or cracks, return to a
service center for recycling.
1401
Battery
1410 or 1410E
Battery Charger
4. The battery pack should be recharged when
it fails to produce sufcient power on jobs.
DO NOT CONTINUE to use under these
conditions. Follow the charging procedure.
You may also charge a partially used pack
whenever you desire with no adverse affect
on the battery pack.
5. Under certain conditions, with the charger
plugged into the power supply, the exposed
charging contacts inside the charger can be
shorted by foreign material. Foreign materi-
als of a conductive nature such as, but not
limited to, steel wool, aluminum foil, or any
buildup of metallic particles should be kept
away from charger cavities. Always unplug
the charger from the power supply when
there is no battery pack in the cavity. Unplug
charger before attempting to clean.
6. Do not freeze or immerse charger in water
or any other liquid.

Page Number - 10
Models 1400, 1442, 1442E, 1444, 1444E
PowerLuber Grease Gun
Form 404088
This manual contains important safety and
operating instruction for Lincoln Model 1410 or
1410E Battery Charger.
SAFETY INSTRUCTIONS FOR CHARGER AND BATTERIES
SAVE THESE INSTRUCTIONS
LENGTH OF CORD IN FEET (M) 25 (7.5) 50 (15) 100 (30) 150 (45)
AWG SIZE OF CORD (mm²) 18 (1) 18 (1) 18 (1) 16 (1.5)
damaged in any way, take it to a qualied
service center.
9. Do not disassemble charger or battery
pack. Take it to a qualied service center
when service or repair is required. Incorrect
reassembly may result in risk of electrical
shock or re.
10. Unplug charger from outlet before attempt-
ing any maintenance or cleaning to reduce
risk of electric shock.
11. Charge the battery pack in a well venti-
lated place; do not cover the charger and
battery with a cloth, etc., while charging.
12. Do not store the charger or battery packs
in locations where the temperature may
reach or exceed 122° F (50° C) such as
a metal tool shed, or a car in the summer
which can lead to deterioration of the stor-
age battery.
13. Do not charge battery pack when the
temperature is BELOW 32° F (0° C) or
ABOVE 104° F (40° C). This is very impor-
tant for proper operation.
14. Do not incinerate battery pack. It can
explode in a re.
15. Do not charge battery in damp or wet loca-
tions.
16. Do not attempt to charge any other cord-
less tool or battery pack with the Lincoln
Model 1410 or 1410E charger.
17. Do not short across the terminals of the
battery pack. EXTREMELY HIGH TEM-
PERATURES COULD CAUSE PERSON-
AL INJURY OR FIRE.
18. This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or in-
struction concerning use of the appliance
by a person responsible for their safety.
19. Children should be supervised to ensure
that they do not play with the appliance.
20. Dispose of expended batteries properly.
The Lincoln Model 1401 and 1801 Battery
Pack contains rechargeable, nickel-
cadmium batteries. These batteries must
be recycled or disposed of properly. Drop
off expended battery packs at your local
replacement battery retailer, or your recy-
cling center.
Users in the United States NOTE:
Applicable fees for the collection and recy-
cling of these batteries have been paid to
the RBRCTM. For further information, call
1-800-8BATTERY.
1. Before using a battery charger, read all
instructions and cautionary markings on
Battery Charger, Battery Pack, and prod-
uct using battery.
2. CAUTION: To reduce the risk of injury,
Lincoln Model 1410 or 1410E Chargers
should only be used to charge Lincoln
battery pack Model 1401 and 1801. Other
types of batteries may burst causing per-
sonal injury and damage. Do not charge
Lincoln Model 1401 or 1801 Battery Packs
with any other charger.
3. Do not expose charger to rain, snow or
frost.
4. Do not abuse cord. Never carry charger by
cord or yank it to disconnect from recep-
tacle. Pull by plug rather than cord when
disconnecting charger. Have damaged
or worn power cord and strain reliever
replaced immediately. DO NOT ATTEMPT
TO REPAIR POWER CORD.
5. Make sure cord is located so that it will not
be stepped on, tripped over, or otherwise
subjected to damage or stress.
6. Do not use an extension cord unless
absolutely necessary. Use of improper
extension cord could result in a risk of re
and electric shock. If an extension cord
must be used, make sure:
A That the extension cord is properly wired
and in good electrical condition.
B Wire size of cord is at least as specied
in following chart:
Risk of Electric Shock 120 VAC or 230 VAC
present at charger terminals. Do not probe
with conductive objects. Do not charge dam-
aged battery. Replace immediately.
C If an extension cord is to be used out-
doors it must be marked with the sufx
W-A following the cord type designations.
For example - SJTW-A to indicate it is
acceptable for outdoor use.
7. Do not operate charger with damaged cord
or plug. Have them replaced immediately,
to avoid a hazard DO NOT ATTEMPT TO
REPAIR POWER CORD.
8. Do not operate charger if it has received
a sharp blow, been dropped, or otherwise

Page Number - 13
Models 1400, 1442, 1442E, 1444, 1444E
PowerLuber Grease Gun
Form 404088
© Indicates change
Service Parts List©
Item now Description Part Number
1 FLEXIBLE HOSE 30” W/GASKET (MODELS 1400, 1442, 1444) 1230
FLEXIBLE HOSE 30” W/GASKET (MODELS 1442E, 1444E) 1230E
2 COUPLER (MODELS 1400, 1442, 1444) 5852
COUPLER (MODELS 1442E, 1444E) 251-10124-7
3 PACKING 34793
4 FOLLOWER ASSEMBLY KIT 93485
5 GREASE TUBE ASSEMBLY 271882
6 GASKET KIT (HOSE) 271884
7 SEAL 271889
8 HANDLE KIT (DGREASE TUBE) 286090
9 ROD, FOLLOWER KIT 286091
10 HOSE CLIP KIT 286092
11 COUPLER CAP KIT 286093
12 TRIGGER KIT 286095
13 TERMINAL ASSEMBLY KIT 286096
14 GEAR SELECTOR KIT 286097
15 HANDLE HARDWARE 286100
16 DECAL KIT 286101
17 MOTOR WITH PLATE 286103
18 PUMP HARDWARE 286105
19 COVER PUMP KIT 286106
20 YOKE KIT 286107
21 STROKE INDICATOR 286108
22 PLUNGER KIT 286109
23 STUD KIT 286110
24 ROLLER 286111
25 SPRING SELECTOR 286113
26 VENT/BULK VALVE KIT 286134
27 CIRCUIT BREAKER KIT 286217
28 DRIVER ASSEMBLY KIT 286285
29 GEAR SET KIT 286286
30 HANDLE WITH ELECTRICAL COMPONENT KIT 286303
31 HANDLE WITH SCREW KIT 286304
32 PUMP ASSEMBLY KIT 286305
33 CHECK VALVE KIT 286306
34 HOUSING PUMP WITH BEARING 286307
35 VENT VALVE KIT 286315
36 GASKET KIT (RELIEF VALVE) 286316
37 RELIEF VALVE KIT 286317
38 BATTERY 14.4V 1401
CHARGER 1410
STRAP 1414
CASE 286135