LINET Eleganza 1 LE User manual

Date 10/2014
Version
01
SERVICE MANUAL
Eleganza 1 LE

Project ELEGANZA 1 LE
Date
10/2014
Version 01
2/22
Eleganza 1 LE –Service Manual
Positionable hospital bed
Author: LINET, s. r. o.
Related links: www.linet.com
Version: 01
Print date: 10/2014
Copyright © LINET, s. r. o., 2014
Translation © LINET, s. r. o., 2014
All right reserved.
All trademarks and brands are the property of the appropriate owners. The manufacturer reserves the right to
changes in the contents of this manual that relate to the product´s technical regulations. It is for this reason that
the contents of this manual may indicate differences from the current manufacture of the product.

Project ELEGANZA 1 LE
Date
10/2014
Version 01
3/22
Contents
1Introduction –General Information................................................................................4
1.1Product label and technical label –location........................................................................................4
1.1.1 Product label description ...............................................................................................................4
1.1.2 Technical label description ............................................................................................................4
1.2Identification of bed parts....................................................................................................................7
1.3List of tools and equipment needed for servicing the bed ..................................................................8
2Technical data..................................................................................................................9
2.1Conditions of use ................................................................................................................................9
2.2Mechanical data..................................................................................................................................9
2.3Electrical data....................................................................................................................................10
3Components...................................................................................................................11
3.1Location and description of parts located on bed .............................................................................11
3.1.1 Electrical components..................................................................................................................11
3.1.2 Mechanical parts ...........................................................................................................................14
4Electrical devices –component connections..............................................................16
4.1Complete wiring diagram ..................................................................................................................16
4.2Equipotential bonding connections (without extension of mattress platform, no antistatic wheel)...17
4.3Equipotential bonding connections (with extension of mattress platform, antistatic wheel).............19
5Bed setting.....................................................................................................................21
5.1Service mode ....................................................................................................................................21
5.2Battery charge status ........................................................................................................................21
6Troubleshooting ............................................................................................................22
6.1Troubleshooting table........................................................................................................................22
6.2Sound signals of the bed...................................................................................................................22
No

Project ELEGANZA 1 LE
Date
10/2014
Version 01
4/22
1 Introduction –General Information
1.1 Product label and technical label –location
1.1.1 Product label description
1.1.2 Technical label description
Model number
Production
(serial) number
Order number
Date of
manufacture
Position of
product label

Project ELEGANZA 1 LE
Date
10/2014
Version 01
5/22
Product Symbols and Labels
Transformer thermal protection
Only suitable for indoor use
Electric shock protection –Applied parts type B
Safety isolating transformer, general
Equipotential equalisation connection
Safe working load
Warning against injury or entrapment
Maximum weight of patient
Only use a mattress recommended by the
manufacturer
Read instructions before use
Warning
TUV mark
Weight of the bed
Do not put any objects here
CE Mark
Warning against crushing or trapping

Project ELEGANZA 1 LE
Date
10/2014
Version 01
6/22
Collapsing sinle collapsible siderail
Collapsing split plastic siderail
1. Forward movement
2. Unrestricted movement
3. Braked
1. Brake
Individual braking procedure
2. Unbrake
Central castor control

Project ELEGANZA 1 LE
Date
10/2014
Version 01
7/22
1.2 Identification of bed parts

Project ELEGANZA 1 LE
Date
10/2014
Version 01
8/22
1.3 List of tools and equipment needed for servicing the bed
Tools (metric)
Socket set
Screwdriver set
Engineer‘s wrench set
Hex key bits set
Torx bits set
Hex key set
Knife
Set of pincers
Torgue wrench
Hammer, nylon hammer
Tape measure
Crimping pincers for RJ connectors
Multimeter

Project ELEGANZA 1 LE
Date
10/2014
Version 01
9/22
2 Technical data
2.1 Conditions of use
2.2 Mechanical data
US parameters
Values
Temperature
+59 °F — +104 °F
Humidity
30 —75 %
Atmospheric pressure
23,476 —31,3 inHg
EU parameters
Values
Temperature
+15 °C — +40 °C
Humidity
30 —75 %
Atmospheric pressure
795 —1060 hPa
Parameters
Values
Outside dimensions (siderails up)
with split plastic siderails
with singlecollapsible siderails
218,5 cm x 99.5 cm
218,5 cm x 99.5 cm
Mattress Platform Extension
14,5 cm
Maximum Mattress Height
16 cm
Mattress Platform Height Adjustment
125 mm castors
150 mm castors
37 cm —73.5 cm
39.5 cm —76 cm
Maximum backrest adjustment
70°
Maximum thighrest adjustment (electric)
34°
Trendelenburg / reverse Trendelenburg position
+15°/-15°
Siderail Height over Mattress Platform (without Mattress)
with split plastic side rail (head/foot)
with single collapsible siderail
with full lenght side rail
38 cm
38,5 cm
38,5 cm
Weight /basic equipment/
135 kg

Project ELEGANZA 1 LE
Date
10/2014
Version 01
10/22
2.3 Electrical data
NOTE Upon request, LINET® can deliver critical care beds with electrical specifications that comply with
regional standards (custom voltage, different mains plugs).
Identification of applied parts (Type B)
Supervisor panel
Handset
Siderails
bed ends
mattress platform
Safe Workload (including mattress and accessories)
125 mm castors without central brake system
125 mm castors with central brake system
with battery
without battery
150 mm castors
with battery
without battery
185 kg (for application envir. 3 only)
250 kg (for application envir. 3 only)
200 kg (for application envir. 3 only)
250 kg
200 kg
Max. lifting pole load
75 kg
Parameters
Values
Input voltage
230 VAC, 50/60 Hz
100 VAC –127 VAC 50/60 Hz
Maximum power input
max. 1,6 A, 370 VA (230 VAC)
max. 3,5 A, 370 VA (100 VAC –127 VAC)
EN 60529 Safety protection
IP X4
Safety class
Class I
Applied parts
Type B
Electrical actuator maximum operating time / cooling
time (duty cycle)
10%, max. 2 min. / out of 20 min.
Fuse
Version 230 V
Version 100 V –127 V
T1.6A L 250 V
T3.15A L 250 V

Project ELEGANZA 1 LE
Date
10/2014
Version 01
11/22
3 Components
3.1 Location and description of parts located on bed
3.1.1 Electrical components
3.1.1.1 Linear actuators (Lifting drives)
1) MCZ 2 400/175 6kN/3kN IP66 2 pcs
2) Deformation rivet 10x50 COC DIN674 (Zn) 4 pcs
3) Starlock 10 deep (Steel, Cr, varnish) 4 pcs

Project ELEGANZA 1 LE
Date
10/2014
Version 01
12/22
3.1.1.2 Mattress platform actuators
1) Linear motor DEWERT 1 pcs
2) Linear motor DEWERT, thighrest, 290/110 connector + cable 58237 (=Dewert 60290) 1 pcs
3) DEWERT motor insert (PP) 1 pcs
4) Deformation rivet 10x40 COC DIN 674 (Zn) 3 pcs
5) Starlock 10 deep (Steel, Cr, varnish) 4 pcs
6) Backrest motor cog (S235JRG2 –11 373) 1 pcs

Project ELEGANZA 1 LE
Date
10/2014
Version 01
13/22
3.1.1.3 Power box
1) MCL II CARE, NR 77170 1 pcs
2) Mains cable 1 pcs
3) MCL II holder 1 pcs
4) Fan shaped washer 6,4 DIN6798A (Steel/Zinc) 2 pcs
5) Connecting screw, M5x16 IMB DIN912 (Steel/Zinc) 3 pcs
6) Self-locking nut, M5 DIN985 (Zinc) 3 pcs
7) Tapping screw M6x10 VALCOC Torx 30 DIN7500-C (Zinc) 2 pcs
8) Distance washer, 5,3 DIN125A (Steel/Zinc) 3 pcs

Project ELEGANZA 1 LE
Date
10/2014
Version 01
14/22
3.1.2 Mechanical parts
3.1.1.4 Castors and antistatic castor
1) Castor –2477PJP125 P30-11 3 pcs
2) Antistatic castor –2470XSP125 P30-11 1 pcs
NOTE: Use castors in position 1for beds without antistatic castor.

Project ELEGANZA 1 LE
Date
10/2014
Version 01
15/22
3.1.1.5 Head bar
1)Toothed washer 6,4/11/0,7 DIN 6798A 1 pcs
2) Earthing pin (Cu- Nickeled) 1 pcs
3) Conrner insert (Pa 6) 2 pcs
4) Distance washer 8,4-24-2 DIN9021 (Steel, Zinc) 4 pcs
5) Corner bumper D100 (PP) 2 pcs
6) distance washer 8,4 DIN125A (Steel, Zinc) 4 pcs
7) Self-locking nut M8 DIN 985 (Zn) 2 pcs
8) Connecting screw M8x60 6HR DIN 931 (Steel,Zinc) 2 pcs
12) Bushing of forehead with aretation (GRILON AZ 3/2 (PA66) RAL 7035) 2 pcs
13) Bushing (11 343) 2 pcs
14) Locking catch (GRILON AZ 3/2 (PA66) RAL 7035) 2 pcs
15) Forehead aretation spring (12 090 ČSN 42 6450 (DIN 17223©, min. Rm = 2230Mpa)) 2 pcs
16) Control (GRILON AZ 3/2 (PA66)) 2 pcs
17) Pin D3 l18 2 pcs
18) Self-stick label –Green lock (Transparent self-stick foil) 2 pcs
19) Self-stick label –Red lock (Transparent self-stick foil) 2 pcs
20) Self-stick label –Removable forehead (PVC transparent, JAC SERILUX 70100, pr.: 90 µm) 1 pcs
25) Bushing of bar (PA 6+15%GF) 2 pcs

Project ELEGANZA 1 LE
Date
10/2014
Version 01
16/22
4 Electrical devices –component connections
4.1 Complete wiring diagram

Project ELEGANZA 1 LE
Date
10/2014
Version 01
17/22
4.2 Equipotential bonding connections (without extension of mattress platform, no antistatic wheel)

Project ELEGANZA 1 LE
Date
10/2014
Version 01
18/22
4) Hexagonal nut closed M5 DIN 986 (Fe,Zinc) 15 pcs
5) Toothed washer,d5.3 D10.0 H0.6 DIN 6797A (Fe, Zinc) 34 pcs
6) Tapping screw cylindric,M5x12, DIN7500 C,Coc, Torx 7 pcs
7) Cable CYA cable shoe 5/5 length 300 mm 1 pcs
8) Cable CYA cable shoe 5/5 length 400 mm 1 pcs
9) Earthing cable,d5 d5 L130 6 pcs
10) potential chain, E1 1 pcs
11) Connection screw M6x16 VAL imbus DIN 7984 (Steel, Zinc) 1 pcs
12) Toothed washer 6.4/11.0/0.7 DIN 6797A (Steel, Zinc) –Galvanized 3 pcs
13) Hexagonal nut, selflocking M 6 DIN 985 (Steel, Zinc) 1 pcs

Project ELEGANZA 1 LE
Date
10/2014
Version 01
19/22
4.3 Equipotential bonding connections (with extension of mattress platform, antistatic wheel)

Project ELEGANZA 1 LE
Date
10/2014
Version 01
20/22
4) Hexagonal nut closed M5 DIN 986 (Fe,Zinc) 17 pcs
5) Toothed washer,d5.3 D10.0 H0.6 DIN 6797A (Fe, Zinc) 38 pcs
6) Tapping screw cylindric,M5x12, DIN7500 C,Coc, Torx 7 pcs
7) Cable CYA cable shoe 5/5 length 300 mm 1 pcs
8) Cable CYA cable shoe 5/5 length 400 mm 1 pcs
9) Earthing cable,d5 d5 L130 6 pcs
11) Tapping screw;M6 L12 DIN 7984|VAL imbus (Fe,Zinc) 1 pcs
13) Hexagonal nut selflocking M 6 DIN 985 (Fe,Zinc) 1 pcs
14) Cable CYA cable shoe 5/5 length 170 mm 1 pcs